Nanostructure of Porous Si and Anodic SiO Surface Passivation for Improved Efficiency Porous Si Solar Cells.

The photovoltaic effect in the anodic formation of silicon dioxide (SiO) on porous silicon (PS) surfaces was investigated toward developing a potential passivation technique to achieve high efficiency nanostructured Si solar cells. The PS layers were prepared by electrochemical anodization in hydrofluoric acid (HF) containing electrolyte. An anodic SiO layer was formed on the PS surface via a bottom-up anodization mechanism in HCl/HO solution at room temperature.

Nanoscale investigation of a radial p-n junction in self-catalyzed GaAs nanowires grown on Si (111).

One obstacle for the development of nanowire (NW) solar cells is the challenge to assess and control their nanoscale electrical properties. In this work a top-cell made of p-n GaAs core/shell NWs grown on a Si(111) substrate by Molecular Beam Epitaxy (MBE) is investigated by high resolution charge collection microscopy. Electron Beam Induced Current (EBIC) analyses of single NWs have validated the formation of a homogeneous radial p-n junction over the entire length of the NWs.

Combined front and back diffraction gratings for broad band light trapping in thin film solar cell.

In this paper, we present the integration of combined front and back 1D and 2D diffraction gratings with different periods, within thin film photovoltaic solar cells based on crystalline silicon layers. The grating structures have been designed considering both the need for incident light absorption enhancement and the technological feasibility. Long wavelength absorption is increased thanks to the long period (750 nm) back grating, while the incident light reflection is reduced by using a short period (250 nm) front grating.

Design, fabrication and optical characterization of photonic crystal assisted thin film monocrystalline-silicon solar cells.

In this paper, we present the integration of an absorbing photonic crystal within a monocrystalline silicon thin film photovoltaic stack fabricated without epitaxy. Finite difference time domain optical simulations are performed in order to design one- and two-dimensional photonic crystals to assist crystalline silicon solar cells. The simulations show that the 1D and 2D patterned solar cell stacks would have an increased integrated absorption in the crystalline silicon layer would increase of respectively 38% and 50%, when compared to a similar but unpatterned stack, in the whole wavelength range between 300 nm and 1100 nm.

Absorbing one-dimensional planar photonic crystal for amorphous silicon solar cell.

We report on the absorption of a 100nm thick hydrogenated amorphous silicon layer patterned as a planar photonic crystal (PPC), using laser holography and reactive ion etching. Compared to an unpatterned layer, electromagnetic simulation and optical measurements both show a 50% increase of the absorption over the 0.38-0.

Absorption enhancement using photonic crystals for silicon thin film solar cells.

We propose a design that increases significantly the absorption of a thin layer of absorbing material such as amorphous silicon. This is achieved by patterning a one-dimensional photonic crystal (1DPC) in this layer. Indeed, by coupling the incident light into slow Bloch modes of the 1DPC, we can control the photon lifetime and then, enhance the absorption integrated over the whole solar spectrum.