Effect of aluminum (Al3+) on granulation in upflow anaerobic sludge blanket reactor treating low-strength synthetic wastewater.

The effect of aluminum on agglomeration in the sludge bed and chemical oxygen demand (COD) removal efficiency in laboratory-scale upflow anaerobic sludge blanket (UASB) reactors treating low-strength synthetic wastewater (approximately 665 to 738 mg/L of COD) was investigated. Continuous application of aluminum chloride (200 mg/L) caused poor COD removal, less sludge density, and adversely affected agglomeration in the sludge bed. An adverse effect on granulation also was observed when 300 mg/L aluminum chloride was added only during the startup, and the effect continued even after it was discontinued.

Assessment of methods for collecting fallout brake pad wear debris for environmental analysis.

Three methods for collecting or generating fallout brake pad wear debris for environmental analysis were assessed: collection from wheels or hubs of automobiles (natural), generation from an inexpensive sanding process (sanded), and collection of fallout debris from dynamometer tests using the Los Angeles City Traffic protocol (LACT). Brake wear debris was collected from four automobiles with semimetalic brake pads and analyzed for physicochemical properties. For automobiles where all three types of debris were collected, bulk copper mass fractions ranged from 22-23% in sanded particles and 24-27% in LACTparticles, but were reduced to 1-6% in natural debris.