Revealing the Dynamic Aspects of Photoinduced Halide Segregation in Mixed-Halide CsFAPbIBr Perovskite Films Using a Hyperspectral Imaging Technique.

The band gap energy of halide perovskite semiconductors is manipulated by controlling the halide composition, and mixed halide perovskites are receiving much attention as top cell materials for tandem solar cells. To understand dynamic aspects of photoinduced halide segregation in mixed-halide perovskite films, we use a hyperspectral imaging technique. We reveal the space- and time-resolved photoluminescence (PL) spectra of CsFAPbIBr perovskite films during prolonged light illumination.

Open-Circuit-Voltage Improvement Mechanism of Perovskite Solar Cells Revealed by Operando Spin Observation.

Organic-inorganic hybrid perovskite solar cells have attracted much attention as important next-generation solar cells. Their solar cell performance is known to change during operation, but the root cause of the instability remains unclear. This report describes an investigation using electron spin resonance (ESR) to evaluate an improvement mechanism for the open-circuit voltage, , of inverted perovskite solar cells at the initial stage of device operation.

Enhancing the Hot-Phonon Bottleneck Effect in a Metal Halide Perovskite by Terahertz Phonon Excitation.

We investigate the impact of phonon excitations on the photoexcited carrier dynamics in a lead-halide perovskite CH_{3}NH_{3}PbI_{3}, which hosts unique low-energy phonons that can be directly excited by terahertz pulses. Our time-resolved photoluminescence measurements reveal that strong terahertz excitation prolongs the cooling time of hot carriers, providing direct evidence for the hot-phonon bottleneck effect. In contrast to the previous studies where phonons are treated as a passive heat bath, our results demonstrate that phonon excitation can significantly perturb the carrier relaxation dynamics in halide perovskites through the coupling between transverse- and longitudinal-optical phonons.

A Purified, Solvent-Intercalated Precursor Complex for Wide-Process-Window Fabrication of Efficient Perovskite Solar Cells and Modules.

A high-purity methylammonium lead iodide complex with intercalated dimethylformamide (DMF) molecules, CH NH PbI ⋅DMF, is introduced as an effective precursor material for fabricating high-quality solution-processed perovskite layers. Spin-coated films of the solvent-intercalated complex dissolved in pure dimethyl sulfoxide (DMSO) yielded thick, dense perovskite layers after thermal annealing. The low volatility of the pure DMSO solvent extended the allowable time for low-speed spin programs and considerably relaxed the precision needed for the antisolvent addition step.

Influence of Alkoxy Chain Length on the Properties of Two-Dimensionally Expanded Azulene-Core-Based Hole-Transporting Materials for Efficient Perovskite Solar Cells.

A series of two-dimensionally expanded azulene-core-based π systems have been synthesized with different alkyl chain lengths in the alkoxy moieties connected to the partially oxygen-bridged triarylamine skeletons. The thermal, photophysical, and electronic properties of each compound were evaluated to determine the influence of the alkyl chain length on their effectiveness as hole-transporting materials (HTMs) in perovskite solar cells (PSCs). All the synthesized molecules showed promising material properties, including high solubility, the formation of flat and amorphous films, and optimal alignment of energy levels with perovskites.

Origin of Open-Circuit Voltage Loss in Polymer Solar Cells and Perovskite Solar Cells.

Herein, the open-circuit voltage (V) loss in both polymer solar cells and perovskite solar cells is quantitatively analyzed by measuring the temperature dependence of V to discuss the difference in the primary loss mechanism of V between them. As a result, the photon energy loss for polymer solar cells is in the range of about 0.7-1.

Charge Injection Mechanism at Heterointerfaces in CHNHPbI Perovskite Solar Cells Revealed by Simultaneous Time-Resolved Photoluminescence and Photocurrent Measurements.

Organic-inorganic hybrid perovskite solar cells are attracting much attention due to their excellent photovoltaic properties. In these multilayered structures, the device performance is determined by complicated carrier dynamics. Here, we studied photocarrier recombination and injection dynamics in CHNHPbI perovskite solar cells using time-resolved photoluminescence (PL) and photocurrent (PC) measurements.

Charge Injection at the Heterointerface in Perovskite CH3NH3PbI3 Solar Cells Studied by Simultaneous Microscopic Photoluminescence and Photocurrent Imaging Spectroscopy.

Charge carrier dynamics in perovskite CH3NH3PbI3 solar cells were studied by means of microscopic photoluminescence (PL) and photocurrent (PC) imaging spectroscopy. The PL intensity, PL lifetime, and PC intensity varied spatially on the order of several tens of micrometers. Simultaneous PL and PC image measurements revealed a positive correlation between the PL intensity and PL lifetime, and a negative correlation between PL and PC intensities.

Optical characterization of voltage-accelerated degradation in CHNHPbI perovskite solar cells.

We investigate the performance degradation mechanism of CHNHPbI perovskite solar cells under bias voltage in air and nitrogen atmospheres using photoluminescence and electroluminescence techniques. When applying forward bias, the power conversion efficiency of the solar cells decreased significantly in air, but showed no degradation in nitrogen atmosphere. Time-resolved photoluminescence measurements on these devices revealed that the application of forward bias in air accelerates the generation of non-radiative recombination centers in the perovskite layer buried in the device.

Interfacial Charge-Carrier Trapping in CH3NH3PbI3-Based Heterolayered Structures Revealed by Time-Resolved Photoluminescence Spectroscopy.

The fast-decaying component of photoluminescence (PL) under very weak pulse photoexcitation is dominated by the rapid relaxation of the photoexcited carriers into a small number of carrier-trapping defect states. Here, we report the subnanosecond decay of the PL under excitation weaker than 1 nJ/cm(2) both in CH3NH3PbI3-based heterostructures and bare thin films. The trap-site density at the interface was evaluated on the basis of the fluence-dependent PL decay profiles.

Hole-Transporting Materials with a Two-Dimensionally Expanded π-System around an Azulene Core for Efficient Perovskite Solar Cells.

Two-dimensionally expanded π-systems, consisting of partially oxygen-bridged triarylamine skeletons that are connected to an azulene (1-3) or biphenyl core (4), were synthesized and characterized. When tetra-substituted azulene 1 was used as a hole-transporting material (HTM) in perovskite solar cells, the observed performance (power conversion efficiency = 16.5%) was found to be superior to that of the current HTM standard Spiro-OMeTAD.