Development of a Multifunctional Chitosan-Based Composite Film from Crab Shell () and Algae () with Enhanced Antioxidant and Antimicrobial Properties for Active Food Packaging.

Eco-friendly, bioactive and edible films from renewable resources are increasingly regarded as viable replacements for petroleum-based packaging. This study investigates the application of macroalgae powder (ULP) as an active additive in crab () chitosan-based films for natural food packaging. Films with ULP concentrations of 0.

Mechanical Stimulation and Aligned Poly(ε-caprolactone)-Gelatin Electrospun Scaffolds Promote Skeletal Muscle Regeneration.

The current treatments to restore skeletal muscle defects present several injuries. The creation of scaffolds and implant that allow the regeneration of this tissue is a solution that is reaching the researchers' interest. To achieve this, electrospinning is a useful technique to manufacture scaffolds with nanofibers with different orientation.

Sustainable synthesis of ZnO and FeO nanoparticles and their nanocomposite ZnFeO: Comprehensive characterization and applications in antioxidant activity and antibiotics degradation efficiency.

This study focuses on developing and evaluating eco-friendly nanoparticles, specifically FeO NPs, ZnO NPs, and a ZnFeO nanocomposite (NC), for potential applications in environmental remediation and biomedicine. The nanoparticles were synthesized and characterized using X-ray diffraction (XRD), which revealed their crystalline structures with sizes of 20.3 nm for FeO NPs, 22.

Integrating Augmented Reality in Spine Surgery: Redefining Precision with New Technologies.

Introduction: The integration of augmented reality (AR) in spine surgery marks a significant advancement, enhancing surgical precision and patient outcomes. AR provides immersive, three-dimensional visualizations of anatomical structures, facilitating meticulous planning and execution of spine surgeries. This technology not only improves spatial understanding and real-time navigation during procedures but also aims to reduce surgical invasiveness and operative times.

Chitosan-Type-A-Gelatin Hydrogels Used as Potential Platforms in Tissue Engineering for Drug Delivery.

Hydrogels are materials made of crosslinked 3D networks of hydrophilic polymer chains that can absorb and retain significant amounts of water due to their hydrophilic structure without being dissolved. In relation to alternative biomaterials, hydrogels offer increased biocompatibility and biodegradability, giving them distinct advantages. Thus, hydrogel platforms are considered to have the potential for the development of biomedical applications.

Novel Food and Beverages: Production and Characterization.

In today's market, the pursuit of product optimization is not just a trend but a necessity while facing the challenges of supplying a wider range of products, sustainability pressures, and the requirement for continuous innovation [...

Comparative Effect of Antioxidant and Antibacterial Potential of Zinc Oxide Nanoparticles from Aqueous Extract of through Different Precursor Concentrations.

Antibiotic resistance is a global health crisis caused by the overuse and misuse of antibiotics. Accordingly, bacteria have developed mechanisms to resist antibiotics. This crisis endangers public health systems and medical procedures, underscoring the urgent need for novel antimicrobial agents.

Characterization of emulgels formulated with phycocyanin and diutan gum as a novel approach for biocompatible delivery systems.

Phycocyanin (PC), a protein derived from algae, is non-toxic and biocompatible. Due to its environmental and sustainable properties, it has been studied as an alternative stabilizer for food emulsions. In this sense, the main objective of this work is to evaluate the effectiveness of PC and its use in combination with diutan gum (DG), a biological macromolecule, to prepare emulgels formulated with avocado oil.

Bictegravir/emtricitabine/tenofovir alafenamide as first-line treatment in naïve HIV patients in a rapid-initiation model of care: BIC-NOW clinical trial.

Objective: Multiple strategies have been utilised to reduce the incidence of HIV, including PrEP and rapid antiretroviral therapy initiation. The study objectives were to evaluate the efficacy, safety, satisfaction, treatment adherence, and system retention obtained with rapid initiation of bictegravir/emtricitabine/tenofovir alafenamide (BIC/FTC/TAF) in naïve patients.

Methods: This phase IV, multicenter, open-label, single-arm, 48-week clinical trial enrolled patients between January 2020 and June 2022.

Effect of different crosslinking agents on hybrid chitosan/collagen hydrogels for potential tissue engineering applications.

Tissue engineering (TE) demands scaffolds that have the necessary resistance to withstand the mechanical stresses once implanted in our body, as well as excellent biocompatibility. Hydrogels are postulated as interesting materials for this purpose, especially those made from biopolymers. In this study, the microstructure and rheological performance, as well as functional and biological properties of chitosan and collagen hydrogels (CH/CG) crosslinked with different coupling agents, both natural such as d-Fructose (F), genipin (G) and transglutaminase (T) and synthetic, using a combination of 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide hydrochloride with N-hydroxysuccinimide (EDC/NHS) will be assessed.

Agro-Waste Sweet Pepper Extract-Magnetic Iron Oxide Nanoparticles for Antioxidant Enrichment and Sustainable Nanopackaging.

This study synthesizes magnetic iron oxide nanoparticles from agro-waste sweet pepper extract, exploring their potential as antioxidant additives and in food preservation. Iron (III) chloride hexahydrate is the precursor, with sweet pepper extract as both a reducing and capping agent at pH 7.5.

Characterization of Gelatin-Polycaprolactone Membranes by Electrospinning.

New advances in materials science and medicine have enabled the development of new and increasingly sophisticated biomaterials. One of the most widely used biopolymers is polycaprolactone (PCL) because it has properties suitable for biomedical applications, tissue engineering scaffolds, or drug delivery systems. However, PCL scaffolds do not have adequate bioactivity, and therefore, alternatives have been studied, such as mixing PCL with bioactive polymers such as gelatin, to promote cell growth.

Injectable Thermoresponsive Microparticle/Hydrogel System with Superparamagnetic Nanoparticles for Drug Release and Magnetic Hyperthermia Applications.

Cancer is a disease that continues to greatly impact our society. Developing new and more personalized treatment options is crucial to decreasing the cancer burden. In this study, we combined magnetic polysaccharide microparticles with a Pluronic thermoresponsive hydrogel to develop a multifunctional, injectable drug delivery system (DDS) for magnetic hyperthermia applications.

Evaluation of rice bran varieties and heat treatment for the development of protein/starch-based bioplastics via injection molding.

Improper management of disposable plastics and resource depletion pose significant environmental challenges, prompting interest in alternatives like bioplastics. These novel materials can be produced from by-products of the agro-food industry, offering solutions and valorizing waste. Rice bran, a substantial by-product of rice processing, is abundant and cost-effective, rich in proteins and starch.

Sustainable Nanomagnetism: Investigating the Influence of Green Synthesis and pH on Iron Oxide Nanoparticles for Enhanced Biomedical Applications.

This study comprehensively analyzed green nanomagnetic iron oxide particles (GNMIOPs) synthesized using a green method, investigating their size, shape, crystallinity, aggregation, phase portions, stability, and magnetism. The influence of pH and washing solvents on the magnetic properties of the nanoparticles and their incorporation into PCL membranes was examined for biomedical applications. Polyphenols were utilized at different pH values (1.

Quantifying the Structure and Properties of Nanomagnetic Iron Oxide Particles for Enhanced Functionality through Chemical Synthesis.

This comprehensive study investigates the properties of chemical nanomagnetic iron oxide particles (CNMIOPs) synthesized through a chemical method. The primary objective is to examine how pH levels and washing solvents affect the magnetism properties of these nanoparticles. Three different pH levels (1.

Valorization of Honduran Agro-Food Waste to Produce Bioplastics.

The development of biodegradable plastics and eco-friendly biomaterials derived from renewable resources is crucial for reducing environmental damage. Agro-industrial waste and rejected food can be polymerized into bioplastics, offering a sustainable solution. Bioplastics find use in various industries, including for food, cosmetics, and the biomedical sector.

Stabilization and Valorization of Beer Bagasse to Obtain Bioplastics.

Beer bagasse is a residue produced in large quantities, though it is undervalued in the industry. Its high protein and polysaccharide content make it attractive for use in sectors such as the manufacture of bioplastics. However, its high water content makes it necessary to stabilize it before being considered as a raw material.

Expression profile of microRNAs related with viral infectivity, inflammatory response, and immune activation in people living with HIV.

Objective: To evaluate the serum expression of microRNAs (miRNAs) with ability to modulate the human immunodeficiency (HIV) replication or inflammatory status in people living with HIV (PLWH).

Methods: Forty healthy controls and two groups of PLWH were evaluated: (a) Group 1 ( = 30), patients with detectable viral load at inclusion, analyzed before receiving antiretroviral therapy (ART) and 12 months after initiating it; (b) Group 2 ( = 55), PLWH with prolonged undetectable viral load. Intestinal barrier disruption (I-FABP) and bacterial translocation (16S rDNA) markers, inflammatory markers such as interleukin (IL)-6 and sCD163, immune activation and expression of specific miRNAs were evaluated.

Effect of Calcination Temperature and Time on the Synthesis of Iron Oxide Nanoparticles: Green vs. Chemical Method.

Nowadays, antioxidants and antibacterial activity play an increasingly vital role in biosystems due to the biochemical and biological reactions that involve free radicals and pathogen growth, which occur in many systems. For this purpose, continuous efforts are being made to minimize these reactions, including the use of nanomaterials as antioxidants and bactericidal agents. Despite such advances, iron oxide nanoparticles still lack knowledge regarding their antioxidant and bactericidal capacities.

Type-A Gelatin-Based Hydrogel Infiltration and Degradation in Titanium Foams as a Potential Method for Localised Drug Delivery.

A gelatin-based hydrogel was infiltrated and degraded-released in two different titanium foams with porosities of 30 and 60 vol.% (Ti30 and Ti60 foams) and fabricated by the space holder technique to evaluate its potential to act as an innovative, alternative, and localised method to introduce both active pharmaceutical ingredients, such as antibiotics and non-steroidal anti-inflammatory drugs, and growth factors, such as morphogens, required after bone-tissue replacement surgeries. In addition, the kinetic behaviour was studied for both infiltration and degradation-release processes.

Marine Collagen-Based Antibacterial Film Reinforced with Graphene and Iron Oxide Nanoparticles.

It has become more widely available to use biopolymer-based films as alternatives to conventional plastic-based films due to their non-toxic properties, flexibility, and affordability. However, they are limited in application due to deficiencies in their properties. The marine collagen was the specimen for the present study.

Biopolymer-Based Films Reinforced with Green Synthesized Zinc Oxide Nanoparticles.

Nowadays, biopolymer-based films are being developed as an alternative to conventional plastic-based films, mainly because they are non-toxic, flexible, inexpensive, and widely available. However, they are restricted in their applications due to several deficiencies in their properties. Accordingly, the reinforcement of these materials with nanoparticles/nanofillers could overcome some of their shortcomings, especially those processed by green methods.