Survival, Growth, and Reproduction Responses in a Three-Generation Exposure of the Zebrafish (Danio rerio) to Perfluorooctane Sulfonate.

A prior multigenerational perfluorooctane sulfonic acid (PFOS) exposure investigation in zebrafish reported adverse effects at 0.734 µg/L, among the lowest aquatic effect levels for PFOS reported to date. The present three-generation PFOS exposure quantified survival, growth, reproduction, and vitellogenin (VTG; egg yolk protein) responses in zebrafish, incorporating experimental design and procedural improvements relative to the earlier study.

Additives influence 3D printer emission profiles: Implications for working safely with polymer filament composites.

It is critical to thoroughly investigate, characterize, and understand the unique emission profiles of common and novel polymer feedstocks used in fused filament fabrication (FFF) 3D printers as these products become increasingly ubiquitous in consumer and industrial environments. This work contributes unique insights regarding the effects of polymer composite feedstocks with metal, ceramic, or carbonaceous particle additives on particulate emissions in a variety of filaments under various print conditions, including print temperature. In addition to active characterization of particulate size and concentration following the ANSI/CAN/UL 2904 method, particulate sampling and subsequent analysis by scanning electron microscopy revealed agglomeration behavior that may have important health implications.

Interlaboratory Study of Polyethylene and Polydimethylsiloxane Polymeric Samplers for Ex Situ Measurement of Freely Dissolved Hydrophobic Organic Compounds in Sediment Porewater.

We evaluated the precision and accuracy of multilaboratory measurements for determining freely dissolved concentrations (C ) of polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs) in sediment porewater using polydimethylsiloxane (PDMS) and low-density polyethylene (LDPE) polymeric samplers. Four laboratories exposed performance reference compound (PRC) preloaded polymers to actively mixed and static ex situ sediment for approximately 1 month; two laboratories had longer exposures (2 and 3 months). For C results, intralaboratory precision was high for single compounds (coefficient of variation 50% or less), and for most PAHs and PCBs interlaboratory variability was low (magnitude of difference was a factor of 2 or less) across polymers and exposure methods.

Solving Familiar Problems: Leveraging Environmental Testing Methods for Nanomaterials to Evaluate Microplastics and Nanoplastics.

The potential environmental and human health risks from microplastic (1 µm to 1 mm) and nanoplastic (<1 µm) particles (MNPs) is receiving increasing attention from scientists and the public [...

Effect of UV-light exposure duration, light source, and aging on nitroguanidine (NQ) degradation product profile and toxicity.

Previous studies have reported increased aquatic toxicity of UV-degraded nitroguanidine (NQ), but many details underlying the dynamics of NQ degradation and toxicity remain unknown. These data gaps represent critical barriers to assessing the environmental relevance of laboratory-generated UV-degradation results and extrapolation to environmental risk. In the present study, the toxicity of NQ increased with increasing proportional degradation of the parent compound.

Effect of Activated Carbon in Thin Sand Caps Challenged with Ongoing PCB Inputs from Sediment Deposition: PCB Uptake in Clams (Mercenaria mercenaria) and Passive Samplers.

Ongoing inputs, in the form of sediment deposition along with associated dissolved contaminants, have challenged the assessment of cap performance at contaminated sediment sites. To address this issue, thin 2-3 cm layer sand caps amended with activated carbon (AC) were investigated for the remediation of polychlorinated biphenyl (PCB) contaminated marine sediments using 90-day mesocosms. All treatments were challenged with (1) ongoing clean or marker-PCB-spiked sediment inputs and (2) bioturbation.

Prevention through design: insights from computational fluid dynamics modeling to predict exposure to ultrafine particles from 3D printing.

Fused filament fabrication (FFF) 3D printers are increasingly used in industrial, academic, military, and residential sectors, yet their emissions and associated user exposure scenarios are not fully described. Characterization of potential user exposure and environmental releases requires robust investigation. During operation, common FFF 3D printers emit varying amounts of ultrafine particles (UFPs) depending upon feedstock material and operation procedures.

Comparative Toxicological Evaluation of UV-Degraded versus Parent-Insensitive Munition Compound 1-Methyl-3-Nitroguanidine in Fathead Minnow.

The US Army is replacing traditional munitions with insensitive munitions resistant to accidental detonation. Although the parent insensitive munition compound nitroguanidine (NQ) is generally not acutely toxic at concentrations >1000 mg/L in aquatic exposures, products formed by intensive ultraviolet (UV) degradation resulted in multiple-order of magnitude increases in toxicity. A methylated congener of NQ, 1-methyl-3-nitroguanidine (MeNQ), is also being assessed for potential use in insensitive munition explosive formulations; therefore, the present study investigated the hazard of parent versus UV-degraded MeNQ using fathead minnows (Pimephales promelas).

Different as night and day: Behavioural and life history responses to varied photoperiods in Daphnia magna.

Nearly all animal species have utilized photoperiod to cue seasonal behaviours and life history traits. We investigated photoperiod responses in keystone species, Daphnia magna, to identify molecular processes underlying ecologically important behaviours and traits using functional transcriptomic analyses. Daphnia magna were photoperiod-entrained immediately posthatch to a standard control photoperiod of 16 light/ 8 dark hours (16L:8D) relative to shorter (4L:20D, 8L:16D, 12L:12L) and longer (20L:4D) day length photoperiods.

Bioaccumulation in Functionally Different Species: Ongoing Input of PCBs with Sediment Deposition to Activated Carbon Remediated Bed Sediments.

Activated carbon-amended bed sediments reduced total polychlorinated biphenyl (PCB) accumulation in 3 functionally different marine species, sandworms (Alitta virens), hard clams (Mercenaria mercenaria), and sheepshead minnows (Cyprinodon variegatus), during both clean and contaminated ongoing sediment inputs. Mesocosm experiments were conducted for 90 d to evaluate native, field-aged bed sediment PCBs, and ongoing input PCBs added 3 times a week. Simulated in situ remediation applied an activated carbon dose equal to the native organic carbon content that was premixed into the bed sediment for 1 mo.

Sensitivity of the Marine Calanoid Copepod Pseudodiaptomus pelagicus to Copper, Phenanthrene, and Ammonia.

There are limited acute toxicity test methods for native North American marine species that are considered zooplankton for their entire life cycle. Examples of standardized marine zooplankton methods include mussel, bivalve, and echinoderm development tests that use a relatively short-lived planktonic larval stage, chronic life-cycle toxicity tests using epibenthic copepods, and a 24-h Acartia tonsa copepod test method. The objectives of the present study were to: 1) develop and evaluate a novel, 48-h acute toxicity test method using the marine North American copepod Pseudodiaptomus pelagicus that is planktonic for its entire life cycle, and 2) determine the sensitivity of P.

Effects of soot by-product from the synthesis of engineered metallofullerene nanomaterials on terrestrial invertebrates.

The synthesis of carbon-based nanomaterials is often inefficient, generating large amounts of soot with metals as waste by-product. Currently, there are no specific regulations for disposal of engineered nanomaterials or the waste by-products resulting from their synthesis, so it is presumed that by-products are disposed of in the same way as the parent (bulk) materials. We studied the terrestrial toxicity of soot from gadolinium metallofullerene nanomanufacturing on earthworms (Eisenia fetida) and isopods (Porcellio scaber).

Comparison of acute to chronic ratios between silver and gold nanoparticles, using Ceriodaphnia dubia.

As integration of nanoparticles (NPs) into products becomes more common, the need to address the paucity of chronic hazard information for aquatic environments required to determine risk potential increases. This study generated acute and chronic toxicity reference values for Ceriodaphnia dubia exposed to 20 and 100 nm silver nanoparticles (AgNPs) and gold nanoparticles (AuNPs) to generate and evaluate potential differences in acute-to-chronic ratios (ACR) using two different feeding methods. A modified feeding procedure was employed alongside the standard procedures to investigate the influence of food on organism exposure.

Uptake Kinetics and Trophic Transfer of Tungsten from Cabbage to a Herbivorous Animal Model.

This investigation builds on previous studies on military-relevant tungsten (W) to more thoroughly explore environmental pathways and bioaccumulation kinetics during direct soil exposure versus trophic transfer and elucidate its relative accumulation and speciation in different snail organs. The modeled steady-state concentration and bioaccumulation factor (BAF) of W from soil into cabbage were 302 mg/kg and 0.55, respectively.

Integrate life-cycle assessment and risk analysis results, not methods.

Two analytic perspectives on environmental assessment dominate environmental policy and decision-making: risk analysis (RA) and life-cycle assessment (LCA). RA focuses on management of a toxicological hazard in a specific exposure scenario, while LCA seeks a holistic estimation of impacts of thousands of substances across multiple media, including non-toxicological and non-chemically deleterious effects. While recommendations to integrate the two approaches have remained a consistent feature of environmental scholarship for at least 15 years, the current perception is that progress is slow largely because of practical obstacles, such as a lack of data, rather than insurmountable theoretical difficulties.

The increased toxicity of UV-degraded nitroguanidine and IMX-101 to zebrafish larvae: Evidence implicating oxidative stress.

Insensitive munitions (IMs) improve soldier safety by decreasing sympathetic detonation during training and use in theatre. IMs are being increasingly deployed, although the environmental effects of IM constituents such as nitroguanidine (NQ) and IM mixture formulations such as IMX-101 remain largely unknown. In the present study, we investigated the acute (96h) toxicity of NQ and IMX-101 to zebrafish larvae (21d post-fertilization), both in the parent materials and after the materials had been irradiated with environmentally-relevant levels of ultraviolet (UV) light.

Assessing nanomaterial exposures in aquatic ecotoxicological testing: Framework and case studies based on dispersion and dissolution.

The unique behavior of engineered nanomaterials (ENM) in aqueous media and dynamic changes in particle settling, agglomeration and dissolution rates is a challenge to the consistency, reliability and interpretation of standard aquatic hazard bioassay results. While the toxicological endpoints (e.g.

Aquatic toxicity of photo-degraded insensitive munition 101 (IMX-101) constituents.

Insensitive munitions are desirable alternatives to historically used formulations, such as 2,4,6-trinitrotoluene (TNT), because of their so-called insensitivity to unintended detonation. The insensitive munition IMX-101 is a mixture of 2,4-dinitroanisole (DNAN), 3-nitro-1,2,4-triazol-5-one (NTO), and nitroguanidine (NQ). Environmental releases of munitions may be from production wastewaters or training; these munitions may be exposed to ultraviolet (UV) light.

Effects of Suspended Sediment on Early Life Stages of Smallmouth Bass (Micropterus dolomieu).

The resuspension of sediments caused by activities, such as dredging operations, is a concern in Great Lakes harbors where multiple fish species spawn. To address such concerns, smallmouth bass (Micropterus dolomieu) were exposed to uncontaminated suspended sediment (nominally 0, 100, 250, and 500 mg/L) continuously for 72 h to determine the effects on egg-hatching success and swim-up fry survival and growth. The test sediments were collected from two harbors: (1) fine-grained sediment in Grand Haven Harbor, Lake Michigan, and (2) coarser-grained sediment in Fairport Harbor, Lake Erie.

Advancing Risk Analysis for Nanoscale Materials: Report from an International Workshop on the Role of Alternative Testing Strategies for Advancement.

The Society for Risk Analysis (SRA) has a history of bringing thought leadership to topics of emerging risk. In September 2014, the SRA Emerging Nanoscale Materials Specialty Group convened an international workshop to examine the use of alternative testing strategies (ATS) for manufactured nanomaterials (NM) from a risk analysis perspective. Experts in NM environmental health and safety, human health, ecotoxicology, regulatory compliance, risk analysis, and ATS evaluated and discussed the state of the science for in vitro and other alternatives to traditional toxicology testing for NM.