Physical stability and in vivo brain delivery of polymeric ibuprofen nanoparticles fabricated by flash nanoprecipitation.

Ibuprofen (IBP), a common non-steroidal anti-inflammatory drug (NSAID) with a log P of 3.51, has been shown to possess potential benefit in the treatment of Alzheimer's disease. However, the bioavailability of IBP to the brain is poor, which can be linked to its extensive binding to plasma proteins in the blood.

Converting nanosuspension into inhalable and redispersible nanoparticles by combined in-situ thermal gelation and spray drying.

While nanoparticulate drugs for deep lung delivery hold promise for particular disease treatments, their size-related physical instability and tendency of being exhaled during breathing remain major challenges to their inhaled formulation development. Here we report a viable method for converting drug nanosuspensions into inhalable, stable and redispersible nano-agglomerates through combined in-situ thermal gelation and spray drying. Itraconazole (ITZ) nanosuspensions were prepared by flash nanoprecipitation, and co-spray dried with two different grades of the gel-forming polymer, methylcellulose (MC M20 and MC M450) as protectants.

Thermodynamic and kinetic evaluation of the impact of polymer excipients on storage stability of amorphous itraconazole.

Two pharmaceutical polymers with high glass transition temperatures (T > 100 °C), polyvinylpyrrolidone-vinyl acetate copolymer (PVPVA) and hydroxypropyl methylcellulose acetate succinate (HPMCAS), have been assessed for their impact on the storage stability of itraconazole (ITZ) amorphous solid dispersions (ASDs). The results showed that the inhibitory effect of PVPVA on the recrystallization of amorphous ITZ was highly sensitive to surrounding relative humidity (RH), especially at RH above 60%. In contrast, amorphous ITZ in HPMCAS matrix exhibited much stronger resistance to recrystallization even under high RH conditions, reflecting the superior crystallization-inhibitory effect of HPMCAS.

Impact of molecular rearrangement of amphiphilic stabilizers on physical stability of itraconazole nanoparticles prepared by flash nanoprecipitation.

Flash nanoprecipitation (FNP) is a controlled antisolvent precipitation process that has proven effective for consistent production of drug nanoparticles with a defined mean particle size and narrow particle size distribution. However, physical instability of the generated nanoparticles remains a major challenge in the application of this technology in pharmaceutical formulation. Aimed at resolving this problem, the present study has investigated the FNP process and associated stabilization mechanism of itraconazole (ITZ) nanoparticles through in-depth nanoparticle characterization.

Fabrication of doxorubicin nanoparticles by controlled antisolvent precipitation for enhanced intracellular delivery.

Over-expression of ATP-binding cassette transporters is one of the most important mechanisms responsible for multidrug resistance. Here, we aimed to develop a stable polymeric nanoparticle system by flash nanoprecipitation (FNP) for enhanced anticancer drug delivery into drug resistant cancer cells. As an antisolvent precipitation process, FNP works best for highly lipophilic solutes (logP>6).

Particle size tailoring of ursolic acid nanosuspensions for improved anticancer activity by controlled antisolvent precipitation.

The present study was aimed at tailoring the particle size of ursolic acid (UA) nanosuspension for improved anticancer activity. UA nanosuspensions were prepared by antisolvent precipitation using a four-stream multi-inlet vortex mixer (MIVM) under defined conditions of varying solvent composition, drug feeding concentration or stream flow rate. The resulting products were characterized for particle size and polydispersity.

Development of highly stabilized curcumin nanoparticles by flash nanoprecipitation and lyophilization.

The influence of critical operating parameters on the Flash Nanoprecipitation (FNP) and resulting material properties of curcumin (CUR) nanoparticles has been evaluated using a confined impinging jets-with-dilution mixer (CIJ-D-M). It has been shown that the mixing rate, molecular weight of polymeric stabilizer (i.e.

Curcumin-conjugated magnetic nanoparticles for detecting amyloid plaques in Alzheimer's disease mice using magnetic resonance imaging (MRI).

Diagnosis of Alzheimer's disease (AD) can be performed with the assistance of amyloid imaging. The current method relies on positron emission tomography (PET), which is expensive and exposes people to radiation, undesirable features for a population screening method. Magnetic resonance imaging (MRI) is cheaper and is not radioactive.

Assessment of the relative performance of a confined impinging jets mixer and a multi-inlet vortex mixer for curcumin nanoparticle production.

The relative performance of two specially designed mixers for nanoparticle production, namely, two-stream confined impinging jets with dilution mixer (CIJ-D-M) and four-stream multi-inlet vortex mixer (MIVM), was evaluated using the model compound, curcumin (CUR), under defined conditions of varying mixing rate and organic solvent. In the absence of turbulent fluctuations, higher mixing rate tended to generate finer particles. Among the three water-miscible organic solvents tested, acetone afforded the smallest particle size and the narrowest particle size distribution.

Delivery of poorly soluble compounds by amorphous solid dispersions.

Solid state manipulation by amorphous solid dispersion has been the subject of intensive research for decades due to their excellent potential for dissolution and bioavailability enhancement. The present review aims to highlight the latest advancement in this area, with focus on the fundamentals, characterization, formulation development and manufacturing of amorphous solid dispersions as well as the new generation amorphization technologies. Additionally, specific applications of amorphous solid dispersion in the formulation of herbal drugs or bioactive natural products are reviewed to reflect the growing interest in this relatively neglected area.

Highly stabilized curcumin nanoparticles tested in an in vitro blood-brain barrier model and in Alzheimer's disease Tg2576 mice.

The therapeutic effects of curcumin in treating Alzheimer's disease (AD) depend on the ability to penetrate the blood-brain barrier. The latest nanoparticle technology can help to improve the bioavailability of curcumin, which is affected by the final particle size and stability. We developed a stable curcumin nanoparticle formulation to test in vitro and in AD model Tg2576 mice.

Simultaneously improving the mechanical properties, dissolution performance, and hygroscopicity of ibuprofen and flurbiprofen by cocrystallization with nicotinamide.

Purpose: To be fully exploitable in both formulation and manufacturing, a drug cocrystal needs to demonstrate simultaneous improvement of multiple key pharmaceutical properties over the pure drug crystal. The present work was aimed at investigating such feasibility with two model profen-nicotinamide cocrystals.

Methods: Phase pure 1:1 ibuprofen-nicotinamide and flurbiprofen-nicotinamide cocrystals were prepared from solutions through rapid solvent removal using rotary evaporation,and characterized by DSC, PXRD, FTIR, phase solubility measurements, equilibrium moisture sorption analysis, dissolution testing and tabletability analysis.

Formulation of sustained-release microspheres of granulocyte macrophage colony stimulating factor by freezing-induced phase separation with dextran and encapsulation with blended polymers.

This study aimed to assess the potential merits of formulating sustained-release microspheres of recombinant human granulocyte macrophage colony stimulating factor (rhGM-CSF) via freezing-induced phase separation (FIPS) of the protein with dextran followed by encapsulation with binary mixture of poly(lactic-co-glycolic acid) (PLGA) 2A (MW∼12K) and 3A (MW∼47K) or of PLGA2A and polylactic acid (PLA; MW∼83K). The formulated dextran particles and microspheres were characterized in vitro for loading, aggregation, bioactivity and release behavior of the protein where appropriate. rhGM-CSF retained about 60% of bioactivity with no significant aggregation after each formulation step.

Spray freeze drying with polyvinylpyrrolidone and sodium caprate for improved dissolution and oral bioavailability of oleanolic acid, a BCS Class IV compound.

Spray-freeze-drying (SFD) of oleanolic acid (OA), a BCS Class IV compound, with polyvinylpyrrolidone-40 (PVP-40) as stabilizer and sodium caprate (SC) as wetting agent and penetration enhancer produced kinetically stable, amorphous solid dispersion systems with superior in vitro dissolution performance, and better and more uniform absorption in comparison with commercial OA tablet. Relative to the SC-free formulation, the presence of SC in the formulation resulted in a significant increase in the in vivo absorption rate of OA while exerting no apparent impact on the extent of OA absorption. The SFD-processed OA formulations and commercial OA tablet generally exhibited large inter-animal variability in oral bioavailability, consistent with the absorption characteristics of BCS Class IV compounds.

Neuroprotective effect of honokiol and magnolol, compounds from Magnolia officinalis, on beta-amyloid-induced toxicity in PC12 cells.

Amyloid β peptide (Aβ) induced toxicity is a well-established pathway of neuronal cell death which might play a role in Alzheimer's disease. In this regard, the toxic effect of Aβ on a cultured Aβ-sensitive neuronal cell line was used as a primary screening tool for potential anti-Alzheimer's therapeutic agents. The effects of nine pure compounds (vitamin E, α-asarone, salidroside, baicolin, magnolol, gastrodin, bilobalide, honokiol and β-asarone) from selected Chinese herbs on neuronal cell death induced by Aβ in NGF-differentiated PC12 cells were examined.

Process-induced phase transformation of berberine chloride hydrates.

Berberine is a natural quaternary ammonium alkaloid used clinically in the chloride salt form for the treatment of diarrhea in many Asian countries. Although the hydrate formation of berberine chloride (BCl) is well documented, the associated mechanism and implications in pharmaceutical formulation have not been studied in detail. In this study, pure BCl dihydrate and BCl tetrahydrate were recrystallized from water and their phase transformation behaviors under defined conditions were investigated.

Self-nanoemulsifying drug delivery system (SNEDDS) for oral delivery of Zedoary essential oil: formulation and bioavailability studies.

The aim of the present study was to develop a self-nanoemulsifying drug delivery system (SNEDDS) for the oral delivery of Zedoary turmeric oil (ZTO), an essential oil extracted from the dry rhizome of Curcuma zedoaria. Pseudo-ternary phase diagrams were constructed to identify the efficient self-emulsification regions. ZTO could serve as a partial oil phase with the aid of the second oil phase to enhance drug loading.

Production and characterization of a spray-dried hydroxypropyl-beta-cyclodextrin/quercetin complex.

Background: Quercetin (QC) is a poorly water-soluble and degradation-prone bioflavonoid.

Aim: This study aimed to investigate the formation of a chemically stable and readily water-soluble solid complex of QC with hydroxypropyl-beta-cyclodextrin (HP-beta-CD).

Method: A solid HP-beta-CD/QC complex was prepared by spray drying and characterized by high-performance liquid chromatography, Fourier-transform infrared spectroscopy, scanning electron microscopy, laser-diffraction particle sizing, powder X-ray diffraction, thermal analysis, Brunauer-Emmett-Teller nitrogen adsorption, and dissolution testing.

Anti-hygroscopic effect of dextrans in herbal formulations.

Equilibrium moisture sorptions of two dried aqueous herbal extracts and their mixtures with dextrans of various molecular weights were investigated as a function of relative humidity at ambient temperature, and the data were analyzed by both the Guggenheim-Anderson-deBoer (GAB) and Brunauer-Emmett-Teller (BET) equations. Glass transition temperatures (T(g)) of the samples were measured by differential scanning calorimetry, and their dependence on the moisture contents of the extracts was analyzed by the linear, Fox and expanded Gordon-Taylor mathematical models. All dextran-extract mixtures exhibited single T(g) values, indicating that they existed as single homogeneous phases.

Physical characterization of oleanolic acid nonsolvate and solvates prepared by solvent recrystallization.

Oleanolic acid is a naturally occurring compound used clinically in China for the treatment of hepatitis B. The solid-state chemistry of oleanolic acid recrystallized from a variety of solvents was investigated. Glassy materials were prepared from dichloromethane and chloroform solvents.

Engineering of pharmaceutical materials: an industrial perspective.

Crystal engineering provides a rational approach to solving formulation, processing and product performance problems. This review discusses how the concept of crystal engineering can be judiciously utilized to manipulate the solid-state properties of drugs and excipients for successful pharmaceutical formulation and process development. Existing and emerging manufacturing as well as co-processing technologies being applied in the pharmaceutical industry are also presented together with selected examples of crystal form design, crystal form selection and crystal modifications for illustration purposes.

Influence of operating temperature and pressure on the polymorphic transition of salmeterol xinafoate in supercritical fluids.

Precipitation of pure polymorphic forms (I and II) of salmeterol xinafoate (SX) in supercritical fluids was investigated as a function of operating pressure and temperature. It has been shown that the formation of each polymorph is governed by both thermodynamic shift and kinetic effects, which are closely associated with the extent of miscibility between the supercritical CO(2) and methanol cosolvent. In addition, the surface energetics of SX exhibit a sharp discontinuity at the transition point in concordance with the particular polymorphic form generated, being essentially independent of the temperature or pressure below and above this point.

Structure and drug release in a crosslinked poly(ethylene oxide) hydrogel.

Hydrogels are a continuously expanding class of pharmaceutical polymers designed for sustained or controlled drug release. The structure and intermolecular interactions in such systems define their macroscopic properties. The aim of this study was to investigate the mechanism of swelling, drug impregnation, and drug release from poly(ethylene oxide) (PEO) gel crosslinked by urethane bonds.

Particle engineering for pulmonary drug delivery.

With the rapidly growing popularity and sophistication of inhalation therapy, there is an increasing demand for tailor-made inhalable drug particles capable of affording the most efficient delivery to the lungs and the most optimal therapeutic outcomes. To cope with this formulation demand, a wide variety of novel particle technologies have emerged over the past decade. The present review is intended to provide a critical account of the current goals and technologies of particle engineering for the development of pulmonary drug delivery systems.