Amperometric detection in the presence of carbon nanotubes dispersed in background electrolyte: Evaluating its suitability for capillary electrokinetic chromatography separations of polyphenolic compounds.

This work reports on the positive effects observed upon both the separation and analytical signals in electrophoretic separations of selected phenolic compounds when using aqueous BGE containing carbon nanotubes (CNTs) in connection to electrochemical detection (ECD). The influence of the presence of surfactant-coated CNTs in the BGE upon the amperometric response of probe compounds was evaluated under hydrodynamic regime in capillary flow injection experiments as well as electrophoretic separations. Among the surfactants employed to disperse CNTs within BGE, SDS shows the best results in terms of dispersion stability and degree of dispersion of the CNTs.

Classification of Spanish white wines using their electrophoretic profiles obtained by capillary zone electrophoresis with amperometric detection.

A method was developed for the simultaneous detection of eight polyphenols (t-resveratrol, (+)-catechin, quercetin and p-coumaric, caffeic, sinapic, ferulic, and gallic acids) by CZE with electrochemical detection. Separation of these polyphenols was achieved within 25 min using a 200 mM borate buffer (pH 9.4) containing 10% methanol as separation electrolyte.

Analysis of total polyphenols in wines by FIA with highly stable amperometric detection using carbon nanotube-modified electrodes.

The use of glassy carbon electrodes (GCEs) modified with multi-walled carbon nanotube (CNT) films for the continuous monitoring of polyphenols in flow systems has been examined. The performance of these modified electrodes was evaluated and compared to bare GCE by cyclic voltammetry experiments and by flow injection analysis (FIA) with amperometric detection monitoring the response of gallic, caffeic, ferulic and p-coumaric acids in 0.050 M acetate buffer pH 4.

Analysis of polyphenols in white wine by CZE with amperometric detection using carbon nanotube-modified electrodes.

A method for the simultaneous detection of five polyphenols (caffeic, chlorogenic, ferulic and gallic acids and (+)-catechin) by CZE with electrochemical detection was developed. Separation of these polyphenols was performed in a 100 mM borate buffer (pH 9.2) within 15 min.

CZE separation of amitrol and triazine herbicides in environmental water samples with acid-assisted on-column preconcentration.

A simple analytical scheme for the detection and quantification of amitrol and triazine herbicides (atrazine, ametryn and atraton) and degradation product (2-hydroxyatrazine) in environmental water samples by CZE is reported. On-column preconcentration of analytes from untreated water samples (mineral, spring, tap and river water) is accomplished by introducing an acid plug (200 mM citrate of pH 2.0) after the sample and then proceeding with the CZE separation, using 100 mM formiate buffer of pH 3.

Selective detection of dopamine in the presence of ascorbic acid using carbon nanotube modified screen-printed electrodes.

This work reports on the performance of carbon nanotube modified screen-printed electrodes (SPE-MWCNT) for the selective determination of dopamine (DA) in the presence of ascorbic acid (AA) by adsorptive stripping voltammetry (AdSV). Several operating conditions and parameters were examined including the electrochemical pre-treatment and the previous AA interaction and DA accumulation in the presence AA at physiological conditions. Under the chosen conditions, DA peak current of differential pulse voltammograms increases linearly with DA concentration in the range of 5.

Design and adaptation of miniaturized electrochemical devices integrating carbon nanotube-based sensors to commercial CE equipment.

The design of new electrochemical devices integrating carbon nanotube sensors and their adaptation to commercial CE equipments are described. One of these designs was made for using commercial screen-printed electrodes, whereas the second was projected for coupling commercial glassy carbon electrodes. The electrochemical characterization of these devices revealed that their hydrodynamic behaviour is strongly influenced by the electrode modification with multi-wall carbon nanotubes that provided faster and/or more sensitive signals.

Screening and confirmatory methods for the analysis of macrocyclic lactone mycotoxins by CE with amperometric detection.

A simple analytical scheme for the screening and quantification of zearalenone and its metabolites, alpha-zearalenol and beta-zearalenol, is reported. Extracts from maize flour samples were collected by supercritical fluid extraction and afterwards, they were analyzed by CE with amperometric detection. This scheme allowed a rapid and reliable identification of contaminated flour samples according to the reference value established for zearalenone by directive 2005/38/EC (200 microg/kg).

Comparative study of multi walled carbon nanotubes-based electrodes in micellar media and their application to micellar electrokinetic capillary chromatography.

This work reports on a comparative study of the electrochemical performance of carbon nanotubes-based electrodes in micellar media and their application for amperometric detection in micellar electrokinetic capillary chromatography (MEKC) separations. These electrodes were prepared in two different ways: immobilization of a layer of carbon nanotubes dispersed in polyethylenimine (PEI), ethanol or Nafion onto glassy carbon electrodes or preparation of paste electrodes using mineral oil as binder. Scanning electron microscopy (SEM) was employed for surface morphology characterization while cyclic voltammetry of background electrolyte was used for capacitance estimation.

Analytical applications of a carbon nanotubes composite modified with copper microparticles as detector in flow systems.

In this work we report on the successful use of a composite prepared by dispersion of multi-wall carbon nanotubes (1-5 microm length, 20-50 nm diameter) and copper microparticles within mineral oil as detector for amino acids quantification in flow injection analysis and capillary electrophoresis. The resulting electrode displays a highly sensitive amperometric detection of amino acids, based on the copper dissolution facilitated by the strong activity of amino acids as ligands of Cu(II). The sensor makes possible the detection of amino acids, electroactive or not, at very low potentials (0.

Analytical applications of glassy carbon electrodes modified with multi-wall carbon nanotubes dispersed in polyethylenimine as detectors in flow systems.

This work reports the advantages of using glassy carbon electrodes (GCEs) modified with multi-wall carbon nanotubes (CNT) dispersed in polyethylenimine (PEI) as detectors in flow injection and capillary electrophoresis. The presence of the dispersion of CNT in PEI at the electrode surface allows the highly sensitive and reproducible determination of hydrogen peroxide, different neurotransmitters (dopamine (D) and its metabolite dopac, epinephrine (E), norepinephrine (NE)), phenolic compounds (phenol (P), 3-chlorophenol (3-CP) and 2,3-dichlorophenol (2,3CP)) and herbicides (amitrol). Sensitivities enhancements of 150 and 140 folds compared to GCE were observed for hydrogen peroxide and amitrol, respectively.

Application of matrix solid-phase dispersion to the propham and maleic hydrazide determination in potatoes by differential pulse voltammetry and HPLC.

The application of the matrix solid-phase dispersion (MSPD) process as sample treatment in connection with the electrochemical detection is studied for the first time. For this purpose, a novel methodology is introduced for the extraction of propham and maleic hydrazide herbicides from potatoes samples based in the MSPD process prior to their electrochemical detection. Potato samples disruption was done by blending them with C(8) bonded-phase and selective herbicide extraction was achieved by successive treatment of the blended with 50mM phosphate buffer pH 7.

Biocatalytically induced formation of cupric ferrocyanide nanoparticles and their application for electrochemical and optical biosensing of glucose.

The enzymatically controlled growth of cupric ferrocyanide nanoparticles in the presence of glucose oxidase, its ferricyanide electron acceptor, and copper ions is described. The biocatalytically stimulated growth of these nanoparticles on the surface of carbon-paste electrodes results in an amplified electrochemical detection of the glucose substrate. This concept can readily be expanded for monitoring a wide range of biocatalytic processes involving the ferricyanide electron acceptor.

Nanoparticle-based assays of antioxidant activity.

The antioxidant power of several phenolic acids and related food samples is estimated from the generation and growth of gold nanoparticles. The intensity of the resulting particle plasmon absorption bands correlates well with the redox characteristics of these phenolic acids estimated from cyclic voltammetry experiments. The highest capacity of reducing gold(III) to gold nanoparticles corresponds to the highest antioxidant activity, consistent with the tendency of phenolic acids to donate electrons.