Microstructure, Mechanical Properties, and Corrosion Behavior of Boron Carbide Reinforced Aluminum Alloy (Al-Fe-Si-Zn-Cu) Matrix Composites Produced via Powder Metallurgy Route.

In this paper, Al-Fe-Si-Zn-Cu (AA8079) matrix composites with several weight percentages of BC (0, 5, 10, and 15) were synthesized by powder metallurgy (PM). The essential amount of powders was milled to yield different compositions such as AA8079, AA8079-5 wt.%BC, AA8079-10 wt.

Shielding Properties of Some Marble Types: A Comprehensive Study of Experimental and XCOM Results.

In this work, some marble types were collected from Egypt, and their shielding characteristics were estimated. Their rigidity, in addition to their elegant shape, led us to consider their use as a protective shield, in addition to making the workplace more beautiful. The mass attenuation coefficient (/) was calculated for three types of marble (Breshia, Galala, and Trista) experimentally, using a narrow gamma ray source and high pure germanium (HPGe).

Exogenous Applications of Bio-fabricated Silver Nanoparticles to Improve Biochemical, Antioxidant, Fatty Acid and Secondary Metabolite Contents of Sunflower.

The present study involved the bio-fabrication of silver nanoparticles (AgNPs) by using the L. leaves aqueous extract to improve the production of secondary metabolites in industrially important sunflower ( L.) plants.

Radiology Community Attitude in Saudi Arabia about the Applications of Artificial Intelligence in Radiology.

Unlabelled: Artificial intelligence (AI) is a broad, umbrella term that encompasses the theory and development of computer systems able to perform tasks normally requiring human intelligence. The aim of this study is to assess the radiology community's attitude in Saudi Arabia toward the applications of AI.

Methods: Data for this study were collected using electronic questionnaires in 2019 and 2020.

New promising high yielding cotton Bt-Variety RH-647 adapted for specific agro-climatic zone.

The Bt-cotton RH-647 was developed by Cotton Research Institute CRI, Khanpur has been acknowledged for its possesses superior plant characteristics and potential to yield out under harsh agro-climatic conditions of cotton productive district of Rahimyar Khan in Bahawalpur Division and southern Punjab in 2016. RH- 647 for its novel plant structure and improved fiber quality heat and drought tolerant to withstand successfully sustain yield out in harsh, highly variable hot and dry climatic conditions of and harsh seasoned. RH-647 was developed through one-way hybridization of elite parental genotypes accompanied by pedigree selection method through gene pyramiding technique for incorporation of excellent combinations of fiber traits and CLCuV disease tolerance with higher yield potential right from F1 population.

Evaluation of uptake of eight metals by Sorghum bicolor grown in arable soil combined with sewage sludge based on prediction models.

Prediction models were developed to estimate the extent to which aluminium, chromium, copper, iron, manganese, nickel, lead, and zinc were absorbed in the grains, leaves, stems, and roots of Sorghum bicolor cultivated in soil with various amendment rate of sewage sludge (0, 10, 20, 30, 40, and 50 g/kg) under greenhouse conditions. It was found that, aside from lead, all the examined metals occurred in significantly higher content in the roots compared to aerial tissues. Furthermore, the r-values were significantly negative between the bioconcentration factors of all metals, apart from aluminium and lead, and soil pH, whereas they were significantly positive between the bioconcentration factors, apart from lead, and soil organic matter content (OM).

Investigation of Mechanical and Physical Properties of Big Sheep Horn as an Alternative Biomaterial for Structural Applications.

This paper investigates the physical and mechanical properties of bighorns of Deccani breed sheep native from Karnataka, India. The exhaustive work comprises two cases. First, rehydrated (wet) and ambient (dry) conditions, and second, the horn coupons were selected for longitudinal and lateral (transverse) directions.

Amplicon and Metagenomic Analysis of Middle East Respiratory Syndrome (MERS) Coronavirus and the Microbiome in Patients with Severe MERS.

Middle East respiratory syndrome coronavirus (MERS-CoV) is a zoonotic infection that emerged in the Middle East in 2012. Symptoms range from mild to severe and include both respiratory and gastrointestinal illnesses. The virus is mainly present in camel populations with occasional zoonotic spill over into humans.

Synthesis and Characterization of Mechanical Properties and Wire Cut EDM Process Parameters Analysis in AZ61 Magnesium Alloy + BC + SiC.

Wire Cut Electric Discharge Machining (WCEDM) is a novel method for machining different materials with application of electrical energy by the movement of wire electrode. For this work, an AZ61 magnesium alloy with reinforcement of boron carbide and silicon carbide in different percentage levels was used and a plate was formed through stir casting technique. The process parameters of the stir casting process are namely reinforcement %, stirring speed, time of stirring, and process temperature.

Detection and analysis of photo-acoustic emission in Direct Laser Interference Patterning.

Functional laser texturing by means of Direct Laser Interference Patterning is one of the most efficient approaches to fabricate well-defined micro textures which mimic natural surfaces, such as the lotus effect for self-cleaning properties or shark skin for reduced friction. While numerous technical and theoretical improvements have been demonstrated, strategies for process monitoring are yet to be implemented in DLIP, for instance aiming to treat complex and non-plane surfaces. Over the last 35 years, it has been shown that the sound pressure generated by a laser beam hitting a surface and producing ablation can be detected and analysed using simple and commercially available transducers and microphones.

Exogenous melatonin-mediated regulation of K /Na transport, H -ATPase activity and enzymatic antioxidative defence operate through endogenous hydrogen sulphide signalling in NaCl-stressed tomato seedling roots.

Melatonin (Mel) and hydrogen sulphide (H S) have emerged as potential regulators of plant metabolism during abiotic stress. Presence of excess NaCl in the soil is one of the main causes of reduced crop productivity worldwide. The present investigation examines the role of exogenous Mel and endogenous H S in tomato seedlings grown under NaCl stress.

Ecological impact on development of hemipterous bug ( (hemiptera: pyrrhocoridae) and boll rot disease of cotton () grown in the diversified field.

The experiment was conducted at Cotton Research Station, Multan to study the impact of weather factors and Hemipterous bug on development of cotton boll disease in cotton variety bt- 886 for three consecutive years i.e., 2012, 2013 and 2014.

Application of bio-fertilizers for enhancing growth and yield of common bean plants grown under water stress conditions.

This study was planned to enhance the growth and productivity of common bean plants ( L.) grown under different water stress level by using different microorganisms as bio-fertilizer agents. Water stress is a international problem that effects on morphological, functional and chemical processes of plants occasioning in altering growth, yield and water relations of economic plants like common bean plants.

Integration of Radiometric Ground-Based Data and High-Resolution QuickBird Imagery with Multivariate Modeling to Estimate Maize Traits in the Nile Delta of Egypt.

In site-specific management, rapid and accurate identification of crop stress at a large scale is critical. Radiometric ground-based data and satellite imaging with advanced spatial and spectral resolution allow for a deeper understanding of crop stress and the level of stress in a given area. This research aimed to assess the potential of radiometric ground-based data and high-resolution QuickBird satellite imagery to determine the leaf area index (LAI), biomass fresh weight (BFW) and chlorophyll meter (Chlm) of maize across well-irrigated, water stress and salinity stress areas in the Nile Delta of Egypt.

Smart Health System to Detect Dementia Disorders Using Virtual Reality.

Smart health technology includes physical sensors, intelligent sensors, and output advice to help monitor patients' health and adjust their behavior. Virtual reality (VR) plays an increasingly larger role to improve health outcomes, being used in a variety of medical specialties including robotic surgery, diagnosis of some difficult diseases, and virtual reality pain distraction for severe burn patients. Smart VR health technology acts as a decision support system in the diseases diagnostic test of patients as they perform real world tasks in virtual reality (e.

Hydrogen sulfide (HS) and potassium (K) synergistically induce drought stress tolerance through regulation of H-ATPase activity, sugar metabolism, and antioxidative defense in tomato seedlings.

Exogenous potassium (K) and endogenous hydrogen sulfide (HS) synergistically alleviate drought stress through regulating H-ATPase activity, sugar metabolism and redox homoeostasis in tomato seedlings. Present work evaluates the role of K in the regulation of endogenous HS signaling in modulating the tolerance of tomato (Solanum lycopersicum L. Mill.

Enhancement of resistance by poultry manure and plant hormones (salicylic acid & citric acid) against tobacco mosaic virus.

Virus is the most menacing factor for plant, which causes enormous economic losses in agriculture worldwide. Tobacco mosaic virus is most hazardous virus among the plants that can spread through biological and non-biological sources. TMV is ancient virus that causes huge economic losses to pepper cucumber ornamental crops and tobacco.

Chromium accumulation in soil, water and forage samples in automobile emission area.

Environmental contamination caused by various pollutants due to automobile emissions is an alarming issue. One important type of the pollutants are heavy metals, including chromium (Cr) added by the exhaust of toxic smoke of vehicles. These pollutants are added to forage crops cultivated near roadsides, soil and irrigation water.

Heavy metals uptake by the global economic crop (Pisum sativum L.) grown in contaminated soils and its associated health risks.

The aim of the present investigation was to determine the concentration of heavy metals in the different organs of Pisum sativum L. (garden pea) grown in contaminated soils in comparison to nonpolluted soils in the South Cairo and Giza provinces, Egypt, and their effect on consumers' health. To collect soil and plant samples from two nonpolluted and two polluted farms, five quadrats, each of 1 m2, were collected per each farm and used for growth measurement and chemical analysis.

Influence of the Fly Ash Material Inoculants on the Tensile and Impact Characteristics of the Aluminum AA 5083/7.5SiC Composites.

The choice of suitable inoculants in the grain refinement process and subsequent enhancement of the characteristics of the composites developed is an important materials research topic, having wide scope. In this regard, the present work is aimed at finding the appropriate composition and size of fly ash as inoculants for grain refinement of the aluminum AA 5083 composites. Fly ash particles, which are by products of the combustion process in thermal power plants, contributing to the large-scale pollution and landfills can be effectively utilized as inoculants and interatomic lubricants in the composite matrix-reinforcement subspaces synthesized in the inert atmosphere using ultrasonic assisted stir casting setup.

Fungal biodegradation and removal of cyanobacteria and microcystins: potential applications and research needs.

Harmful cyanobacterial blooms (HCB) have severe impacts on marine and freshwater systems worldwide. They cause oxygen depletion and produce potent cyanotoxins that have detrimental effects on human and environmental health and deteriorate the water quality. Biological treatment of the water for control of cyanobacterial blooms and removal of cyanotoxins can be a more economical and environment-friendly way, as they do not result in production of undesirable by-products.

Ocular transmission and manifestation for coronavirus disease: a systematic review.

Background: There is currently a lack of information regarding ocular tropism and the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). Globally, the cumulative number of coronavirus disease 2019 (COVID-19) cases is increasing daily. Thus the potential for ocular transmission and manifestations of SARS-CoV-2 requires more investigation.

Influence of ecological and edaphic factors on biodiversity of soil nematodes.

Nematodes are the most diverse and highly significant group of soil-inhabiting microorganisms that play a vital role in organic material decomposition and nutrient recycling. Diverse geographical locations and environmental gradients show a significant impact on the diversity of nematodes. Present study aims to assess the effects of ecological (altitude, temperature, moisture) and edaphic (soil pH, nutrients, soil patches) factors on the soil nematode diversity and structure at five different landscape patches (forests, apple orchards, rice fields, pastures, and alpine zone) from ten different sites of Kashmir valley (India).

Foliar architecture and physio-biochemical plasticity determines survival of Typha domingensis pers. Ecotypes in nickel and salt affected soil.

Six ecotypes of Typha domingensis Pers. Jahlar (E), Sheikhupura (E), Sahianwala (E), Gatwala (E), Treemu (E) and Knotti (E) from different ecological regions were collected to evaluate the leaf anatomical and biochemical attributes under different levels of salinity and nickel stress viz; L (control), L (100 mM + 50 mg kg), L (200 mM + 100 mg kg) and L (300 mM + 150 mg kg). Presence of salt and Ni in rooting medium consistently affected growth, anatomical and physio-biochemical attributes in all Typha ecotypes.