Acromioclavicular Luxation with Fracture of the Lateral End of the Clavicle: Case Report.

The present case report is an observational study with a literature review. This case is significant because the injury is rare regarding location and clinical manifestation. A middle-aged male patient sustained a fracture at the acromial end of the clavicle with lateral fragment dislocation after falling from a bicycle.

Polymer-Based Toothpastes and Their Ability in Control Tooth Extrinsic Stain.

Objectives: To synthesize experimental toothpastes (ETs) containing four different polymers (sodium linear polyphosphate [LPP]; chitosan [CHI]; sodium hexametaphosphate [HMP]; and sodium pyrophosphate [PP]) and test their ability in preventing and removing tooth extrinsic stain.

Methods: The tooth specimens were randomly assigned into six groups (n = 10): control (artificial saliva), regular toothpaste (RT-no whitening claim), ET 5% LPP, ET 0.5% CHI, ET 5% HMP, and ET 5% PP.

Optimizing Resin Infiltration Procedure in Molar Incisor Hypomineralization Lesions.

Objective: This article aims to describe a new technique for predicting the results of resin infiltration procedure in molar incisor hypomineralization lesions, named Infiltration Monitoring by Transillumination. The technique involves the use of transillumination together with ethanol application during the steps of lesion body opening and resin penetration. It provides color contrast that enhances the removal of the less porous surface layer and controls the effectiveness of resin infiltration within the lesion.

Influence of Light-Curing Time and Increment Thickness on the Properties of Bulk Fill Composite Resins With Distinct Application Systems.

The objective of this study was to evaluate the influence of light-curing time and increment thickness on the microhardness and degree of conversion (DC) of bulk fill composite resins with different application systems. Translucency parameter (TP) was also measured. Specimens of resin composites were prepared in a circular matrix using a single increment with different thicknesses (2, 4, and 6 mm) and light-cured with distinct times (10, 20, and 40 s).

Effect of combining aminomethacrylate and fluoride against erosive and abrasive challenges on enamel and dentin.

This study evaluated the effect of solutions containing aminomethacrylate copolymer (AA) and sodium fluoride (F; 225 ppm F) or fluoride plus stannous chloride (FSn; 225 ppm F, 800 ppm Sn) against enamel and dentin erosion/abrasion. Solutions F, FSn, AA, F+AA, FSn+AA, and deionized water as negative control were tested. Bovine enamel and dentin specimens (n = 13/solution/substrate) underwent a set of erosion-abrasion cycles (0.

Flowable bulk-fill versus layering restorative material on Class II restorations: A randomized clinical trial.

Objective: This study evaluated the clinical performance of Class II restorations made with flowable bulk-fill base versus conventional layering ORMOCER-based restorative material in a split-mouth randomized clinical trial.

Methods: Thirty patients received two class II restorations (n = 60) performed with different strategies. All preparations received the application of the universal self-etching adhesive system according to the manufacturer's recommendation, followed by the placement of a sectional matrix, wooden wedge, and separation ring.

Is the whitening effect of charcoal-based dentifrices related to their abrasive potential or the ability of charcoal to adsorb dyes?

Objectives: To evaluate if tooth color alteration of activated charcoal-based dentifrices may be attributed to the dye adsorption potential of charcoal (chemical action - C - slurry only) or to the association of dye adsorption with abrasion (chemo-mechanical action - CM- slurry/toothbrushing). Potential adverse effects in surface roughness, gloss, and wear were also assessed.

Methods: Bovine enamel/dentin specimens were randomly allocated into the groups according to treatments and test model (n = 15): deionized water (negative control- NC); Colgate Maximum Anticaries Protection (conventional toothpaste- positive control- PC); Colgate Luminous White Activated Charcoal (LW); Oral-B 3D White Therapy Charcoal (WT); Curaprox Black is White (BW); Dermavita Whitemax (Activated charcoal powder- WP).

Titanium abutment background masking using highly opaque cements for implant prosthetics.

Purpose: To evaluate the capacity of highly opaque cements on masking titanium abutment background.

Methods: Dentin and titanium specimens were used to simulate respectively, a natural dental background and an implant abutment. To simulate the full-crowns, Y-TZP zirconia (ZC), lithium disilicate (LD), and resin composite (RC) blocks were used.

Film-Forming Polymers for Inhibition of Hydroxyapatite Dissolution: A Screening Study.

The aim of this study was to evaluate the effect of film-forming polymer solutions of different concentrations and pH values, either associated or not with sodium fluoride (F; 225 ppm F-), when applied during the initial stage of salivary pellicle formation, to prevent the dissolution of hydroxyapatite (HA), which was determined by the pH-stat method. Polyacrylic acid (PA), chitosan, sodium linear polyphosphate (LPP), polyvinyl methyl ether/maleic anhydride (PVM/MA), and propylene glycol alginate (PGA) were tested in three concentrations (lower, medium, and higher), two pH values (native or adjusted), and either associated or not with F. Distilled water, F, and stannous ion+fluoride (Sn/F; 225 ppm F- and 800 ppm Sn2+, as SnCl2) solutions were the controls, totalizing 63 groups.

Esthetical Properties of Single-Shade and Multishade Composites in Posterior Teeth.

This study aimed to compare the aesthetic properties of posterior composite restorations made with a multishade (MS) or single-shade (SS) material. For that, 23 extracted human molars were used. The shade determination was performed, and the occlusal anatomy was registered by a custom-made stamp.

Optical properties of esthetic temporary cements and final restoration color.

Background: Opaque cements can be esthetically unfavorable and alternative translucent materials have been developed. The aim of this study was to evaluate the color interference of a new translucent cement compared with conventional materials, in association with interim restoration with different thickness and shades.

Methods: Bis-acryl composite disks were prepared in 2 thicknesses (1.

Tooth color change promoted by different whitening toothpastes under alternate cycles of staining and brushing.

Objectives: To compare the effect of whitening toothpastes with different mechanisms of action on discolored teeth subjected to additional staining/or not.

Methods: One hundred twenty tooth specimens were stained for 14 days (staining broth under constant agitation and pH=7) and then allocated into the groups of toothpastes with different whitening ingredients (n=10): 1. Regular - Colgate Total 12 Clean Mint; 2.

Efficacy of Bracket Adhesive Remnant Removal by a Fluorescence-Aided Identification Technique with a UV Light Handpiece: Study.

Objective: This study aims to analyze the fluorescence-aided identification technique efficacy on adhesive remnant removal from the enamel surface after orthodontic bracket debonding.

Materials And Methods: Forty-five extracted human upper central incisors were divided into 3 groups ( = 15) according to the kind of adhesive for bracket bonding and the use or absence of near UV light for remnant removal: BF/UV- fluorescent adhesive/UV light, BF/0-fluorescent adhesive/no UV light, and TB/0-nonfluorescent adhesive/no UV light. For all teeth, 100% of the adhesive used remained on the enamel surface after debonding.

Film-Forming Polymers for Tooth Erosion Prevention.

Different agents have been proposed to prevent the progression of acid induced dental substance losses, which are called erosive tooth wear (ETW), such as fluorides, calcium, and phosphate-based products; however, there is a need for a further increase in efficacy. Recently, the ability of polymers to interact with the tooth surface, forming acid resistant films, has come into the focus of research; nevertheless, there is still the need for a better understanding of their mode of action. Thus, this article provides an overview of the chemical structure of polymers, their mode of action, as well as the effect of their incorporation into oral care products, acid beverages, and antacid formulations, targeting the prevention of ETW.

Chemical behavior of 20%-22% carbamide peroxide gels in at-home bleaching: Randomized crossover in situ trial.

Objective: To evaluate if distinct 20%-22% carbamide peroxide bleaching gels present similar decomposition pattern and pH during the clinical use in both arches, as well as gels viscosity.

Methods: Participants randomly received treatments with carbamide peroxide gels (n = 10): OPF (OpalescencePF-20%); PNT (Polanight-22%); and WPC (Whiteness Perfect-22%) in three different days, with 2-day washout. Decomposition pattern was assessed by peroxide concentration.

[Not Available].

This study synthesized and tested experimental gels containing fluoride (F-) and stannous (Sn2+) ions for the control of dental erosion. Enamel and dentin polished specimens were eroded (1% citric acid solution, 10 min) and randomly allocated into 5 groups (n=10): Placebo - Hydroxypropyl Methylcellulose (HMC) gel; F+Sn+HMC - 7,500 ppm F- / 15,000 ppm Sn2+; F+HMC - 7,500 ppm F-; Commercial acidulated phosphate fluoride gel (12,300 ppm F-); and Control - no treatment. After treatment (applied for 60 s), specimens underwent an erosion-remineralization cycling (5 min in 0.

Pellicle modification with natural bioproducts: Influence on tooth color under erosive conditions.

Salivary pellicle was modified with bioproducts and we assessed the change in tooth color and the protection of enamel to erosion. Human enamel specimens were assigned to one of three solutions: grape seed extract or black tea (bioproducts), or deionized water (negative control); after which one half the specimens underwent erosive challenges. The specimens underwent 15 cycles involving salivary pellicle formation (10 min, 37°C), incubation in solution (2 min, 25°C), subsequent pellicle formation (90 min, 37°C).

S-PRG-based toothpastes compared to NaF toothpaste and NaF varnish on dentin permeability in vitro.

Objectives: To analyze the effect of 5 toothpastes containing different percentages of S-PRG fillers compared to NaF toothpaste and NaF varnish on the dentin hydraulic conductance (Lp).

Methodology: Dentin disks (1.0±0.

Viscosity modulation of resin composites versus hand application on internal adaptation of restorations.

Objective: To compare the effect of the injection of viscosity modulated resin composites versus hand application without modulation, on the internal adaptation of different material to the gingival wall of class II preparations.

Materials And Methods: Class II cavities were created on mesial and distal surfaces of 60 extracted human molars, resulting on 120 tooth preparations (n = 120). The preparations were restored with four resin composites: VIS-VisCalor (Voco); GRA-GrandioSO (Voco); FIL-Filtek One Bulk Fill (3 M/ESPE); and SON-SonicFill (Kerr).

Efficacy of S-PRG filler varnishes on enamel caries remineralization.

Objectives: To evaluate the remineralizing effect of varnishes containing different concentrations of S-PRG filler or sodium fluoride on enamel caries lesions.

Methods: Enamel specimens were obtained from bovine incisors, flattened and polished. Half of the surface was protected, and artificial caries lesion was created in the unprotected area.

S-PRG-based composites erosive wear resistance and the effect on surrounding enamel.

This study evaluated Surface Pre-Reacted Glass-ionomer (S-PRG)-based-composites' surface resistance against erosive wear and their protective effect on surrounding enamel. Bovine enamel was randomized into 12 groups (n = 10/group) [erosion (e) or erosion + abrasion (a)]: nanohybrid-S-PRG-based composite (SPRGe/SPRGa), nanohybrid-S-PRG-based bulk-fill (SPRGBFe/SPRGBFa), nanoparticle-composite (RCe/RCa), nanohybrid-bulk-fill (BFe/BFa), Glass Hybrid Restorative System (GHRSe/GHRSa), and resin-modified glass-ionomer-cement (RMGICe/RMGICa). Cavities were prepared and restored.

Protection of calcium silicate/sodium phosphate/fluoride toothpaste with serum on enamel and dentin erosive wear.

Objective: To evaluate the effect of a toothpaste containing calcium silicate/sodium phosphate/fluoride associated or not to the boost serum (BS) against erosive tooth wear (ETW) on enamel and dentin.

Methodology: Bovine enamel and dentin specimens were subjected to an erosion-abrasion cycling model (1% citric acid - pH 3.6 -2 min / artificial saliva - 60 min, 4×/day, 5 days).

One-year follow-up comparing at-home bleaching systems outcomes and the impact on patient's satisfaction: Randomized clinical trial.

Objective: To compare at-home systems with reduced daily time of use (10% hydrogen peroxide [HP] gel with prefilled (PT) or customized trays (CT), and 10% carbamide peroxide [CP] gel), with the conventional nightguard vital bleaching (10% CP). Bleaching efficacy, adverse effects, and patient's satisfaction were evaluated.

Methods: Sixty participants were randomly divided into treatments (14 days): Opalescence GO (OGO)-10%HP PT-30 min, White Class-10%HP CT-30 min, Opalescence PF-10%CP CT-2 h, and Opalescence PF-10%CP CT-8 h.

The effects of polishing techniques on surface roughness and gloss of different composites.

The aim of this study was to evaluate the effects of different polishing techniques on the surface roughness and gloss of various composites. A total of 360 composite cylinders (6 mm in diameter and 2 mm in thickness) were made using a silicone matrix and 1 of the following 6 restorative materials (n = 60): Admira Fusion, GrandioSO, Filtek Supreme, Filtek Z250, TPH Spectra ST, and Herculite Classic. The composite specimens were cured and then immersed in water for 24 hours.

Influence of Bleaching Gel Peroxide Concentration on Color and Penetration through the Tooth Structure.

Aim And Objective: The purpose of this study was to assess the effect of hydrogen peroxide concentration on the bleaching efficacy and penetration through the tooth structure.

Materials And Methods: One hundred enamel/dentin specimens with cylindrical shape were obtained from bovine incisors. The surfaces were polished and the size standardized.