Air-breathing cathodes for microbial fuel cells based on iron-nitrogen-carbon electrocatalysts.

This work reports the development of an iron-nitrogen-carbon electrocatalyst (Fe-N-C) synthesized by functionalization of carbon support using low-cost Fe- and N-based precursors in a wet impregnation procedure followed by a pyrolysis treatment under an inert atmosphere. Structure and surface chemistry were investigated by Raman and X-ray photoelectron spectroscopy (XPS), which indicated an efficient interaction of precursors with the carbon support during the wet-impregnations step, which allows obtaining a carbonized material with a high content of active sites based on Fe-N moieties. This led to Fe-N-C materials with high catalytic activity towards oxygen reduction at neutral pH, as demonstrated by cyclic voltammetry (CV) and hydrodynamic linear sweep voltammetry with rotating ring disk electrode (LSV-RRDE).

Oxygen Reduction Reaction Electrocatalysts Derived from Iron Salt and Benzimidazole and Aminobenzimidazole Precursors and Their Application in Microbial Fuel Cell Cathodes.

In this work, benzimidazole (BZIM) and aminobenzimidazole (ABZIM) were used as organic-rich in nitrogen precursors during the synthesis of iron-nitrogen-carbon (Fe-N-C) based catalysts by sacrificial support method (SSM) technique. The catalysts obtained, denoted Fe-ABZIM and Fe-BZIM, were characterized morphologically and chemically through SEM, TEM, and XPS. Moreover, these catalysts were initially tested in rotating ring disk electrode (RRDE) configuration, resulting in similar high electrocatalytic activity toward oxygen reduction reaction (ORR) having low hydrogen peroxide generated (<3%).

Design of Iron(II) Phthalocyanine-Derived Oxygen Reduction Electrocatalysts for High-Power-Density Microbial Fuel Cells.

Iron(II) phthalocyanine (FePc) deposited onto two different carbonaceous supports was synthesized through an unconventional pyrolysis-free method. The obtained materials were studied in the oxygen reduction reaction (ORR) in neutral media through incorporation in an air-breathing cathode structure and tested in an operating microbial fuel cell (MFC) configuration. Rotating ring disk electrode (RRDE) analysis revealed high performances of the Fe-based catalysts compared with that of activated carbon (AC).

Carbon-Supported Zirconium Oxide as a Cathode for Microbial Fuel Cell Applications.

Cost-effective electrode materials to be used as cathodes in lab-scale prototype microbial fuel cells (MFCs) were prepared from mixtures of carbon black (C) and zirconium oxide (ZrO ) of different composition. The catalytic activity of these cathodes in the oxygen reduction reaction (ORR) and their stability toward poisoning in typical MFC operative conditions were assessed by using electrochemical techniques. Scanning electron microscopy and Brunauer-Emmett-Teller measurements gave insights into sample morphology and surface area.

Vertical TiO2 Nanorods as a Medium for Stable and High-Efficiency Perovskite Solar Modules.

Perovskite solar cells employing CH3NH3PbI3-xClx active layers show power conversion efficiency (PCE) as high as 20% in single cells and 13% in large area modules. However, their operational stability has often been limited due to degradation of the CH3NH3PbI3-xClx active layer. Here, we report a perovskite solar module (PSM, best and av.

Composite polymer electrolytes for fuel cell applications: filler-induced effect on water sorption and transport properties.

Nafion- and sulfonated polysulfone (SPS)- based composite membranes were prepared by incorporation of SnO2 nanoparticles in a wide range of loading (0${ \div }$35 wt. %). The composites were investigated by differential scanning calorimetry, dynamic vapor sorption and electrochemical impedance spectroscopy to study the filler effect on water sorption, water mobility, and proton conductivity.

Using olive mill wastewater to improve performance in producing electricity from domestic wastewater by using single-chamber microbial fuel cell.

Improving electricity generation from wastewater (DW) by using olive mill wastewater (OMW) was evaluated using single-chamber microbial fuel cells (MFC). Doing so single-chambers air cathode MFCs with platinum anode were fed with domestic wastewater (DW) alone and mixed with OMW at the ratio of 14:1 (w/w). MFCs fed with DW+OMW gave 0.

High proton conduction in grain-boundary-free yttrium-doped barium zirconate films grown by pulsed laser deposition.

Reducing the operating temperature in the 500-750 °C range is needed for widespread use of solid oxide fuel cells (SOFCs). Proton-conducting oxides are gaining wide interest as electrolyte materials for this aim. We report the fabrication of BaZr(0.

Composite Nafion/sulfonated zirconia membranes: effect of the filler surface properties on proton transport characteristics.

Due to their strong acidity and water affinity, sulfated zirconia nanoparticles were evaluated as inorganic additives in the formation of composite Nafion-based membranes. Two types of sulfated zirconia were obtained according to the preparation experimental conditions. Sulfated zirconia-doped Nafion membranes were prepared by a casting procedure.