Molecularly Imprinted Polypyrrole-Modified Screen-Printed Electrode for Dopamine Determination.

This paper introduces a quantitative method for dopamine determination. The method is based on a molecularly imprinted polypyrrole (e-MIP)-modified screen-printed electrode, with differential pulse voltammetry (DPV) as the chosen measurement technique. The dopamine molecules are efficiently entrapped in the polymeric film, creating recognition cavities.

An Optical Device Based on a Chemical Chip and Surface Plasmon Platform for 2-Furaldehyde Detection in Insulating Oil.

2-Furaldehyde (2-FAL) is one of the main by-products of the degradation of hemicellulose, which is the solid material of the oil-paper insulating system of oil-filled transformers. For this reason, it has been suggested as a marker of the degradation of the insulating system; sensing devices for 2-FAL analysis in a wide concentration range are of high interest in these systems. An optical sensor system is proposed; this consists of a chemical chip, able to capture 2-FAL from the insulating oil, coupled with a surface plasmon resonance (SPR) probe, both realized on multimode plastic optical fibers (POFs).

Splitter-Based Sensors Realized via POFs Coupled by a Micro-Trench Filled with a Molecularly Imprinted Polymer.

An optical-chemical sensor based on two modified plastic optical fibers (POFs) and a molecularly imprinted polymer (MIP) is realized and tested for the detection of 2-furaldehyde (2-FAL). The 2-FAL measurement is a scientific topic of great interest in different application fields, such as human health and life status monitoring in power transformers. The proposed sensor is realized by using two POFs as segmented waveguides (SW) coupled through a micro-trench milled between the fibers and then filled with a specific MIP for the 2-FAL detection.

The colorful world of sulfonephthaleins: Current applications in analytical chemistry for "old but gold" molecules.

Sulfonephthaleins represent one of the most common and widely employed reactive dyes in analytical chemistry, thanks to their stability, low-cost, well-visible colors, reactivity and possibilities of chemical modification. Despite being first proposed in 1916, nowadays, these molecules play a fundamental role in biological and medical applications, environmental analyses, food quality monitoring and other fields, with a particular focus on low-cost and disposable devices or methods for practical applications. Since up to our knowledge, no reviews or book chapters focused explicitly on sulfonephthaleins have ever been published, in this review, we will briefly describe sulfonephthaleins history, their acid-base properties will be discussed, and the most recent applications in different fields will be presented, focusing on the last ten years literature (2014-2023).

Exploring albumin-sulfonephthalein dyes interactions by a chemometric-assisted and multi-technique equilibria analysis in solution.

Albumin is undoubtedly the most studied protein thanks to its widespread diffusion and biochemistry; despite its binding ability towards different dyes, provoking dye's colour change, has been exploited for decades for quantification purposes, the joint effect of working pH, ionic strength, and dye's pK still remains only sporadically discussed. In the present study, the interaction of Bovine Serum Albumin (BSA) with five dyes belonging to the sulfonephthalein group, Bromophenol Blue (BPB, pK = 3.75), Bromocresol Green (BCG, pK = 4.

A Screen-Printed Voltammetric Sensor Modified with Electropolymerized Molecularly Imprinted Polymer (eMIP) to Determine Gallic Acid in Non-Alcoholic and Alcoholic Beverages.

This paper presents a low-cost disposable sensor for gallic acid (GA) detection in non-alcoholic and alcoholic beverages using a screen-printed cell (SPC) whose working electrode (in graphite) is modified with electrosynthesized molecularly imprinted polypyrrole (eMIP). Our preliminary characterization of the electrochemical process shows that gallic acid (GA) undergoes irreversible oxidation at potentials of about +0.3 V.

Molecularly Imprinted Polymer-based voltammetric sensor for amino acids/indazole derivatives synthetic cannabinoids detection.

Background: Synthetic cannabinoids (SCs) are a broad class of illicit drugs that are classified according to the chemical structure of the aromatic core that they present (i.e., indole, imidazole, pyrrole) and their detection is still a challenge, despite their widespread diffusion.

A new cysteamine-copper chemically modified screen-printed gold electrode for glyphosate determination.

A chemically modified screen-printed gold electrode has been prepared by covering the electrode surface with a cysteamine-copper self-assembled monolayer (SAM). The sensor was effective for the voltammetric sensing of glyphosate. The method exploits the interaction of glyphosate with copper ions complexed by cysteamine, which results in a decrease in the intensity of copper redox current.

Colorimetric Paper-Based Analytical Devices (PADs) Backed by Chemometrics for Pd(II) Detection.

This paper presents the development of cheap and selective Paper-based Analytical Devices (PADs) for selective Pd(II) determination from very acidic aqueous solutions. The PADs were obtained by impregnating two cm-side squares of filter paper with an azoic ligand, (2-(tetrazolylazo)-1,8 dihydroxy naphthalene-3,6,-disulphonic acid), termed TazoC. The so-obtained orange TazoC-PADs interact quickly with Pd(II) in aqueous solutions by forming a complex purple-blue-colored already at pH lower than 2.

Synthesis, Characterization and Application of a MIP-polyHIPE for Selective Extraction of Angiotensin II Receptor Antagonists Residues in Natural Waters.

Polymers via high internal phase emulsion (polyHIPEs) were molecularly imprinted with Irbesartan, an antihypertensive drug belonging to the class of angiotensin II receptor antagonists (sartan drugs), chosen for the proof-of-concept extraction of hazardous emerging contaminants from water. Different analyte-functional monomer molar ratios (1:100, 1:30 and 1:15) were investigated, and the MIP polyHIPEs have been characterized, parallel to the not imprinted polymer (NIP), by batch sorption experiments. The material with the highest template-functional monomer ratio was the best for Irbesartan removal, showing a sorption capacity fivefold higher than the NIP.

Chemometric-Assisted Litmus Test: One Single Sensing Platform Adapted from 1-13 to Narrow pH Ranges.

A novel 3 × 4 colorimetric sensing platform, named the chemometric-assisted litmus test (CLT), has been developed by covalently anchoring commercial pH indicators to ethylene vinyl alcohol (EVOH). The proposed device can be exploited for pH determinations in a wide range from 1 to 13 and in specific narrow ranges, achieving sufficient accuracy and errors below 0.5 pH units.

Potentiometric MIP-Modified Screen-Printed Cell for Phenoxy Herbicides Detection.

In this study, a molecularly imprinted polymer (MIP)-based screen-printed cell is developed for detecting phenoxy herbicides using 2-methyl-4-chlorophenoxyacetic acid (MCPA) as the template. MCPA is a phenoxy herbicide widely used since 1945 to control broadleaf weeds via growth regulation, primarily in pasture and cereal crops. The potentiometric cell consists of a silver/silver chloride pseudo-reference electrode and a graphite working electrode coated with a MIP film.

Detection of 2-Furaldehyde in Milk by MIP-Based POF Chips Combined with an SPR-POF Sensor.

An innovative optical-chemical sensor has been used to detect the 2-furaldehyde (2-FAL) in milk. The proposed sensing approach exploits the refractive index changing in a microstructured chip based on a plastic optical fiber (POF) with orthogonal micro-holes containing a specific molecularly imprinted polymer (MIP). This POF-MIP chemical chip modifies the surface plasmon resonance (SPR) phenomena excited in another sensor chip realized in POFs (SPR-POF) and connected in series.

RGB-Detector: A Smart, Low-Cost Device for Reading RGB Indexes of Microfluidic Paper-Based Analytical Devices.

A user-friendly, low-cost detector able to read the RGB indexes of microfluidic paper-based analytical devices (µPADs) was developed. The RGB-detector was built with 3D printing using PLA+ and reused Li-ion batteries. It is Arduino-based, which provides an easy interface between the sensor TCS3200, which reads the quadratic wave of the times corresponding to the RGB numbers, the Arduino itself, whose software translates the times into RGB values, and the touchscreen display, NX3224T028, which shows the results.

Quick and Easy Covalent Grafting of Sulfonated Dyes to CMC: From Synthesis to Colorimetric Sensing Applications.

Carboxymethyl cellulose, the most promising cellulose-derivatives, pulls together low cost, abundancy, biocompatibility, unique properties and, unlike the precursor, chemical reactivity. This latter aspect arouses the curiosity of chemists around the possibility of chemical modification and the production of interesting functional materials. Here, a two-step reaction is proposed for the covalent anchoring of a wide variety of molecules containing sulfonic groups to CMC.

An Optical Fiber Sensor for Uranium Detection in Water.

An optical sensor for uranyl has been prepared based on a gold-plated D-shaped plastic optical fiber (POF) combined with a receptor consisting of a bifunctional synthetic molecule, 11-mercaptoundecylphosphonic acid (MUPA), with a phosphonic group for complexing the considered ion, and a sulfide moiety through which the molecule is fixed at the gold resonant surface as a molecular layer in an easy and reproducible way. The sensor is characterized by evaluating the response in function of the uranyl concentration in aqueous solutions of different compositions and real-life samples, such as tap water and seawater. The mechanism of the uranyl/MUPA interaction was investigated.

Towards intelligent packaging: BCP-EVOH@ optode for milk freshness measurement.

Intelligent packaging represents an emerging trend in the food industry, especially for highly perishable foods like milk and dairy products. Despite the apparent simplicity, miniaturized BCP-EVOH@ sensor, made of bromocresol purple (BCP) covalently bound to ethylene-vinyl alcohol (EVOH) copolymer, meets the goal of milk freshness monitoring during chilled storage, allowing both naked-eye evaluation and chemometric-assisted spoilage modelling and measurements.

Cathode Active Material Recycling from Spent Lithium Batteries: A Green (Circular) Approach Based on Deep Eutectic Solvents.

The transition to a circular economy vision must handle the increasing request of metals required to satisfy the battery industry; this can be obtained by recycling and feeding back secondary raw materials recovered through proper waste management. Here, a novel and green proof-of-concept was developed, based on deep eutectic solvents (DESs) to fully and easily recover valuable metals from various cathode active materials, including LiMn O , LiNi Mn O , and LiNi Co O . DES composed of choline chloride and lactic acid could leach Li, Mn, Co, and Ni, achieving efficiency of 100 % under much milder conditions with respect to the previous literature.

SPR-Optical Fiber-Molecularly Imprinted Polymer Sensor for the Detection of Furfural in Wine.

A surface plasmon resonance (SPR) platform, based on a D-shaped plastic optical fiber (POF), combined with a biomimetic receptor, i.e., a molecularly imprinted polymer (MIP), is proposed to detect furfural (2-furaldheide, 2-FAL) in fermented beverages like wine.

Chelating Agents in Soil Remediation: A New Method for a Pragmatic Choice of the Right Chelator.

Soil pollution by metal ions constitutes one of the most significant environmental problems in the world, being the ecosystems of extended areas wholly compromised. The remediation of soils is an impelling necessity, and different methodologies are used and studied for reaching this goal. Among them, the application of chelating agents is one of the most promising since it could allow the removal of metal ions while preserving the most meaningful properties of the original soils.

Disposable and Low-Cost Colorimetric Sensors for Environmental Analysis.

Environmental contamination affects human health and reduces the quality of life. Therefore, the monitoring of water and air quality is important, ensuring that all areas are acquiescent with the current legislation. Colorimetric sensors deliver quick, naked-eye detection, low-cost, and adequate determination of environmental analytes.

Development of a Dye-Based Device to Assess Poultry Meat Spoilage. Part I: Building and Testing the Sensitive Array.

The rationale behind the material and dye selection and the investigation of the properties of a solid-phase sensor array designed for following chicken meat spoilage is presented, having in mind that the final target must be the naked eye identification of the degradation steps. The device is obtained by fixing five acid-base indicators, -cresol purple (1), -cresol red (2), bromothymol blue (3), thymol blue (4), and chlorophenol red (5), and a sensing molecule specific for thiols, 5,5'-dithiobis(2-nitrodibenzoic acid), called Ellman's reagent, (6) on a commercial cellulose-based support. The dimensions of the sensor and the amount of dye sorbed on the solid are carefully studied.

Development of a Dye-Based Device to Assess the Poultry Meat Spoilage. Part II: Array on Act.

This work presents a colorimetric dye-based array for naked-eye detection of chicken meat spoilage. The array is obtained by fixing five acid-base indicators, -cresol purple (), -cresol red (), bromothymol blue (), thymol blue (), and chlorophenol red (), and a sensing molecule specific for thiols, 5,5'-dithiobis(2-nitrodibenzoic acid), called Ellman's reagent (), on a cellulose-based support. The dyes, being permanently charged, are fixed on the support via ion-exchange.

Colorimetric Sensor Array for Monitoring, Modelling and Comparing Spoilage Processes of Different Meat and Fish Foods.

Meat spoilage is a very complex combination of processes related to bacterial activities. Numerous efforts are underway to develop automated techniques for monitoring this process. We selected a panel of pH indicators and a colourimetric dye, selective for thiols.

Salicylamide derivatives for iron and aluminium sequestration. From synthesis to complexation studies.

This paper presents an easy, fast and economic synthesis of chelating agents for medical, environmental and analytical applications, and the evaluation of the stability of their complexes with Fe and Al. Complex formation equilibria with Cu and Zn metal ions were also studied to evaluate if the chelating agents can perturb the homeostatic equilibria of these essential metal ions. Effective chelating agents for metal ions, in addition to their well-known medical uses, find an increasing number of applications in environmental remediation, agricultural applications (supplying essential elements in an easily available form), and in analytical chemistry as colorimetric reagents.