MnCoO Nanostructure Anchored on Functionalized Carbon Black for the Enhanced Bifunctional Electrocatalytic Performance of OER and HER.

The electrocatalytic oxygen and hydrogen evolution reactions (OER and HER) are key processes used in energy storage and conversion. We have developed a highly efficient MnCoO nanostructure anchored with functionalized carbon black (MnCoO/f-CB), which has been characterized by XRD, FT-IR, Raman spectra, FE-SEM, and HR-TEM analyses as robust bifunctional electrocatalysts for both HER and OER. At a characteristic 10 mA cm current density, the MnCoO/f-CB composite ECs exhibit low overpotentials of 330 mV for OER and 360 mV for HER, respectively.

Fabrication of MnSnO intercalated TA-rGO modified sensor for selective electrochemical detection of chloramphenicol in real samples.

Chloramphenicol (CAP), a potent antibiotic capable of inhibiting protein synthesis, presents significant challenges related to long-term dosing and its persistent leaching into the environment, raising concerns about environmental contamination and resistance development. To address this issue, we developed a reliable, low-cost, and biocompatible nanocomposite material comprising tannic acid (TA)-reduced graphene oxide (rGO) intercalated into manganese-doped tin oxide nanoparticles (MnSnO₂ NPs). The structural formation and catalytic activity of the MnSnO₂ NPs/TA-rGO nanocomposite were characterized using field emission-scanning electron microscopy (FE-SEM), high-resolution transmission electron microscopy (HR-TEM), X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), and electrochemical techniques.

Development of tungsten trioxide nano-flakes intercalated on tannic acid-functionalized reduced graphene oxide for flexible acebutolol sensors.

Acebutolol (ACE) is commonly used to treat hypertension and high blood pressure. Large doses of ACE can have adverse effects with potentially life-threatening consequences. It is, therefore, essential to develop a simple, low-cost, reliable, and reproducible device for detecting ACE in biofluids.

Eco-Friendly Poly (Butylene Adipate--Terephthalate) Coated Bi-Layered Films: An Approach to Enhance Mechanical and Barrier Properties.

In this research work, a coated paper was prepared with poly (butylene adipate-co-terephthalate) (PBAT) film to explore its use in eco-friendly food packaging. The paper was coated with PBAT film for packaging using hot pressing, a production method currently employed in the packaging industry. The coated papers were evaluated for their structural, mechanical, thermal, and barrier properties.

Electron Beam-Supported Fabrication of Biocompatible Silver/iota-Carrageenan for Wound Healing Application.

Silver nanoparticles (AgNPs) are a potent antibacterial agent, especially when used to treat bacteria that are multidrug resistant. However, it is challenging to eliminate the hazardous reducing agents that remain in AgNPs produced by the conventional chemical reduction process. To overcome these challenges, the presented research demonstrates the fabrication of AgNPs using iota-carrageenan (ι-carra) as a carbohydrate polymer using electron beam (EB) irradiation.

Improved electrochemical detection of levofloxacin in diverse aquatic samples using 3D flower-like Co@CaPO nanospheres.

The misuse of antibiotics has become a concerning environmental issue, posing a significant threat to public health. Levofloxacin (LFX), a fluoroquinolone antibiotic, is particularly worrisome due to its detrimental impact on human health and the ecosystem. Therefore, the selective and accurate identification of LFX is of utmost importance.

Effectively Reinforced α-BiO MPs/PDA-RGO Sensor for Selective Modality Sensing of a Hazardous Phenolic Compound.

The phenolic compound trichlorophenol (TCP) is an ingredient in fungicides and herbicides. This compound's high stability, bioaccumulation, toxicity, and poor biodegradability result in severe environmental and biological health issues. Consequently, it is crucial to have an affordable and sensitive method for detecting TCP in environmental samples.

Preparation and Antimicrobial Characterization of Poly(butylene adipate--terephthalate)/Kaolin Clay Biocomposites.

The biodegradable polymer poly(butylene adipate-co-terephthalate) (PBAT) starts decomposing at room temperature. Kaolin clay (KO) was dispersed and blended into PBAT composites using a solution-casting method. Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM) were used to evaluate the structure and morphology of the composite materials.

Preparation and Performance of Biodegradable Poly(butylene adipate--terephthalate) Composites Reinforced with Novel AgSnO Microparticles for Application in Food Packaging.

Biodegradable composites with antimicrobial properties were prepared with microparticles of silver stannate (AgSnO) and poly(butylene adipate-co-terephthalate) (PBAT) and tested for applications in food packaging. The PBAT matrix was synthesized and confirmed by H-nuclear magnetic resonance spectroscopy, Fourier transform infrared spectroscopy, and X-ray diffraction (XRD). Ultrasonic and coprecipitation methods were used to synthesize AgSnO.

Morphological, Mechanical, and Antimicrobial Properties of PBAT/Poly(methyl methacrylate--maleic anhydride)-SiO Composite Films for Food Packaging Applications.

A poly(methyl methacrylate--maleic anhydride) P(MMA--MA) copolymer was synthesized via radical polymerization. The synthesized P(MMA--MA) copolymer was identified by H- and C-nuclear magnetic resonance spectroscopy (H-NMR), (C-NMR), Fourier-transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The poly(butylene adipate--terephthalate) (PBAT)/P(MMA--MA)-SiO composites were developed using a solution-casting method.

Rational design of NdO decorated functionalized carbon nanofiber composite for selective electrochemical detection of carbendazim fungicides in vegetables, water, and soil samples.

Abuse of carbendazim (CBZ) leaves excessive pesticide residues on agricultural products, which endangers human health because of the residues' high concentrations. Hence, a composite consisting of functionalized carbon nanofibers (f-CNF) with neodymium oxide (NdO) was fabricated to monitor CBZ at trace levels. The NdO/f-CNF composite-modified electrode displays higher electro-oxidation ability towards CBZ than NdO and f-CNF-modified electrodes.

Novel Approach in Biodegradation of Synthetic Thermoplastic Polymers: An Overview.

Biodegradation is necessary for water-soluble or water-immiscible polymers because they eventually enter streams which can neither be recycled nor incinerated. It is important to consider the microbial degradation of natural and synthetic polymers in order to understand what is necessary for biodegradation and the mechanisms involved. Low/high-density polyethylene is a vital cause of environmental pollution.

Thermoplastic Starch Composites Reinforced with Functionalized POSS: Fabrication, Characterization, and Evolution of Mechanical, Thermal and Biological Activities.

Rapid advancements in materials that offer the appropriate mechanical strength, barrier, and antimicrobial activity for food packaging are still confronted with significant challenges. In this study, a modest, environmentally friendly method was used to synthesize functionalized octakis(3-chloropropyl)octasilsesquioxane [fn-POSS] nanofiller. Composite films compared to the neat thermoplastic starch (TS) film, show improved thermal and mechanical properties.

Iron doped activated carbon for effective removal of tartrazine and methylene blue dye from the aquatic systems: Kinetics, isotherms, thermodynamics and desorption studies.

In the current research work, the activated carbon synthesized from the plant species Delonix regia is doped with iron oxide nanoparticles and enforced as a nanosorbent for the effective extermination of Tartrazine (TAR) and Methylene blue (MB) dyes. This nanosorbent is prepared from the bark powder of the Delonix regia and subjected to chemical activation; Furthermore, the synthesized biosorbent were characterized using FTIR, SEM, TGA, and XRD to understand their functional properties and structural morphology. The optimum effectiveness adsorption of Tartrazine and Methylene blue has been investigated by using different key parameters.

A detailed review on advanced oxidation process in treatment of wastewater: Mechanism, challenges and future outlook.

The presence of several contaminants in waterbodies raises global pollution and creates major risks to mankind, wildlife, as well as other living organisms. Development of an effective, feasible, cost-effective and eco-friendly approach for treating wastewater that is discharged from various industries is important for bringing down the deposition of contaminants into environment. Advanced oxidation process is an efficient technique for treating wastewater owing to its advantages such as high oxidation efficacy and does not produce any secondary pollutants.

A recent advancement on the applications of nanomaterials in electrochemical sensors and biosensors.

Industrialization and globalization, both on an international and local scale, have caused large quantities of toxic chemicals to be released into the environment. Thus, developing an environmental pollutant sensor platform that is sensitive, reliable, and cost-effective is extremely important. In current years, considerable progress has been made in the expansion of electrochemical sensors and biosensors to monitor the environment using nanomaterials.

Impact of gadolinium oxide with functionalized carbon nanosphere: A portable advanced electrocatalyst for pesticide detection in aqueous environmental samples.

In this study, we developed a portable electrochemical sensor for realizing the pesticide residue in biological, environmental, and vegetable samples. A lower concentration of carbendazim pesticide (CBZ) was electrochemically exposed by newly developed gadolinium oxide/functionalized carbon nanosphere modified glassy carbon electrode (GdO/f-CNS/GCE). The GdO/f-CNS composite was prepared by two-pot ultrasonic-assisted co-precipitation method and characterized by various physicochemical analytical techniques.

Simultaneous electrochemical determination of nitrofurantoin and nifedipine with assistance of needle-shaped perovskite structure: barium stannate fabricated glassy carbon electrode.

A needle-shaped perovskite, barium stannate (BaSnO), was synthesized via a co-precipitation technique for the simultaneous electrochemical determination of antibiotic drug nitrofurantoin (NFTO) and pericardial drug nifedipine (NFP). The spectroscopic and microscopic result confirms that as-prepared BaSnO particles formed with desired crystalline nature, functional group, pore size, pore diameter, and fine needle-like morphology. The simultaneous electrochemical detection of the two pharmaceutical compounds was examined via cyclic voltammetry (CV) and differential pulse voltammetry (DPV) technique using BaSnO-modified glassy carbon electrode (BaSnO/GCE) at a potential range from +0.

Bismuth molybdate incorporated functionalized carbon nanofiber as an electrocatalytic tool for the pinpoint detection of organic pollutant in life samples.

Herein, we fabricated a feasible and accurate sensing platform for the quantification of toxic organic pollutant 2-nitroaniline (2-NA) in water samples through electrocatalyst made up of bismuth molybdate (BiMoO, BMO) functionalized carbon nanofiber (f-CNF) modified electrode. The preparation of BMO/f-CNF composite is of two methods, such as co-precipitation (C-BMO/f-CNF) and ultrasonication method (U-BMO/f-CNF). The physicochemical properties of the composites were characterized by XRD, FTIR, Raman, BET, FE-SEM, and HR-TEM techniques.