Genotype and phenotype correlations in diabetic patients in Uruguay.

To differentiate among different types of diabetes is becoming an increasingly challenging task. We investigated whether the patient's genetic profile is useful to identify the particular type of diabetes, to determine the corresponding hyperglycemia pathogenesis and treat accordingly. Three hundred and thirty-eight diabetic patients, diagnosed according to American Diabetes Association criteria, were recruited from 2004 to 2008 in diabetes health reference centers.

Comparative study of the sorption of clomipramine and viloxazine hydrochlorides in Stedim 6 and PVC bags.

The stability of two antidepressant drugs, clomipramine and viloxazine hydrochlorides, was studied as was their possible sorption on Stedim 6, a new multilayer polyethylene-lined film, which was considered comparatively to polyvinyl chloride (PVC) and glass surfaces. Appropriate amounts of the drugs were added to 500 ml of 5% dextrose and 0.9% sodium chloride solutions in Stedim 6 and PVC bags, and in glass flasks, in order to obtain the concentrations currently used in clinical practice.

Disposable devices for the dispensing of oral drops. Study of photoprotectiveness and compatibility.

Amber-coloured syringes designed for the distribution of unit-doses of oral drops were studied for the efficiency of the photoprotectiveness and the possible binding of eleven phenothiazine neuroleptics: alimemazine, chlorpromazine, cyamemazine, fluphenazine, levomepromazine, periciazine, pipotiazine, prochlorperazine, thioproperazine, thioridazine, and trifluoperazine, all very easily oxidized in solution in daylight. Spectrofluorimetry made it possible, in one operation, to determine the remaining concentrations of drugs after storage and to verify the absence of photo-oxidation. The storage was performed up to 13 days at 25 +/- 3 degrees C and without any precaution from daylight.

Stedim 6 and Clearflex, two new multilayer materials for infusion containers. Comparative study of their compatibility with five drugs versus glass flasks and polyvinyl chloride bags.

Stedim 6 and Clearflex, two new polyethylene-lined materials for infusion bags, were studied for their compatibility with disodium clodronate, chlorpromazine and maprotiline hydrochlorides, diazepam, and clorazepate dipotassium salt, comparatively with borosilicate glass flasks and polyvinyl chloride bags. Diazepam, the only drug to exhibit a marked sorption in PVC bags (the loss reached 25% of the initial concentration after a contact duration of 72 h), showed lower sorption in Stedim 6 bags (loss about 11% under the same conditions) and none in Clearflex bags. No significant difference was observed between the infusion solutions used as vehicles of the drugs (5% dextrose and 0.

Interactions between six psychotherapeutic drugs and plastic containers. Influence of plastic material and infusion solutions.

The interactions of chlorpromazine, clomipramine, maprotiline and viloxazine hydrochlorides, and of clorazepate dipotassium salt and diazepam with polyvinyl chloride (PVC) and Stedim 6 infusion bags were studied. Stedim 6, is anew multilayer film whose inner layer is made of polyethylene. The drugs were in 5% dextrose and 0.

Effects of temperature, solution composition, and type of container on the stability and absorption of carmustine.

The stability and absorption of carmustine were studied comparatively in glass flasks and Stedim 6 bags. Stedim 6 is a new, multilayer, polyethylene-lined film. When stored at room temperature (22 degrees C +/- 2 degrees C) in the dark, carmustine decomposed in 5% dextrose solution and more so in 0.

Sorption studies of dipotassium clorazepate salt (Tranxène) and midazolam hydrochloride (Hypnovel) in polyvinyl chloride and glass infusion containers.

The compatibilities of dipotassium clorazepate and midazolam hydrochloride with polyvinyl chloride (PVC) bags have been studied and compared with those observed with glass flasks. At room temperature, dipotassium clorazepate showed chemical instability which was independent of the container. At 4 degrees C, dipotassium clorazepate showed no decrease in concentration over 12 h, both in 5% dextrose solution and 0.

Comparative sorption of clomipramine, viloxazine, and maprotiline hydrochlorides in polyvinylchloride bags and glass vials.

The sorption of clomipramine, viloxazine, and maprotiline hydrochlorides was studied comparatively in polyvinylchloride (PVC) bags and glass flasks for up to 72 hours. When stored in glass flasks, no decrease in concentration was observed for any of the three drugs, either in dextrose or sodium chloride isotonic solution. When stored in PVC bags, a slight loss (about 7% within 72 hours), was noted for clomipramine hydrochloride in both isotonic solutions, but not for the other two drugs.

Leaching of antioxidants and vulcanization accelerators from rubber closures into drug preparations.

A thin-layer chromatographic method was used to highlight the leaching into drug preparations of several constituents of elastomeric closures. Among the 150 preparations analysed, the twenty-eight local anaesthetics presented in single-dose delivery syringe-cartridges, one Epinephrine injection in prefilled syringes, eight insulin preparations and two Prednisolone acetate suspensions in the form of small volume flasks (less than or equal to 20 ml) were contaminated by one or more of the following: 2-mercaptobenzothiazole (MBT), 2-mercaptobenzothiazole disulphide and 2-mercaptobenzimidazole (MBI). Prednisolone acetate suspensions also contained 2,2'-methylene-bis(4-methyl-6-alpha-methylcyclohexylphenol).

Thin-layer chromatography of amine antioxidants and antiozonants used in elastomers.

Fifty-four amines used as antioxidants and/or antiozonants for elastomers were separated on silica gel thin-layer plates with benzene and benzene-ethyl acetate-acetone (100:5:1) as developing solvents and N-chloro-2,6-dichloro-p-benzoquinone monoimine in buffered alkaline medium as spray reagent. Benzene-n-hexane (50:50) was used to separate diheptyl- and dioctyldiphenylamines. The active agents of several imprecisely defined products were identified and the relationships between some mixtures were elucidated.

Identification of phenolic antioxidants in elastomers for pharmaceutical and medical use.

Phenolic antioxidants were identified by thin-layer chromatography (TLC) in 102 samples of pharmaceutical and medical rubber articles. Despite the large number of antioxidants proposed for elastomers, only eight compounds were found in the articles analyzed. The choice of antioxidants apparently does not depend on the sterilizing processes or on the use or brand of articles.

Thin-layer chromatographic analysis of phenolic age resisters in elastomers in contact with the body, drugs and foods.

Phenolic antioxidants were identified by thin-layer chromatography in 102 samples of medical and pharmaceutical rubber articles. Acetone extracts of rubber were spotted on silica gel plates with a concentrating zone. Benzene, benzene-hexane (75:25) and benzene-ethyl acetate-acetone (100:5:1) were used as developing solvents and N-chloro-2,6-dichloro-p-benzoquinone monoimine as spray reagent.

[Characterization by thin layer chromatography of benzothiazole derivatives and beta-sitosterol leached by disposable syringes].

A thin-layer chromatographic study of 2-mercaptobenzothiazole, 2-(methylthio)benzothiazole, 2-(2-hydroxy-ethylthio)benzothiazole, 2-hydroxybenzothiazole, zinc 2-mercaptobenzothiazolate, mercaptobenzothiazole disulfide, and beta-sitosterol with three developing solvents and eleven spray reagents is reported. A simple method is described which highlights the leaching of 2-mercaptobenzothiazole and 2-(2-hydroxy-ethylthio)benzothiazole from the rubber plunger-seals of disposable syringes: contact of rubber with bidistilled water, extraction of this liquid with chloroform, chromatography on silica gel with the solvents previously studied and spraying with N-chloro-2,6-dichloro-p-benzoquinone monoimine. The method may also be used to discriminate those syringes sterilized with ethylene oxide, the only ones able to leach 2-(2-hydroxy-ethylthio)benzothiazole, from those sterilized by irradiation.

Mass spectral identification of benzothiazole derivatives leached into injections by disposable syringes.

Five benzothiazole derivatives leached into injections by the rubber plunger-seals of disposable syringes were identified by electron impact (EI) and chemical ionization (CI) mass spectrometry. These are 2-hydroxybenzothiazole, 2-mercaptobenzothiazole, 2-(methylmercapto)benzothiazole, 2-(2-hydroxyethoxy)benzothiazole and 2-(2-hydroxyethylmercapto)benzothiazole. 2-Mercaptobenzothiazole is used as a vulcanization accelerator.