Influence of oxygen distribution on the Li-ion conductivity in oxy-sulfide glasses - taking a closer look.

Lithium thiophosphates are a promising class of solid electrolyte (SE) materials for all-solid-state batteries (ASSBs) due to their high Li-ion conductivity. Yet, the practical application of lithium thiophosphates is hindered by their chemical instability, which remains a prevalent challenge in the field. Oxygen substitution has been discussed in the literature as a promising strategy to enhance stability.

Modelling atomic and nanoscale structure in the silicon-oxygen system through active machine learning.

Silicon-oxygen compounds are among the most important ones in the natural sciences, occurring as building blocks in minerals and being used in semiconductors and catalysis. Beyond the well-known silicon dioxide, there are phases with different stoichiometric composition and nanostructured composites. One of the key challenges in understanding the Si-O system is therefore to accurately account for its nanoscale heterogeneity beyond the length scale of individual atoms.

SiCO Ceramics as Storage Materials for Alkali Metals/Ions: Insights on Structure Moieties from Solid-State NMR and DFT Calculations.

Polymer-derived silicon oxycarbide ceramics (SiCO) have been considered as potential anode materials for lithium- and sodium-ion batteries. To understand their electrochemical storage behavior, detailed insights into structural sites present in SiCO are required. In this work, the study of local structures in SiCO ceramics containing different amounts of carbon is presented.

The origin of jerky dislocation motion in high-entropy alloys.

Dislocations in single-phase concentrated random alloys, including high-entropy alloys (HEAs), repeatedly encounter pinning during glide, resulting in jerky dislocation motion. While solute-dislocation interaction is well understood in conventional alloys, the origin of individual pinning points in concentrated random alloys is a matter of debate. In this work, we investigate the origin of dislocation pinning in the CoCrFeMnNi HEA.

On the Origin of Zero Interface Resistance in the LiAlLaZrO|Li System: An Atomistic Investigation.

Understanding the nature of ion transfer at the interface between Li metal and solid electrolytes (SE) is essential for further optimization of all-solid-state Li-ion batteries. Thus, the Li transfer across the SE|Li metal interface is investigated by means of ab initio calculations based on density functional theory in this work. The aluminum-doped garnet LiAlLaZrO (LLZO) is considered as a model SE due to its practical stability against Li metal.

Influence of Br/S site-exchange on Li diffusion mechanism in LiPSBr: a computational study.

We investigate how low degrees of [Formula: see text] site-exchange influence the [Formula: see text] diffusion in the argyrodite-type solid electrolyte [Formula: see text] by molecular dynamics simulations. Based on the atomic trajectories of the defect-free material, a new mechanism for the internal [Formula: see text] reorganization within the [Formula: see text] cages around the [Formula: see text] sites is identified. This reorganization mechanism is highly concerted and cannot be described by just one rotation axis.

Role of Chiral Two-Body Currents in ^{6}Li Magnetic Properties in Light of a New Precision Measurement with the Relative Self-Absorption Technique.

A direct measurement of the decay width of the excited 0_{1}^{+} state of ^{6}Li using the relative self-absorption technique is reported. Our value of Γ_{γ,0_{1}^{+}→1_{1}^{+}}=8.17(14)_{stat.

Experimental and theoretical investigation of the chemical exfoliation of Cr-based MAX phase particles.

Two-dimensional carbides/nitrides, typically called MXenes, are an emerging member of the ever-growing family of two-dimensional materials. The prediction of a ferromagnetic groundstate in chromium-containing MXenes has triggered growing interest in their chemical exfoliation from Cr-based MAX phases. However, the exfoliation poses serious difficulties using standard etching agents such as hydrofluoric acid (HF).

Secondary-Phase-Assisted Grain Boundary Migration in CuInSe_{2}.

Significant structural evolution occurs during the deposition of CuInSe_{2} solar materials when the Cu content increases. We use in situ heating in a scanning transmission electron microscope to directly observe how grain boundaries migrate during heating, causing nondefected grains to consume highly defected grains. Cu substitutes for In in the near grain boundary regions, turning them into a Cu-Se phase topotactic with the CuInSe_{2} grain interiors.

Reactivity of Isocyanate-Functionalized Lignins: A Key Factor for the Preparation of Lignin-Based Polyurethanes.

Using isocyanate-functionalized Kraft lignin as a reactive macromonomer for the preparation of polyurethane foams by a prepolymer technique is a well-known strategy to incorporate the biomacromolecule into a higher value polymer material. However, as of today the mechanical properties of the resulting materials are still insufficient for a number of possible applications. One reason for this limitation is that the reaction pathway and the morphological arrangement of such foams is of uttermost complexity and depends on a large number of influencing material-intrinsic factors.

Origins of the Inverse Electrocaloric Effect.

The occurrence of the inverse (or negative) electrocaloric effect, where the isothermal application of an electric field leads to an increase in entropy and the removal of the field decreases the entropy of the system under consideration, is discussed and analyzed. Inverse electrocaloric effects have been reported to occur in several cases, for example, at transitions between ferroelectric phases with different polarization directions, in materials with certain polar defect configurations, and in antiferroelectrics. This counterintuitive relationship between entropy and applied field is intriguing and thus of general scientific interest.

Analytical interatomic bond-order potential for simulations of oxygen defects in iron.

We present an analytical bond-order potential for the Fe-O system, capable of reproducing the basic properties of wüstite as well as the energetics of oxygen impurities in [Formula: see text]-iron. The potential predicts binding energies of various small oxygen-vacancy clusters in [Formula: see text]-iron in good agreement with density functional theory results, and is therefore suitable for simulations of oxygen-based defects in iron. We apply the potential in simulations of the stability and structure of Fe/FeO interfaces and FeO precipitates in iron, and observe that the shape of FeO precipitates can change due to formation of well-defined Fe/FeO interfaces.

Highly Porous Silicon Embedded in a Ceramic Matrix: A Stable High-Capacity Electrode for Li-Ion Batteries.

We demonstrate a cost-effective synthesis route that provides Si-based anode materials with capacities between 2000 and 3000 mAh·g (400 and 600 mAh·g), Coulombic efficiencies above 99.5%, and almost 100% capacity retention over more than 100 cycles. The Si-based composite is prepared from highly porous silicon (obtained by reduction of silica) by encapsulation in an organic carbon and polymer-derived silicon oxycarbide (C/SiOC) matrix.

Reconciling Local Structure Disorder and the Relaxor State in (Bi1/2Na1/2)TiO3-BaTiO3.

Lead-based relaxor ferroelectrics are key functional materials indispensable for the production of multilayer ceramic capacitors and piezoelectric transducers. Currently there are strong efforts to develop novel environmentally benign lead-free relaxor materials. The structural origins of the relaxor state and the role of composition modifications in these lead-free materials are still not well understood.

Influence of grain size and composition, topology and excess free volume on the deformation behavior of Cu-Zr nanoglasses.

The influence of grain size and composition on the mechanical properties of Cu-Zr nanoglasses (NGs) is investigated by molecular dynamics simulations using two model glasses of different alloy composition, namely CuZr (Cu-rich) and CuZr (Zr-rich). When the grain size is increased, or the fraction of interfaces in these NGs is decreased, we find a transition from a homogeneous to an inhomogeneous plastic deformation, because the softer interfaces are promoting the formation shear transformation zones. In case of the Cu-rich system, shear localization at the interfaces is most pronounced, since both the topological order and free volume content of the interfaces are very different from the bulk phase.

Low temperature heat capacity of a severely deformed metallic glass.

The low temperature heat capacity of amorphous materials reveals a low-frequency enhancement (boson peak) of the vibrational density of states, as compared with the Debye law. By measuring the low-temperature heat capacity of a Zr-based bulk metallic glass relative to a crystalline reference state, we show that the heat capacity of the glass is strongly enhanced after severe plastic deformation by high-pressure torsion, while subsequent thermal annealing at elevated temperatures leads to a significant reduction. The detailed analysis of corresponding molecular dynamics simulations of an amorphous Zr-Cu glass shows that the change in heat capacity is primarily due to enhanced low-frequency modes within the shear band region.

Deformation-induced grain growth and twinning in nanocrystalline palladium thin films.

The microstructure and mechanical properties of nanocrystalline Pd films prepared by magnetron sputtering have been investigated as a function of strain. The films were deposited onto polyimide substrates and tested in tensile mode. In order to follow the deformation processes in the material, several samples were strained to defined straining states, up to a maximum engineering strain of 10%, and prepared for post-mortem analysis.

Plasticity of nanocrystalline alloys with chemical order: on the strength and ductility of nanocrystalline Ni-Fe.

Plastic deformation and alloying of nanocrystalline Ni-Fe is studied by means of atomic scale computer simulations. By using a combination of Monte-Carlo and molecular dynamics methods we find that solutes have an ordering tendency even if grain sizes are in the nanometer regime, where the phase field of the ordered state is widened as compared to larger grain sizes. Tensile testing of disordered structures with various elemental distributions and the simultaneous analysis of intragranular defects reveal that solid solution strengthening is absent for the studied grain sizes.

Plasticity of Cu nanoparticles: Dislocation-dendrite-induced strain hardening and a limit for displacive plasticity.

The plastic behaviour of individual Cu crystallites under nanoextrusion is studied by molecular dynamics simulations. Single-crystal Cu fcc nanoparticles are embedded in a spherical force field mimicking the effect of a contracting carbon shell, inducing pressure on the system in the range of gigapascals. The material is extruded from a hole of 1.

Size-dependent lattice expansion in nanoparticles: reality or anomaly?

Size-dependent lattice expansion of nanoparticles is observed for many ionic compounds, including metal oxides, while lattice contraction prevails for pure metals. However, the physical origin of this effect, which is of importance for the thermodynamic, chemical and electronic properties of nanoparticles, is discussed controversially. After a survey of the experimental literature, revealing a wide variety of materials with size-dependent lattice expansion, we show that the negative surface stress is the key reason for lattice expansion, while the excess of lattice sums or point defects of various charge states can be excluded as general explanations.

Size-dependent phase diagrams of metallic alloys: A Monte Carlo simulation study on order-disorder transitions in Pt-Rh nanoparticles.

Nanoparticles of Pt-Rh were studied by means of lattice-based Monte Carlo simulations with respect to the stability of ordered D0(22)- and 40-phases as a function of particle size and composition. By thermodynamic integration in the semi-grand canonical ensemble, phase diagrams for particles with a diameter of 7.8 nm, 4.

Kinetic lattice Monte-Carlo simulations on the ordering kinetics of free and supported FePt L1(0)-nanoparticles.

The ordering kinetics in free and supported L1(0) nanoparticles was studied by means of lattice-based kinetic Monte-Carlo simulations. Starting from a fully disordered particle of Wulff shape, the simulations show that the nucleation of ordered domains is starting quickly on various (100) facets but is retarded in the particle volume due to the lack of vacancies compared with a thin film geometry. If a substrate is present, we do not find significant differences in the ordering behavior.

Orientation dependent ionization potential of In2O3: a natural source for inhomogeneous barrier formation at electrode interfaces in organic electronics.

The ionization potentials of In(2)O(3) films grown epitaxially by magnetron sputtering on Y-stabilized ZrO(2) substrates with (100) and (111) surface orientation are determined using photoelectron spectroscopy. Epitaxial growth is verified using x-ray diffraction. The observed ionization potentials, which directly affect the work functions, are in good agreement with ab initio calculations using density functional theory.