Monitoring method for uranium concentration and chemical form in the droplet of rat serum.

A simple monitoring method has been proposed by measuring uranium (U) concentration and its chemical form in serum. The droplet of the 1 µL rat serum specimen was then examined by subjecting it to high energy synchrotron radiation X-ray fluorescence spectroscopy (SR-XRF) and X-ray absorption fine structure (XAFS) to determine the concentration and chemical form of U. The detection limit of U in 1 µL droplet was calculated to be 0.

Uranium chelating ability of decorporation agents in serum evaluated by X-ray absorption spectroscopy.

Internal exposure to actinides such as uranium and plutonium has been reduced using chelating agents for decorporation because of their potential to induce both radiological and chemical toxicities. This study measures uranium chemical forms in serum in the presence and absence of chelating agents based on X-ray absorption spectroscopy (XAS). The chelating agents used were 1-hydroxyethane 1,1-bisphosphonate (EHBP), inositol hexaphosphate (IP6), deferoxamine B (DFO), and diethylenetriaminepentaacetate (DTPA).

Wet chemical processing for nuclear waste glass to retrieve radionuclides.

Here, we show unexpected and significant elution behavior of various elements from simulated nuclear waste glass (NWG) in ∼10° mol dm acidic solutions below 100 °C, where a borosilicate-based glass matrix has been believed to be chemically durable. Most elements like glass main components (Li, B, Na, Ca, Al, and Zn, but except for Si) and simulated radionuclides (Rb, Cs, Sr, Ba, Se, Te, Mn, Pd, Mo, rare earths, Cr, Fe, and Ni) were remarkably eluted from the simulated NWG in ∼10° M HNO aq with Cl at 90 °C. Especially, the elution of Pd is governed by its coordination chemistry including a redox reaction, because Pd(0) present in the simulated NWG has to be oxidized to Pd which forms [PdCl] for its dissolution.

Electrochemical Insight into the Brust-Schiffrin Synthesis of Au Nanoparticles.

The mechanism of the Brust-Schiffrin gold nanoparticle synthesis has been investigated through the use of ion transfer voltammetry at the water/1,2-dichloroethane (DCE) solution interface, combined with X-ray absorption fine structure (XAFS) of the reaction between [AuCl4](-) and thiol (RSH) in homogeneous toluene (TL) solution. Ion transfer calculations indicate the formation of [AuCl2](-) at RSH/Au ratios from 0.2-2 with a time-dependent variation observed over several days.

Metal deposition at the liquid-liquid interface.

Metal nanoparticles are readily formed, with a reasonable degree of size and shape control, using solution-based reduction methods under ambient conditions. Despite the large number of reports in this field, much of our knowledge of nanoparticle growth is largely empirical, with the relationship between particle form and growth conditions, for example, still not well understood. Many nanoparticle preparation routes actually depend on not one, but two, solution phases, i.

Mass-dependent and mass-independent isotope effects of zinc in a redox reaction.

We report the isotope fractionation of zinc (Zn) associated with a redox reaction between Zn(0) and Zn(II). Zn isotopes were found fractionated in pyrometallurgical biphase extraction between liquid zinc and molten chloride. The isotopic composition of Zn in the molten chloride phase was analyzed by multiple collector inductively coupled plasma mass spectrometry and reported as (m)Zn/64Zn (m = 66, 67, and 68) ratios.

Flexible and extendible neural stimulation/recording device based on cooperative multi-chip CMOS LSI architecture.

An LSI-based cooperative multi-chip neural stimulation/recording device is proposed and fabricated. The proposed multi-chip device consists of small (600 microm x 600 microm in the present design) intelligent neural stimulation/recording chips (unit chip). The unit chip has a neural stimulation/recording electrode array and individual control circuit.

The development of a multichannel electrode array for retinal prostheses.

The development of a multielectrode array is the key issue for retinal prostheses. We developed a 10 x 10 platinum electrode array that consists of an 8-microm polyimide layer sandwiched between 5-microm polymonochloro-para-xylylene (parylene-C) layers. Each electrode was formed as a 30-microm-high bump by Pt/Au double-layer electroplating.