Calibration possibilities and modifier use in ETV ICP OES determination of trace and minor elements in plant materials.

The possibilities for universal calibration based on multi-element aqueous standard solutions and graphite laboratory reference materials (graphite standards) for the electrothermal vaporization inductively coupled plasma optical emission spectrometric (ETV ICP OES) determination of Al, B, Ba, Cd, Co, Cr, Cu, Fe, Mn, Ni, P, Pb, S, Sr, Ti, V, and Zn in plant materials were investigated. A commercially available state-of-the-art ETV device was coupled with an Echelle ICP spectrometer equipped with a charge-injection-device (CID) camera for spectral detection. The transition area between transport tube and ETV graphite tube and the gas streams for inner gas, bypass gas, and modifier gas were optimized to achieve best transport efficiencies.

Validation of mercury determination by solid sampling Zeeman atomic absorption spectrometry and a specially designed furnace.

Certified reference materials (CRMs) of different origin were used to validate the direct determination of total mercury by solid sampling Zeeman atomic absorption spectrometry (SS-ZAAS) and a specially designed furnace. The temperature program provides only for one step. Atomisation of mercury and pyrolysis of the matrix is performed at a constant temperature in the range of 900-1000 degrees C.

Slurry sampling ETAAS determination of sodium impurities in optical crystals of potassium titanyl phosphate and potassium gadolinium tungstate.

Slurry sampling ETAAS was successfully applied to the determination of sodium impurities in single crystals of potassium titanyl phosphate (KTP) and potassium gadolinium tungstate (KGW). Platform atomizers coated with titanium carbide or tungsten carbide, respectively, were used in order to avoid sensitivity drift due to the changes in the composition and the structure of the platform surface. Calibration curves with aqueous standards could be used for the KGW slurry (no matrix effects); analysis of KTP slurry required the standard additions method.

Electrothermal atomization of arsenic, antimony and thallium using a graphite atomizer with refractory metal platforms.

The electrothermal atomization of the volatile elements arsenic, antimony and thallium from a refractory metal platform consisting of a tungsten coil and/or a refractory metal foil with the dimensions of a conventional graphite platform was studied. Several combinations of refractory metal platforms were investigated, as follows: W platform; Ta platform; W coil; W coil on a W platform and W coil on a Ta platform. The best combination for these elements as regards both thermal stabilization and sensitivity is the W coil on a Ta platform.