Aryl-Acetylene Layered Hybrid Perovskites in Photovoltaics.

Metal halide perovskites have shown exceptional potential in converting solar energy to electric power in photovoltaics, yet their application is hampered by limited operational stability. This stimulated the development of hybrid layered (two-dimensional, 2D) halide perovskites based on hydrophobic organic spacers, templating perovskite slabs, as a more stable alternative. However, conventional organic spacer cations are electronically insulating, resulting in charge confinement within the inorganic slabs, thus limiting their functionality.

Linking Nanoscopic Insights to Millimetric-Devices in Formamidinium-Rich Perovskite Photovoltaics.

Halide-perovskite semiconductors have a high potential for use in single-junction and tandem solar cells. Despite their unprecedented rise in power conversion efficiencies (PCEs) for photovoltaic (PV) applications, it remains unclear whether perovskite solar modules can reach a sufficient operational lifetime. In order to make perovskite solar cells (PSCs) commercially viable, a fundamental understanding of the relationship between their nanostructure, optoelectronic properties, device efficiency, and long-term operational stability/reliability needs to be established.

Assessing the Influence of Illumination on Ion Conductivity in Perovskite Solar Cells.

Whether illumination influences the ion conductivity in lead-halide perovskite solar cells containing iodide halides has been an ongoing debate. Experiments to elucidate the presence of a photoconductive effect require special devices or measurement techniques and neglect possible influences of the enhanced electronic charge concentrations. Here, we assess the electronic-ionic charge transport using drift-diffusion simulations and show that the well-known increase in capacitance at low frequencies under illumination is caused by electronic currents that are amplified due to the screening of the alternating electric field by the ions.

Development and Characterization of NO-Plasma Oxide Layers for High-Temperature p-Type Passivating Contacts in Silicon Solar Cells.

Full-area passivating contacts based on SiO/poly-Si stacks are key for the new generation of industrial silicon solar cells substituting the passivated emitter and rear cell (PERC) technology. Demonstrating a potential efficiency increase of 1 to 2% compared to PERC, the utilization of n-type wafers with an n-type contact at the back and a p-type diffused boron emitter has become the industry standard in 2024. In this work, variations of this technology are explored, considering p-type passivating contacts on p-type Si wafers formed via a rapid thermal processing (RTP) step.

Blade-Coating of High Crystallinity Cesium-Formamidinium Perovskite Formulations.

Up-scalable coating processes need to be developed to manufacture efficient and stable perovskite-based solar modules. In this work, we combine two Lewis base additives (N,N'-dimethylpropyleneurea and thiourea) to fabricate high-quality CsFAPbI perovskite films by blade-coating on large areas. Selected-area electron diffraction patterns reveal a minimization of stacking faults in the α-FAPbI phase for this specific cesium-formamidinium composition in both spin-coated and blade-coated perovskite films, demonstrating its scaling potential.

Alleviating nanostructural phase impurities enhances the optoelectronic properties, device performance and stability of cesium-formamidinium metal-halide perovskites.

The technique of alloying FA with Cs is often used to promote structural stabilization of the desirable α-FAPbI phase in halide perovskite devices. However, the precise mechanisms by which these alloying approaches improve the optoelectronic quality and enhance the stability have remained elusive. In this study, we advance that understanding by investigating the effect of cationic alloying in CsFAPbI perovskite thin-films and solar-cell devices.

Nanostructure and Optical Property Tailoring of Zinc Tin Nitride Thin Films through Phenomenological Decoupling: A Pathway to Enhanced Control.

This work addresses the need for precise control of thin film sputtering processes to enable thin film material tailoring on the example of zinc tin nitride (ZTN) thin films deposited microwave plasma-assisted high power reactive magnetron sputtering (MAR-HiPIMS). The applied diagnostic techniques (Langmuir probe and energy-resolved time-of-flight mass spectrometry) supported monitoring changes in the deposition environment with respect to microwave (MW) power. During MAR-HiPIMS, the presence of nitride ions in the gas phase (ZnN, ZnN, SnN, SnN) was detected.

A Universal Perovskite/C60 Interface Modification via Atomic Layer Deposited Aluminum Oxide for Perovskite Solar Cells and Perovskite-Silicon Tandems.

The primary performance limitation in inverted perovskite-based solar cells is the interface between the fullerene-based electron transport layers and the perovskite. Atomic layer deposited thin aluminum oxide (AlO) interlayers that reduce nonradiative recombination at the perovskite/C interface are developed, resulting in >60 millivolts improvement in open-circuit voltage and 1% absolute improvement in power conversion efficiency. Surface-sensitive characterizations indicate the presence of a thin, conformally deposited AlO layer, functioning as a passivating contact.

New Route for "Cold-Passivation" of Defects in Tin-Based Oxides.

Transparent conductive oxides (TCOs) are essential in technologies coupling light and electricity. For Sn-based TCOs, oxygen deficiencies and undercoordinated Sn atoms result in an extended density of states below the conduction band edge. Although shallow states provide free carriers necessary for electrical conductivity, deeper states inside the band gap are detrimental to transparency.

Direct Imaging of Dopant Distribution in Polycrystalline ZnO Films.

Two fundamental requirements of transparent conductive oxides are high conductivity and low optical absorptance, properties strongly dependent on the free-carrier concentration of the film. The free-carrier concentration is usually tuned by the addition of dopant atoms; which are commonly assumed to be uniformly distributed in the films or partially segregated at grain boundaries. Here, the combination of secondary ion mass spectroscopy at the nanometric scale (NanoSIMS) and Kelvin probe force microscopy (KPFM) allows direct imaging of boron-dopant distribution in polycrystalline zinc oxide (ZnO) films.

In Situ TEM Analysis of Organic-Inorganic Metal-Halide Perovskite Solar Cells under Electrical Bias.

Changes in the nanostructure of methylammonium lead iodide (MAPbI) perovskite solar cells are assessed as a function of current-voltage stimulus by biasing thin samples in situ in a transmission electron microscope. Various degradation pathways are identified both in situ and ex situ, predominantly at the positively biased MAPbI interface. Iodide migrates into the positively biased charge transport layer and also volatilizes along with organic species, which triggers the nucleation of PbI nanoparticles and voids and hence decreases the cell performance.

Self-patterned nanoparticle layers for vertical interconnects: application in tandem solar cells.

We demonstrate self-patterned insulating nanoparticle layers to define local electrical interconnects in thin-film electronic devices. We show this with thin-film silicon tandem solar cells, where we introduce between the two component cells a solution-processed SiO2 nanoparticle layer with local openings to allow for charge transport. Because of its low refractive index, high transparency, and smooth surface, the SiO2 nanoparticle layer acts as an excellent intermediate reflector allowing for efficient light management.

Measurements of local chemistry and structure in Ni(O)-YSZ composites during reduction using energy-filtered environmental TEM.

Energy-filtered transmission electron microscopy images are acquired during the reduction of a NiO-YSZ composite in H2 up to 600 °C. Temperature-resolved quantitative information about both chemistry and structure is extracted with nm spatial resolution from the data, paving the way for the development of detailed reduction models.

Silicon filaments in silicon oxide for next-generation photovoltaics.

Nanometer wide silicon filaments embedded in an amorphous silicon oxide matrix are grown at low temperatures over a large area. The optical and electrical properties of these mixed-phase nanomaterials can be tuned independently, allowing for advanced light management in high efficiency thin-film silicon solar cells and for band-gap tuning via quantum confinement in third-generation photovoltaics.

A Review of RedOx Cycling of Solid Oxide Fuel Cells Anode.

Solid oxide fuel cells are able to convert fuels, including hydrocarbons, to electricity with an unbeatable efficiency even for small systems. One of the main limitations for long-term utilization is the reduction-oxidation cycling (RedOx cycles) of the nickel-based anodes. This paper will review the effects and parameters influencing RedOx cycles of the Ni-ceramic anode.