Upcycling Textile Waste into Anionic and Cationic Cellulose Nanofibrils and Their Assembly into 2D and 3D Materials.

Extracting high-performance nanomaterials from waste presents a promising avenue for valorization. This study presents two methods for extracting cellulose nanofibrils (CNFs) from discarded textiles. Post-consumer cotton fabrics are chemically treated through either cationization with (2,3-epoxypropyl)trimethylammonium chloride or TEMPO/NaBr-catalyzed oxidation, followed by fibrillation to produce Cat-CNFs and TO-CNFs, respectively.

Calcium Cross-Linked Cellulose Nanofibrils: Hydrogel Design for Local and Controlled Nitric Oxide Release.

Nitric oxide (NO) holds promise for wound healing due to its antimicrobial properties and role in promoting vasodilation and tissue regeneration. The local delivery of NO to target cells or organs offers significant potential in numerous biomedical applications, especially when NO donors are integrated into nontoxic viscous matrices. This study presents the development of robust cellulose nanofibril (CNF) hydrogels designed to control the release of nitric oxide (NO) generated from a NO-donor molecule (-nitrosoglutathione, GSNO) obtained from the nitrosation of its precursor molecule glutathione (GSH).

Fully bio-based water-resistant wood coatings derived from tree bark.

Surface protection is essential when using wood as a construction material. However, the industry lacks sustainable alternatives to replace the presently dominant fossil-based synthetic water-resistant coatings. Here, we show a fully bio-based wood surface protection system using components sourced from birch bark and spruce bark, inspired by the natural barrier function of bark in trees.

Prioritization, Identification, and Quantification of Emerging Contaminants in Recycled Textiles Using Non-Targeted and Suspect Screening Workflows by LC-ESI-HRMS.

Recycled textiles are becoming widely available to consumers as manufacturers adopt circular economy principles to reduce the negative impact of garment production. Still, the quality of the source material directly impacts the final product, where the presence of harmful chemicals is of utmost concern. Here, we develop a risk-based suspect and non-targeted screening workflow for the detection, identification, and prioritization of the chemicals present in consumer-based recycled textile products after manufacture and transport.

The influence of drying routes on the properties of anisotropic all-cellulose composite foams from post-consumer cotton clothing.

Biopolymer-based functional materials are essential for reducing the carbon footprint and providing high-quality lightweight materials suitable for packaging and thermal insulation. Here, cellulose nanocrystals (CNCs) were efficiently upcycled from post-consumer cotton clothing by TEMPO-mediated oxidation and HCl hydrolysis with a yield of 62% and combined with wood cellulose nanofibrils (CNFs) to produce anisotropic foams by unidirectional freeze-casting followed by freeze drying (FD) or supercritical-drying (SCD). Unidirectional freeze-casting resulted in foams with aligned macropores irrespective of the drying method, but the particle packing in the foam wall was significantly affected by how the ice was removed.

Nanocellulose-Bovine Serum Albumin Interactions in an Aqueous Medium: Investigations Using In Situ Nanocolloidal Probe Microscopy and Reactive Molecular Dynamics Simulations.

As a versatile nanomaterial derived from renewable sources, nanocellulose has attracted considerable attention for its potential applications in various sectors, especially those focused on water treatment and remediation. Here, we have combined atomic force microscopy (AFM) and reactive molecular dynamics (RMD) simulations to characterize the interactions between cellulose nanofibers modified with carboxylate or phosphate groups and the protein foulant model bovine serum albumin (BSA) at pH 3.92, which is close to the isoelectric point of BSA.

Anisotropic foams derived from textile-based cellulose nanocrystals and xanthan gum.

The upcycling of discarded garments can help to mitigate the environmental impact of the textile industry. Here, we fabricated hybrid anisotropic foams having cellulose nanocrystals (CNCs), which were isolated from discarded cotton textiles and had varied surface chemistries as structural components, in combination with xanthan gum (XG) as a physical crosslinker of the dispersion used for foam preparation. All CNCs had crystallinity indices above 85 %, zeta potential values below -40 mV at 1 mM NaCl, and true densities ranging from 1.

Introduction to Bionanocomposites.

Sabu Thomas, Maya John and Aji Mathew introduce the themed issue on Bionanocomposites.

Three-Dimensional Printing of Cellulose/Covalent Organic Frameworks (CelloCOFs) for CO Adsorption and Water Treatment.

The development of porous organic polymers, specifically covalent organic frameworks (COFs), has facilitated the advancement of numerous applications. Nevertheless, the limited availability of COFs solely in powder form imposes constraints on their potential applications. Furthermore, it is worth noting that COFs tend to undergo aggregation, leading to a decrease in the number of active sites available within the material.

modified nanocellulose/alginate hydrogel composite beads for purifying mining effluents.

Biobased adsorbents and membranes offer advantages related to resource efficiency, safety, and fast kinetics but have challenges related to their reusability and water flux. Nanocellulose/alginate composite hydrogel beads were successfully prepared with a diameter of about 3-4 mm and porosity as high as 99%. The beads were further modified with TEMPO-mediated oxidation to functionalize the hydroxyl groups of cellulose and facilitate the removal of cationic pollutants from aqueous samples at low pressure, driven by electrostatic interactions.

3D printing of cellulose/leaf-like zeolitic imidazolate frameworks (CelloZIF-L) for adsorption of carbon dioxide (CO) and heavy metal ions.

Metal-organic frameworks (MOFs) have advanced several technologies. However, it is difficult to market MOFs without processing them into a commercialized structure, causing an unnecessary delay in the material's use. Herein, three-dimensional (3D) printing of cellulose/leaf-like zeolitic imidazolate frameworks (ZIF-L), denoted as CelloZIF-L, is reported direct ink writing (DIW, robocasting).

Effect of decoration route on the nanomechanical, adhesive, and force response of nanocelluloses-An in situ force spectroscopy study.

Although cellulose derivatives are widely applied in high-tech materials, the relation between their force responses and their surface chemical properties in a biological environment as a function of pH is unknown. Here, interaction forces of surface modified cellulose nanocrystals (CNCs), lignin residual cellulose nanocrystals (LCNCs), and 2,2,6,6-tetramethylpiperidine-1-oxyl radical (TEMPO)-oxidized cellulose nanofibres (TCNFs) with OSO3-, COO- and lignin chemical groups were measured using in situ peak force quantitative nanomechanical mapping and force spectroscopy in salt solution at two pH values. We found that the forces acting between the tip and CNC or LCNC are steric dominated showing long range and slow decay as a result of their low surface charge density.

The Design of 3D-Printed Polylactic Acid-Bioglass Composite Scaffold: A Potential Implant Material for Bone Tissue Engineering.

Bio-based and patient-specific three-dimensional (3D) scaffolds can present next generation strategies for bone tissue engineering (BTE) to treat critical bone size defects. In the present study, a composite filament of poly lactic acid (PLA) and 45S5 bioglass (BG) were used to 3D print scaffolds intended for bone tissue regeneration. The thermally induced phase separation (TIPS) technique was used to produce composite spheres that were extruded into a continuous filament to 3D print a variety of composite scaffolds.

Plant biomechanics and resilience to environmental changes are controlled by specific lignin chemistries in each vascular cell type and morphotype.

The biopolymer lignin is deposited in the cell walls of vascular cells and is essential for long-distance water conduction and structural support in plants. Different vascular cell types contain distinct and conserved lignin chemistries, each with specific aromatic and aliphatic substitutions. Yet, the biological role of this conserved and specific lignin chemistry in each cell type remains unclear.

Cellulose-Based Nanomaterials Advance Biomedicine: A Review.

There are various biomaterials, but none fulfills all requirements. Cellulose biopolymers have advanced biomedicine to satisfy high market demand and circumvent many ecological concerns. This review aims to present an overview of cellulose knowledge and technical biomedical applications such as antibacterial agents, antifouling, wound healing, drug delivery, tissue engineering, and bone regeneration.

3D-printed monolithic biofilters based on a polylactic acid (PLA) - hydroxyapatite (HAp) composite for heavy metal removal from an aqueous medium.

High flux, monolithic water purification filters based on polylactic acid (PLA) functionalised with fish scale extracted hydroxyapatite (HAp) were prepared by solvent-assisted blending and thermally induced phase separation (TIPS), followed by twin-screw extrusion into filaments and processed three-dimensional (3D) printing. The printed filters with consistent pore geometry and channel interconnectivity as well as homogenous distribution of HAp in the PLA matrix showed adsorption capabilities towards heavy metals cadmium (Cd) and lead (Pb) with maximum adsorption capacity of 112.1 mg g and 360.

A New Family of Renewable Thermosets: Kraft Lignin Poly-adipates.

Thermosetting polymeric materials have advantageous properties and are therefore used in numerous applications. In this study, it was hypothesized and ultimately shown that thermosets could be derived from comparably sustainable sub-components. A two-step procedure to produce a thermoset comprising of Kraft lignin (KL) and the cross-linker adipic acid (AdA) was developed.

Holistic Valorization of Hemp through Reductive Catalytic Fractionation.

Despite the increased use of hemp fiber, negligible attention has been given to upgrade the hemp hurd, which constitutes up to 70 wt % of the hemp stalk and is currently considered a low-value byproduct. In this work, valorization of hemp hurd was performed by reductive catalytic fractionation (RCF) in the presence of a metal catalyst. We found an unexpectedly high yield of monophenolic compounds (38.

In-situ growth of zeolitic imidazolate frameworks into a cellulosic filter paper for the reduction of 4-nitrophenol.

Whatman® cellulosic filter paper was used as a substrate for the synthesis of two zeolitic imidazolate frameworks (ZIFs); ZIF-8 and ZIF-67 with and without 2,2,6,6-tetramethyl-1-piperidine oxoammonium salt (TEMPO)-oxidized cellulose nanofibril (TOCNF). All synthesis procedures take place at room temperature via a one-pot procedure. The synthesis steps were followed using X-ray diffraction (XRD), scanning electron microscopy (SEM), and Fourier transforms infrared (FT-IR).

A Rare Case of Pediatric Central Venous Catheter-Related Bloodstream Infection With Kocuria Varians.

Cases of central line blood infections caused by spp. are limited in the literature. Most of those infections have been detected in hospitalized patients with severe underlying disease or those with implanted catheters or with suppressed immunity.

Water Filtration Membranes Based on Non-Woven Cellulose Fabrics: Effect of Nanopolysaccharide Coatings on Selective Particle Rejection, Antifouling, and Antibacterial Properties.

This article presents a comparative study of the surface characteristics and water purification performance of commercially available cellulose nonwoven fabrics modified, via cast coating, with different nano-dimensioned bio-based carbohydrate polymers, viz. cellulose nanocrystals (CNC), TEMPO-oxidized cellulose nanofibers (T-CNF), and chitin nanocrystals (ChNC). The surface-modified nonwoven fabrics showed an improvement in wettability, surface charge modification, and a slight decrease of maximum pore size.

All-cellulose functional membranes for water treatment: Adsorption of metal ions and catalytic decolorization of dyes.

In this study, we present a facile, one-step method for the manufacturing of all-cellulose, layered membranes containing cellulose nanocrystals (CNC), TEMPO (2,2,6,6-tetramethylpiperidine-1-oxyl radical)-mediated oxidized cellulose nanofibers (TO-CNF), or zwitterionic polymer grafted cellulose nanocrystals (CNC-g-PCysMA) as functional entities in combination with cellulose fibers and commercial grade microfibrillated cellulose. The presence of active sites such as hydroxyl, carbonyl, thioethers, and amines, gave the membranes high adsorption capacities for the metal ions Au (III), Co (II), and Fe (III), as well as the cationic organic dye methylene blue (MB). Furthermore, the membranes served as excellent metal-free catalysts for the decolorization of dyes via hydrogenation.

Safety and Cost-Effectiveness of Interscalene Brachial Plexus Block With Sedation in Reverse Total Shoulder Replacement.

Aims To investigate the safety and cost-effectiveness of interscalene brachial plexus block/regional anaesthesia (ISB-RA) in patients undergoing reverse total shoulder replacement. Patients and methods This retrospective study included 15 patients with symptomatic rotator cuff arthropathy who underwent reverse total shoulder arthroplasty (rTSA) under ISB-RA without general anaesthesia in the beach chair position from 2010 to 2018. The mean patient age was 77 years (range 59-82 years).

Isolation and modification of nano-scale cellulose from organosolv-treated birch through the synergistic activity of LPMO and endoglucanases.

Nanocellulose isolation from lignocellulose is a tedious and expensive process with high energy and harsh chemical requirements, primarily due to the recalcitrance of the substrate, which otherwise would have been cost-effective due to its abundance. Replacing the chemical steps with biocatalytic processes offers opportunities to solve this bottleneck to a certain extent due to the enzymes substrate specificity and mild reaction chemistry. In this work, we demonstrate the isolation of sulphate-free nanocellulose from organosolv pretreated birch biomass using different glycosyl-hydrolases, along with accessory oxidative enzymes including a lytic polysaccharide monooxygenase (LPMO).

A Rare Cystic Fibrosis Transmembrane Conductance Regulator (CFTR) Mutation Associated With Typical Cystic Fibrosis in an Arab Child.

Cystic fibrosis (CF) is a progressive genetic disorder, inherited by the autosomal recessive mode of inheritance and more frequently seen in the Caucasian population with a carrier rate of 1:29 in Caucasian-Americans. Over 1800 cystic fibrosis transmembrane conductance regulator (CFTR) gene mutations have been identified so far and the delta F 508 del mutation is the most common mutation. Gene sequencing and deletion/duplication analysis can detect mutations in 99% of people with a clinical diagnosis of CF.