Exploring the Use of Water-Extracted Flaxseed Hydrocolloids in Three-Dimensional Cell Culture.

Plant-derived hydrocolloids offer promising prospects in biomedical applications. Among these, Flaxseed hydrocolloid (FSH) can form a soft, elastic, and biocompatible hydrocolloid with tunable viscosity and superior swelling capacity, making it an attractive scaffold. This study introduces a green extraction method for FSH, employing a single-step aqueous extraction process and fabrication of FSH scaffold.

Development of Mg-Alginate Based Self Disassociative Bio-Ink for Magnetic Bio-Patterning of 3D Tumor Models.

Alginate forms a hydrogel via physical cross-linking with divalent cations. In literature, Ca is mostly utilized due to strong interactions but additional procedures are required to disassociate Ca-alginate hydrogels. On the other hand, Mg-alginate hydrogels disassociate spontaneously, which might benefit certain applications.

Near-Infrared Emissive Super Penetrating Conjugated Polymer Dots for Intratumoral Imaging in 3D Tumor Spheroid Models.

This study describes the formation of single-chain polymer dots (Pdots) via ultrasonic emulsification of nonionic donor-acceptor-donor type (D-A-D) alkoxy thiophene-benzobisthiadiazole-based conjugated polymers (Poly BT) with amphiphilic cetyltrimethylammonium bromide (CTAB). The methodology yields Pdots with a high cationic surface charge (+56.5 mV ± 9.

Arabinoxylan-based psyllium seed hydrocolloid: Single-step aqueous extraction and use in tissue engineering.

Biomacromolecules derived from natural sources offer superior biocompatibility, biodegradability, and water-holding capacity, which make them promising scaffolds for tissue engineering. Psyllium seed has gained attention in biomedical applications recently due to its gel-forming ability, which is provided by its polysaccharide-rich content consisting mostly of arabinoxylan. This study focuses on the extraction and gelation of Psyllium seed hydrocolloid (PSH) in a single-step water-based protocol, and scaffold fabrication using freeze-drying method.

Exploring Neuronal Differentiation Profiles in SH-SY5Y Cells through Magnetic Levitation Analysis.

Magnetic levitation (MagLev) is a powerful and versatile technique that can sort objects based on their density differences. This paper reports the sorting of SH-SY5Y cells for neuronal differentiation by the MagLev technique. Herein, SH-SY5Y cells were differentiated with retinoic acid (RA) and brain-derived neurotrophic factor (BDNF).

Utilizing Magnetic Levitation to Detect Lung Cancer-Associated Exosomes.

Extracellular vesicles, especially exosomes, have attracted attention in the last few decades as novel cancer biomarkers. Exosomal membrane proteins provide easy-to-reach targets and can be utilized as information sources of their parent cells. In this study, a MagLev-based, highly sensitive, and versatile biosensor platform for detecting minor differences in the density of suspended objects is proposed for exosome detection.

Fabrication of gelatin-polyester based biocomposite scaffold via one-step functionalization of melt electrowritten polymer blends in aqueous phase.

The rapid manufacturing of biocomposite scaffold made of saturated-Poly(ε-caprolactone) (PCL) and unsaturated Polyester (PE) blends with gelatin and modified gelatin (NCO-Gel) is demonstrated. Polyester blend-based scaffold are fabricated with and without applying potential in the melt electrowriting system. Notably, the applied potential induces phase separation between PCL and PE and drives the formation of PE rich spots at the interface of electrowritten fibers.

The Soft Nanodots as Fluorescent Probes for Cell Imaging: Analysis of Cell and Spheroid Penetration Behavior of Single Chain Polymer Dots.

This study describes the formation, size control, and penetration behavior of polymer nanodots (Pdots) consisting of single or few chain polythiophene-based conjugated polyelectrolytes (CPEs) via nanophase separation between good solvent and poor solvent of CPE. Though the chain singularity may be associated with dilution nanophase separation suggests that molecules of a good solvent create a thermodynamically driven solvation layer surrounding the CPEs and thereby separating the single chains even in their poor solvents. This statement is therefore corroborated with emission intensity/lifetime, particle size, and scattering intensity of polyelectrolyte in good and poor solvents.

Biopatterning of 3D Cellular Model by Contactless Magnetic Manipulation for Cardiotoxicity Screening.

Impact statement Contactless manipulation and cell patterning techniques provide rapid and cost-effective three-dimensional (3D) cell culture model formation for tissue engineering applications. The present study introduces a new methodology that comprised alginate-based bioink to pattern cells via contactless magnetic manipulation to fabricate 3D cardiac structures. The developed cardiac model was evaluated in terms of Doxorubicin-induced cardiotoxicity and biopatterned 3D cardiac structures were found more resistant to drug exposure compared to two-dimensional control.

Fabrication and development of a microfluidic paper-based immunosorbent assay platform (μPISA) for colorimetric detection of hepatitis C.

Paper-based microfluidics is an emerging analysis tool used in various applications, especially in point-of-care (PoC) diagnostic applications, due to its advantages over other types of microfluidic devices in terms of simplicity in both production and operation, cost-effectiveness, rapid response time, low sample consumption, biocompatibility, and ease of disposal. Recently, various techniques have been developed and utilized for the fabrication of paper-based microfluidics, such as photolithography, micro-embossing, wax and PDMS printing, . In this study, we offer a fabrication methodology for a microfluidic paper-based immunosorbent assay (μPISA) platform and the detection of Hepatitis C Virus (HCV) was carried out to validate this platform.

Development of a hydrocolloid bio-ink for 3D bioprinting.

A new generation of bio-inks that are soft, viscous enough, stable in cell culture, and printable at low printing pressures is required in the current state of 3D bioprinting technology. Hydrogels can meet these features and can mimic the microenvironment of soft tissues easily. Hydrocolloids are a group of hydrogels which have a suitable gelling capacity and rheological properties.

Fabrication of Tunable 3D Cellular Structures in High Volume Using Magnetic Levitation Guided Assembly.

Tunable and reproducible size with high circularity is an important limitation to obtain three-dimensional (3D) cellular structures and spheroids in scaffold free tissue engineering approaches. Here, we present a facile methodology based on magnetic levitation (MagLev) to fabricate 3D cellular structures rapidly and easily in high-volume and low magnetic field. In this study, 3D cellular structures were fabricated using magnetic levitation directed assembly where cells are suspended and self-assembled by contactless magnetic manipulation in the presence of a paramagnetic agent.

Glucuronoxylan-based quince seed hydrogel: A promising scaffold for tissue engineering applications.

Natural gums and mucilages from plant-derived polysaccharides are potential candidates for a tissue-engineering scaffold by their ability of gelation and biocompatibility. Herein, we utilized Glucuronoxylan-based quince seed hydrogel (QSH) as a scaffold for tissue engineering applications. Optimization of QSH gelation was conducted by varying QSH and crosslinker glutaraldehyde (GTA) concentrations.

Electrospun GelMA fibers and p(HEMA) matrix composite for corneal tissue engineering.

The development of biocompatible and transparent three-dimensional materials is desirable for corneal tissue engineering. Inspired from the cornea structure, gelatin methacryloyl-poly(2-hydroxymethyl methacrylate) (GelMA-p(HEMA)) composite hydrogel was fabricated. GelMA fibers were produced via electrospinning and covered with a thin layer of p(HEMA) in the presence of N,N'-methylenebisacrylamide (MBA) as cross-linker by drop-casting.

Smartphone-assisted Hepatitis C detection assay based on magnetic levitation.

This work describes development of smartphone-assisted magnetic levitation assay for Point-of-Care (PoC) applications. Magnetic levitation is a technique that detects and separates particles based on their density differences in a magnetic field. Observation of the levitated micro-particles is mainly performed by light microscope or additional optical components, which mostly limits applicability of the magnetic levitation technique for PoC diagnostics.

Biomimetic hybrid scaffold consisting of co-electrospun collagen and PLLCL for 3D cell culture.

Electrospun collagen is commonly used as a scaffold in tissue engineering applications since it mimics the content and morphology of native extracellular matrix (ECM) well. This report describes "toxic solvent free" fabrication of electrospun hybrid scaffold consisting of Collagen (Col) and Poly(l-lactide-co-ε-caprolactone) (PLLCL) for three-dimensional (3D) cell culture. Biomimetic hybrid scaffold was fabricated via co-spinning approach where simultaneous electrospinning of PLLCL and Collagen was mediated by polymer sacrificing agent Polyvinylpyrrolidone (PVP).

Correction: Scaffold-free three-dimensional cell culturing using magnetic levitation.

Correction for 'Scaffold-free three-dimensional cell culturing using magnetic levitation' by Esra Türker et al., Biomater. Sci.

Biofabrication of in situ Self Assembled 3D Cell Cultures in a Weightlessness Environment Generated using Magnetic Levitation.

Magnetic levitation though negative magnetophoresis is a novel technology to simulate weightlessness and has recently found applications in material and biological sciences. Yet little is known about the ability of the magnetic levitation system to facilitate biofabrication of in situ three dimensional (3D) cellular structures. Here, we optimized a magnetic levitation though negative magnetophoresis protocol appropriate for long term levitated cell culture and developed an in situ 3D cellular assembly model with controlled cluster size and cellular pattern under simulated weightlessness.

Scaffold-free three-dimensional cell culturing using magnetic levitation.

Three-dimensional (3D) cell culture has emerged as a pioneering methodology and is increasingly utilized for tissue engineering, 3D bioprinting, cancer model studies and drug development studies. The 3D cell culture methodology provides artificial and functional cellular constructs serving as a modular playground prior to animal model studies, which saves substantial efforts, time and experimental costs. The major drawback of current 3D cell culture methods is their dependency on biocompatible scaffolds, which often require tedious syntheses and fabrication steps.

Recent Advances in Magnetic Levitation: A Biological Approach from Diagnostics to Tissue Engineering.

The magnetic levitation technique has been utilized to orientate and manipulate objects both in two dimensions (2D) and three dimensions (3D) to form complex structures by combining various types of materials. Magnetic manipulation holds great promise for several applications such as self-assembly of soft substances and biological building blocks, manipulated tissue engineering, as well as cell or biological molecule sorting for diagnostic purposes. Recent studies are proving the potential of magnetic levitation as an emerging tool in biotechnology.

Towards artificial tissue models: past, present, and future of 3D bioprinting.

Regenerative medicine and tissue engineering have seen unprecedented growth in the past decade, driving the field of artificial tissue models towards a revolution in future medicine. Major progress has been achieved through the development of innovative biomanufacturing strategies to pattern and assemble cells and extracellular matrix (ECM) in three-dimensions (3D) to create functional tissue constructs. Bioprinting has emerged as a promising 3D biomanufacturing technology, enabling precise control over spatial and temporal distribution of cells and ECM.

Magnetic levitation of single cells.

Several cellular events cause permanent or transient changes in inherent magnetic and density properties of cells. Characterizing these changes in cell populations is crucial to understand cellular heterogeneity in cancer, immune response, infectious diseases, drug resistance, and evolution. Although magnetic levitation has previously been used for macroscale objects, its use in life sciences has been hindered by the inability to levitate microscale objects and by the toxicity of metal salts previously applied for levitation.

Biomimetic membrane platform containing hERG potassium channel and its application to drug screening.

The hERG (human ether-à-go-go-related gene) potassium channel has been extensively studied by both academia and industry because of its relation to inherited or drug-induced long QT syndrome (LQTS). Unpredicted hERG and drug interaction affecting channel activity is of main concern for drug discovery. Although there are several methods to test hERG and drug interaction, it is still necessary to develop some efficient and economic ways to probe hERG and drug interactions.

Biomimetic membrane platform: fabrication, characterization and applications.

A facile method for assembly of biomimetic membranes serving as a platform for expression and insertion of membrane proteins is described. The membrane architecture was constructed in three steps: (i) assembly/printing of α-laminin peptide (P19) spacer on gold to separate solid support from the membrane architecture; (ii) covalent coupling of different lipid anchors to the P19 layer to serve as stabilizers of the inner leaflet during bilayer formation; (iii) lipid vesicle spreading to form a complete bilayer. Two different lipid membrane systems were examined and two different P19 architectures prepared by either self-assembly or μ-contact printing were tested and characterized using contact angle (CA) goniometry, surface plasmon resonance (SPR) spectroscopy and imaging surface plasmon resonance (iSPR).

Purification and structural characterization of the voltage-sensor domain of the hERG potassium channel.

The hERG (human ether à go-go related gene) potassium channel is a voltage-gated potassium channel playing important roles in the heart by controlling the rapid delayed rectifier potassium current. The hERG protein contains a voltage-sensor domain (VSD) that is important for sensing voltage changes across the membrane. Mutations in this domain contribute to serious heart diseases.