Tuning the properties of peptide imprinted nanoparticles for protein immunoprecipitation using magnetic streptavidin beads.

Maximizing the binding properties of thermoresponsive molecularly imprinted nanoparticles (MIN) was aimed to explore their feasibility as antibody substitutes in protein immunoprecipitation (IPP) with magnetic streptavidin beads (MSB). Thermoresponsive MIN targeting the cannabinoid CB receptor were produced by epitope imprinting through solid-phase synthesis. It was intended to determine how different variables influenced physicochemical features, binding behaviour and immunoprecipitation of the target recombinant glutathione S-transferase tagged fusion protein (GST-CTer).

Revealing novel biomarkers for diagnosing chronic kidney disease in pediatric patients.

Pediatric chronic kidney disease (CKD) is a clinical condition characterized by progressive renal function deterioration. CKD diagnosis is based on glomerular filtration rate, but its reliability is limited, especially at the early stages. New potential biomarkers (citrulline (CIT), symmetric dimethylarginine (SDMA), S-adenosylmethionine (SAM), n-butyrylcarnitine (nC4), cis-4-decenoylcarnitine, sphingosine-1-phosphate and bilirubin) in addition to creatinine (CNN) have been proposed for early diagnosis.

Design and validation of recombinant protein standards for quantitative Western blot analysis of cannabinoid CB receptor density in cell membranes: an alternative to radioligand binding methods.

Background: Replacement of radioligand binding assays with antibody-antigen interaction-based approaches for quantitative analysis of G protein-coupled receptor (GPCR) levels requires the use of purified protein standards containing the antigen. GPCRs in general and cannabinoid CB receptor in particular show a progressive tendency to aggregate and precipitate in aqueous solution outside of their biological context due to the low solubility that the hydrophobic nature imprinted by their seven transmembrane domains. This renders full-length recombinant GPCRs useless for analytical purposes, a problem that can be overcome by engineering soluble recombinant fragments of the receptor containing the antigen.

SPARC-mediated long-term retention of nab-paclitaxel in pediatric sarcomas.

Secreted protein acidic and rich in cysteine (SPARC) is a matricellular glycoprotein overexpressed by several cancers. Because SPARC shows high binding affinity to albumin, we reasoned that pediatric sarcoma xenografts expressing SPARC would show enhanced uptake and accumulation of nanoparticle albumin-bound (nab)-paclitaxel, a potent anticancer drug formulation. We first evaluated the expression of SPARC in patient-derived xenografts (PDXs) of Ewing sarcoma, rhabdomyosarcoma and osteosarcoma, finding variable SPARC gene expression that correlated well with SPARC protein measured by immunoblotting.

Solid-phase synthesis of imprinted nanoparticles as artificial antibodies against the C-terminus of the cannabinoid CB1 receptor: exploring a viable alternative for bioanalysis.

The production of artificial anti-CB1 antibodies in nanoparticle format is described using the solid-phase imprinting approach. Instead of whole protein imprinting, a linear C-terminus sequence of the receptor comprising 15 amino acids (458-KVTMSVSTDTSAEAL-472) has been used as template, in accordance with the epitope imprinting approach. This sequence is located intracellularly, and it is involved in coupling to G proteins, being responsible for CB1 receptor desensitisation and internalisation.

Particle Analysis for the Detection of Gunshot Residue (GSR) in Nasal Samples Using Scanning Laser Ablation and Inductively Coupled Plasma-Mass Spectrometry (SLA-ICPMS).

Currently, aluminum stub with carbon adhesive devices are used to collect inorganic gunshot residues (GSR) from the hands of a shooter. In an ideal shooting case, the gunshot particles do not persist for more than 2 h in the hands of the shooter, provided that the hands have not been washed. However, for forensic analysis and inference, the extended persistence of GSR would be desirable.

Fungicide distribution in vitiviniculture ecosystems according to different application strategies to reduce environmental impact.

Systematic fungicides treatments in vine-growing European ecosystems have been conducted for decades. The goal of this study was to determine the mobility and persistence of 20 fungicides used in two viticultural zones in Atlantic and Mediterranean climates, from the moment of their application until their distribution throughout different compartments of the ecosystem: soil, water, grapes, musts and wines. This study also sought to obtain valuable information to reduce the usage of these products without affecting the health of the vines.

Molecularly imprinted nanoparticles grafted to porous silica as chiral selectors in liquid chromatography.

The work presented here explores the grafting of molecularly imprinted nanoparticles (MIN) on silica beads for the development of new chiral stationary phases (CSP). Both solid-phase imprinting and precipitation polymerisation were tested for MIN synthesis though the latter approach was the only one that provided efficient chiral selectors. MIN particles were prepared by iniferter polymerisation initiated by UV radiation, using itaconic acid as functional monomer and ethylene dimethacrylate as cross-linker.

Determination of mercury(ii) in water at sub-nanomolar levels by laser ablation-ICPMS analysis of screen printed electrodes used as a portable voltammetric preconcentration system.

Environmental pollution by mercury in ambient water samples is a recognized problem worldwide. Sample preservation and transport to the laboratory lead to uncertain analytical results. This study outlines the development of a procedure for on-site electrodeposition of mercury from water samples on a screen-printed gold electrode (SPGE) using portable voltammetric techniques.

Water compatible stir-bar devices imprinted with underivatised glyphosate for selective sample clean-up.

This paper reports the development of stir bars with a new MIP based coating, for the selective sorptive extraction of the herbicide glyphosate (GLYP). Molecular imprinting of the polymer has directly been carried out employing underivatised GLYP as the template molecule. Due to the poor solubility of the target compound in organic solvents, the MIP methodology has been optimised for rebinding in aqueous media, being the synthesis and the rebinding steps carried out in water:methanol mixtures and pure aqueous media.

A novel strategy for Cr(III) and Cr(VI) analysis in dietary supplements by speciated isotope dilution mass spectrometry.

In recent years, Cr speciation in dietary supplements has become decisive in the evaluation of their health risks. Despite being an beneficial micronutrient, Cr(III) can be toxic at living organisms at high concentrations, while Cr(VI) is known to be highly toxic and carcinogenic. The main objective of this work was to optimize an analytical methodology for the extraction and accurate quantification of Cr(III) and Cr(VI) in dietary supplements.

Molecularly imprinted polymers as a tool for the study of the 4-ethylphenol metabolic pathway in red wines.

A molecularly imprinted polymer (MIP) based methodology is described here for the determination of compounds that belong to the 4-ethylphenol (4EP) metabolic pathway in red wines. To this end, two MIP materials have been developed: a 4EP MIP as a class-selective material to extract phenols that belong to the 4EP metabolic pathway and a coumaric acid (CA) imprinted polymer as a MIP-based stationary phase capable of selectively separating these phenols on HPLC analysis, obtaining clean chromatograms. 4-vinyl pyridine and ethylene glycol dimethacrylate were respectively used as functional monomer and cross-linker for both MIPs.

Iniferter-mediated grafting of molecularly imprinted polymers on porous silica beads for the enantiomeric resolution of drugs.

A surface-imprinted chiral stationary phase for the enantiomeric resolution of the antidepressant drug, citalopram, is presented in this work. N, N'-diethylaminodithiocarbamoylpropyl(trimethoxy)silane has been used as silane iniferter for the surface functionalization of the solid silica support. A molecularly imprinted polymer thin film, in the nm scale, was then grafted on the silanized silica using itaconic acid as the functional monomer and ethylene glycol dimethacrylate as the cross-linker in the presence of the template S-citalopram.

Direct potentiometric quantification of histamine using solid-phase imprinted nanoparticles as recognition elements.

A new potentiometric sensor based on molecularly imprinted nanoparticles produced via the solid-phase imprinting method was developed. For histamine quantification, the nanoparticles were incorporated within a membrane, which was then used to fabricate an ion-selective electrode. The use of nanoparticles with high affinity and specificity allowed for label-free detection/quantification of histamine in real samples with short response times.

Enantioselective extraction of (+)-(S)-citalopram and its main metabolites using a tailor-made stir bar chiral imprinted polymer for their LC-ESI-MS/MS quantitation in urine samples.

This paper reports the application of a chiral imprinted polymer (CIP)-coated stir bar for the selective extraction of (+)-(S)-citalopram (SCIT) and its main metabolites, (+)-(S)-desmethylcitalopram (SDCIT) and (+)-(S)-didesmethylcitalopram (SDDCIT), from urine samples. The developed device has been demonstrated to be capable of selectively extracting the three target analytes from urine samples without saturating the imprinted sites. A CIP-coated stir bar sorptive extraction procedure (CIP-SBSE) is proposed for the isolation of SCIT, SDCIT and SDDCIT followed by their subsequent analysis using liquid chromatography ion trap mass spectrometry (LC-ITMS).

Conductance based sensing and analysis of soluble phosphates in wastewater.

The current standard method used for measuring soluble phosphate in environmental water samples is based on a colourimetric approach, developed in the early 1960s. In order to provide an alternative, label free sensing solution, a molecularly imprinted polymer (MIP) was designed to function as a phosphate receptor. A combination of functional monomer (N-allylthiourea), cross-linker and monomer/template ratios were optimised in order to maximise the binding capacity for phosphate.

Rational design and chromatographic evaluation of histamine imprinted polymers optimised for solid-phase extraction of wine samples.

This article reports on the computational design, development and application of a molecularly imprinted polymer (MIP) with specific affinity towards histamine. Computational modelling was used to screen a monomer library in order to select the monomers able to form the strongest complex with the target analyte. These were subsequently used for MIP synthesis by radical polymerisation initiated by UV.

Characterisation of the flavour profile from Graciano Vitis vinifera wine variety by a novel dual stir bar sorptive extraction methodology coupled to thermal desorption and gas chromatography-mass spectrometry.

The aim of this work was to develop a new analytical technique for the study of the organoleptic compounds (flavour profile) of the Graciano Vitis vinifera wine variety. The cv. Graciano is a singular variety of red grapes with its origins in La Rioja and Navarra (northern Spain).

Validation of an LC-ESI-MS/MS method for the quantitation of phosphodiesterase-5 inhibitors and their main metabolites in rat serum and brain tissue samples.

This work proposes a liquid chromatography-electrospray ionization ion trap mass spectrometry (LC-ESI-ITMS) method, for the quantification of sildenafil (SDF), tadalafil (TDF) and vardenafil (VDF) and their metabolites N-desmethylSDF, O-desethylSDF and N-desethylVDF, preceded by a sample preparation step based on protein and phospholipid elimination. A C8 column (150 mm × 4.6 mm, 5 μm) with ammonium formate (20mM) and acetonitrile as the mobile phase components have been used.

Screening and quantification of antipsychotic drugs in human brain tissue by liquid chromatography-tandem mass spectrometry: application to postmortem diagnostics of forensic interest.

A quantitative LC-MS/MS method has been developed for the simultaneous determination of 17 antipsychotic drugs in human postmortem brain tissue. Sample preparation was performed using Hybrid Solid Phase Extraction-Precipitation technology for the removal of endogenous protein and phospholipid interferences. The chromatographic separation was performed for 16 min on a C8 column, which used a gradient elution of formate ammonium and acetonitrile, and a flow rate gradient.

Chiral imprinted polymers as enantiospecific coatings of stir bar sorptive extraction devices.

This paper reports the design of Molecularly Imprinted Polymers (MIP) with affinity towards (S)-citalopram using computational modeling for the selection of functional monomers and monomer:template ratio. Acrylamide was selected as functional monomer and the final complex functional monomer/template resulted in a 3:1 ratio. The polymer was synthesized by radical polymerization initiated by UV onto magnetic stir-bars in order to obtain a stir bar sorptive extraction (SBSE) device capable of selective enantiomeric recognition.

A retention time locked gas chromatography-mass spectrometry method based on stir-bar sorptive extraction and thermal desorption for automated determination of synthetic musk fragrances in natural and wastewaters.

A stir-bar sorptive extraction (SBSE) method followed by automated thermal desorption (ATD) coupled to gas chromatography-mass spectrometry was optimized for determining trace levels of 18 synthetic fragrances (musks). Using the method developed a retention time locked library is created and converted to a screening database. This homebuilt database can be combined with deconvolution software for the identification of musks.

Multi-residue analysis of pharmaceutical compounds in wastewaters by dual solid-phase microextraction coupled to liquid chromatography electrospray ionization ion trap mass spectrometry.

The aim of this article is to present a new procedure based on dual solid-phase microextraction (dSPME) for the simultaneous extraction of 16 pharmaceutical compounds with acidic and basic characteristics in urban wastewaters. Water samples are divided into two aliquots of 2 mL each extracted by two CW-TPR fibers at different pH values (pH 3 and 11) and with a NaCl concentration of 300 g L(-1) at 75 degrees C for 30 min. The analytes in both fibers are desorbed one after the other in the desorption chamber in static mode with mobile phase for 10 min.

Development of a stir bar sorptive extraction based HPLC-FLD method for the quantification of serotonin reuptake inhibitors in plasma, urine and brain tissue samples.

The aim of this article is to present an analytical application of stir bar sorptive extraction (SBSE) coupled to HPLC-fluorescence detection (FLD) for the quantification of fluoxetine (FLX), citalopram (CIT) and venlafaxine (VLF) and their active metabolites - norfluoxetine (NFLX), desmethyl- (DCIT) and didesmethylcitalopram (DDCIT) and o-desmethylvenlafaxine (ODV) - in plasma, urine and brain tissue samples. All the parameters influencing adsorption (pH, ion strength, organic modifier addition, volume, extraction time and temperature) and desorption (desorption solvent composition, time, temperature and desorption mode) of the analytes on the stir bar have been optimized. For each matrix, the analytical method has been assessed by studying the linearity and the intra- and interday accuracy (89-113%) and precision (RSD<13%).

Simultaneous determination of citalopram, fluoxetine and their main metabolites in human urine samples by solid-phase microextraction coupled with high-performance liquid chromatography.

A liquid chromatography method was developed for the determination of some frequently prescribed selective serotonin re-uptake inhibitors (SSRI) - citalopram and fluoxetine - and its main metabolites - demethylcitalopram, didemethylcitalopram and norfluoxetine - in human urine samples, using a previous stage of solid-phase microextraction. All the extraction parameters influencing adsorption (extraction time, temperature, pH, ion strength and organic modifier addition) and desorption (desorption time and desorption solvent mixture composition) of the analytes on the fiber have been studied. A satisfactory reproducibility for extraction from urine samples (R.