Diversity of short-term DC outcomes in bulk-fill RBCs subjected to a 3 s high-irradiance protocol.

Objectives: To determine the short-term (5 min) initial effects of a high-irradiance light-curing (LC) protocol on light transmission (LT%), radiant exposure (RE) and degree of conversion (DC%) of different bulk-fill resin-based composites (RBCs).

Materials And Methods: Six bulk-fill composites with different viscosities were investigated: OBF (One Bulk Fill, 3 M), EB (Estelite bulkfill,Tokuyama), PFill, PFlow, ECeram and EFlow (PowerFill, Poweflow, Tetric EvoCeram bulkfill, Tetric Evoflow bulkfill, Ivoclar), subjected to different LC protocols: one ultra-high-intensity (3 W/cm -3 s via PowerCure LCU) and two conventional (1.2 W/cm -10 s and 20 s via PowerCure and Elipar S10 LCUs).

Advanced restorative management of focal microdontia: A brief review and case report.

Focal microdontia is a dental anomaly characterized by the presence of a single abnormally small anterior or posterior tooth. The objective of this article is to provide an updated review of the literature on the advanced restorative management of focal microdontia, and to document a clinical case where the reviewed advanced restorative approaches were applied to treat a young adult presenting with a non-syndromic asymmetrical focal microdontia.We conducted a preliminary examination of the existing literature on the advanced restorative management of focal microdontia.

Mechanical properties and degree of conversion of resin-based core build-up materials and short fiber-reinforced flowable resin-based composite.

To evaluate the degree of conversion (DC), surface hardness (SH), and flexural strength (FS) of resin-based core build-up materials. Core build-up materials used were: MultiCore Flow (MCF); Activa (ACT); Core-X Flow (CXF); and everX flow (EVX), and DC, SH and FS were measured. An increase of DC was identified for all materials post-cure, except for EVX.

Biomechanical reinforcement by CAD-CAM materials affects stress distributions of posterior composite bridges: 3D finite element analysis.

Objectives: This 3D finite element analysis study aimed to investigate the effect of reinforcing CAD-CAM bars on stress distribution in various components of a posterior composite bridge.

Methods: A virtual model mimicking the absence of an upper second premolar was created, featuring class II cavity preparations on the proximal surfaces of the adjacent abutment teeth surrounding the edentulous space. Five distinct finite element analysis (FEA) models were generated, each representing a CAD-CAM reinforcing bar material: 3-YTZP (IPS.

A comprehensive review of resin luting agents: Bonding mechanisms and polymerisation reactions.

The field of dentistry is constantly evolving and increasingly embracing minimally invasive approaches. One such approach, which is bonding to the tooth structure, particularly enamel, has been shown to offer the most predictable outcomes. However, there are instances where significant tooth loss may limit treatment options for a restorative dentist.

Bond Strength, Microleakage, Microgaps, and Marginal Adaptation of Self-adhesive Resin Composites to Tooth Substrates with and without Preconditioning with Universal Adhesives.

Purpose: This study investigated and compared the bond strengths, microleakage, microgaps, and marginal adaptation of self-adhesive resin composites (SAC) to dentin with or without universal adhesives.

Materials And Methods: Dentin surfaces of 75 molars were prepared for shear and microtensile bond strength testing (SBS and µTBS). Silicon molds were used to build up direct restorations using the following materials to form 5 groups: 1.

Synthesis and characterisation of microcapsules for self-healing dental resin composites.

Aim: The purpose of this study was to i) synthesise TEGDMA-DHEPT microcapsules in a laboratory setting; ii) characterise the resultant microcapsules for quality measures.

Materials & Methods: Microcapsules were prepared by in situ polymerization of PUF shells. Microcapsules characterisation include size analysis, optical and SEM microscopy to measure the diameter and analyse the morphology of PUF microcapsules.

Gelatin-Chitosan Hydrogel Biological, Antimicrobial and Mechanical Properties for Dental Applications.

Unlabelled: Chitosan, a natural polysaccharide sourced from crustaceans and insects, is often used with hydrogels in wound care. Evaluating its cytotoxicity and antimicrobial properties is crucial for its potential use in dentistry.

Objective: To investigate the mechanical properties of gelatin hydrogels based on decaethylated chitosan and antimicrobial activity against and their biological effects with stem cells from apical papilla (SCAPs).

Temperature rise in photopolymerized adhesively-bonded resin composite: A thermography study.

Objectives: To assess visually and quantitatively the contributions of the adhesive layer photopolymerization and the subsequent resin composite increment to spatio-temporal maps of temperature at five different cavity locations, subjected to two irradiance curing protocols: standard and ultra-high.

Methods: Caries-free molars were used to obtain 40, 2 mm thick dentin slices, randomly assigned to groups (n = 5). These slices were incorporated within 3D-printed model cavites, 4 mm deep, restored with Adhese® Universal bonding agent and 2 mm thick Tetric® Powerfill resin composite, and photocured sequentially, as follows: G1: control-empty cavity; G2: adhesive layer; G3 composite layer with no adhesive; and G4 composite layer with adhesive.

Properties of model E-glass fiber composites with varying matrix monomer ratios.

Objective: To evaluate properties of fiber-reinforced-composites (FRC) containing Bis-EMA/UDMA monomers but identical dispersed phase (60% wt BaSi glass power +10% wt E-glass fibre).

Methods: A control (Group A), monomer mixture comprising 60% Bis-GMA, 30% TEGDMA, and 10% PMMA (typical FRC monomers) was used. The following monomer mass fractions were mixed: 50% bis-GMA plus 50% of different ratios of Bis-EMA+UDMA to produce consistent formulations (Groups B-E) of workable viscosities was also studied.

The Depth of Cure, Sorption and Solubility of Dual-Cured Bulk-Fill Restorative Materials.

This study aimed to examine depth of cure (DoC), mass change, water sorption and solubility of dual-cured bulk-fill restorative materials (Surfil One and Activa) in comparison with a light-cured bulk-fill composite (Filtek One Bulk-Fill) and a resin-modified glass ionomer (Fuji II LC). Twenty specimens were prepared of each material using stainless steel molds designed with a slot (8 × 4 × 2 mm) and irradiated for either 20 or 40 s. The Vickers hardness (VHN) was measured at every 0.

The effectiveness of dental water jet in reducing dental plaque and gingival bleeding in orthodontic patients: A systematic review and meta-analysis of randomized clinical trials.

Introduction: This systematic review and meta-analysis tests the effectiveness of dental water jet (DWJ) with manual toothbrushes (MTB) compared to MTB alone in oral health maintenance in orthodontic patients.

Methods: Four databases were systematically searched: PubMed, Scopus, Web of Science (WoS) and Cochrane Library until 6 January 2022 using a combination of medical subject heading (MeSH) terms and keywords. Randomized clinical trials (RCTs) were only included and critically appraised using the Cochrane Risk of Bias (ROB) tool.

Effect of Bleaching Agents on Discoloured Resin-Based Composites for Direct Restorations: A Systematic Review.

The purpose of the review was to assess the influence of office and home bleaching on the color durability after staining of resin-based composites (RCs) for direct restorations. A web-based search for possibly relevant scientific papers in the English language between January 2013 and August 2022 was conducted in the databases such as PubMed, Scopus, Cochrane Library, and EMBASE. In-vitro studies that explored the influence of in-office and other bleaching treatments on the discolored RC for direct restorations in extracted human teeth were included.

Effect of Fibres on Physico-Mechanical Properties of Bulk-Fill Resin Composites.

Objective: To measure the flexural strength (FS) of bulk-fill resin composites and assess their long-term water absorption and solubility properties with and without the inclusion of short glass fibres.

Methods: One resin composite, everX Flow with fibres, and four commercially available bulk-fill composites without fibres, namely, PALFIQUE, Activa, SDR Plus, and Filtek Bulk Fill One, were tested. Six specimens (2 × 2 × 25 mm) were fabricated for each material and stored in water for 1 day and 30 days to measure the flexural strength using a three-point bending test.

Fabrication of Novel Pre-Polymerized BisGMA/Silica Nanocomposites: Physio-Mechanical Considerations.

Resin composite mimics tooth tissues both in structure and properties, and thus, they can withstand high biting force and the harsh environmental conditions of the mouth. Various inorganic nano- and micro-fillers are commonly used to enhance these composites' properties. In this study, we adopted a novel approach by using pre-polymerized bisphenol A-glycidyl methacrylate (BisGMA) ground particles (XL-BisGMA) as fillers in a BisGMA/triethylene glycol dimethacrylate (TEGDMA) resin system in combination with SiO nanoparticles.

Injectable Flowable Resin-based Composite Veneers Prior to Ceramic Veneers.

Objectives: This case report describes the clinical protocols for using injectable flowable resin-based composite veneers without tooth reduction as long-term prototype restorations, followed by conservative feldspathic veneer restorations.

Clinical Consideration: The patient's primary concern was to improve her smile. After clinical evaluation, injectable flowable resin composite veneers were recommended as long-term prototypes followed by conservative tooth preparation and ceramic veneers.

Dental Fiber-Post Systems: An In-Depth Review of Their Evolution, Current Practice and Future Directions.

The field of dental medicine is constantly evolving and advancing toward minimally invasive techniques. Several studies have demonstrated that bonding to the tooth structure, particularly enamel, yields the most predictable results. In some instances, however, significant tooth loss, pulpal necrosis, or irreversible pulpitis may limit the options available to the restorative dentist.

Surface hardness and flexural strength of dual-cured bulk-fill restorative materials after solvent storage.

Background: This study aimed to evaluate the surface hardness (VHN) and biaxial flexural strength (BFS) of dual-cured bulk-fill restorative materials after solvent storage.

Methods: Two dual-cured bulk-fill composites (Surefil One® and Activa™ Bioactive), a light-cured bulk-fill composite (Filtek One Bulk-Fill) and a resin-modified glass ionomer (Fuji II LC) were investigated. Surefil One and Activa were used in the dual-cure mode, all materials were handled according to manufacturer's instructions.

Surface properties and Streptococcus mutans biofilm adhesion of ion-releasing resin-based composite materials.

Objective: To evaluate the adhesion of Streptococcus mutans (S. mutans) and related surface properties of ion-releasing resin-based composite (RBC) restorative materials.

Methods: Two ion-releasing RBCs, Activa (ACT) and Cention-N (CN), were compared to a conventional RBC (Z350) and a resin-modified glass ionomer cement (Fuji-II-LC).

Flowable Bulk-Fill Composite: Physico-Mechanical Assessment.

(1) Background: A newer class of bulk-fill resin-based composite (BF-RBC) materials requires no capping layer (Palfique Bulk flow, PaBF, Tokuyama Dental, Tokyo, Japan). The objective of this study was to assess the flexural strength, microhardness, surface roughness, and color stability of PaBF compared to two BF-RBCs with different consistencies. (2) Methods: PaBF, SDR Flow composite (SDRf: Charlotte, NC, USA) and One Bulk fill (OneBF: 3M, St.

Endoscopic Assessment Prior to Bariatric Surgery in Saudi Arabia.

Background: There are marked local inconsistencies in the Arabian Peninsula about the role of preoperative esophagogastroduodenoscopy (EGD) in bariatric surgery. Thus, this study was conducted to determine the frequency of endoscopic and histological findings in the Saudi population presenting for pre-bariatric surgery evaluation.

Material And Methods: This was a retrospective study that included all the patients who were evaluated by EGD at Dammam Medical Complex, Dammam, Saudi Arabia, between 2018 and 2021 as a part of their pre-bariatric-surgery evaluation.

Influence of Eugenol and Its Novel Methacrylated Derivative on the Polymerization Degree of Resin-Based Composites.

The aim of this work was to assess the limiting rate of eugenol (Eg) and eugenyl-glycidyl methacrylate (EgGMA) at which the ideal degree of conversion (DC) of resin composites is achieved. For this, two series of experimental composites, containing, besides reinforcing silica and a photo-initiator system, either EgGMA or Eg molecules at 0-6.8 wt% per resin matrix, principally consisting of urethane dimethacrylate (50 wt% per composite), were prepared and denoted as UGx and UEx, where x refers to the EgGMA or Eg wt% in the composite, respectively.

Biomimetic Whitening Effect of Polyphosphate-Bleaching Agents on Dental Enamel.

This in vitro study investigated the extrinsic tooth-whitening effect of bleaching products containing polyphosphates on the dental enamel surface compared to 10% carbamide peroxide (CP). Eighty human molars were randomly allocated into four whitening-products groups. Group A (control) was treated with 10% CP (Opalescence).

Effectiveness of Different Polishing Kits for Chairside CAD/CAM Provisional Restorative Materials.

Objective: To investigate the efficacy of three specially designed polishing kits for provisional restorations made from three chairside computer-aided design and computer-aided manufacturing (CAD/CAM) provisional resin blocks.

Method: Ninety-six chairside CAD/CAM provisional restorations were milled out of three chairside CAD/CAM provisional resin blocks: (1) ArtBloc Temp (Merz Dental); (2) Telio CAD (Ivoclar Vivadent); and (3) Vita CAD-Temp (VITA Zahnfabrik). The provisional restorations for each material were allocated into the following groups: (1) milled restorations (no polish); (2) polished with CADMaster CAD/CAM Adjustment & Polishing Kit (CM, Shofu); (3) polished with KUT Ultimate Bisacryl (Temporaries) Polishing Kit (KU, Dental Savings Club); and (4) polished with K0330 PMMA Adjusting, Finishing & Polishing (KP, Brasseler USA).