Multidisciplinary approach to a subgingivally fractured incisor tooth: A case report.

This case report describes a multidisciplinary approach using orthodontic forced eruption to facilitate prosthetic restoration of a subgingivally fractured maxillary permanent central incisor. A 14-year-old male patient presented at the pediatric dental clinic due to unesthetic appareance and for management of a fractured maxillary right central incisor tooth. Intraoral examination revealed that the maxillary right central incisor had sustained a crown-root fracture with pulp exposure.

A technique to facilitate the fabrication of provisional restorations for ITI solid abutments.

The aim of this technique report was to present a procedure for the fabrication of provisional restorations for ITI solid abutments using impression caps in the laboratory with a number of advantages over intraoral techniques. There may be no need for cementation, and elimination of cementation may assist tissue healing.

Effects of different acids and etching times on the bond strength of glass fiber-reinforced composite root canal posts to composite core material.

Objective: To investigate the effects of different acids and etching times on the bond strength of glass fiber-reinforced composite (FRC) posts to composite core material.

Method And Materials: Twenty-six FRC posts (FRC Postec Plus) were randomly divided into 13 groups (each n = 2). One group received no surface treatment (control).

Resonance frequency analysis of 208 Straumann dental implants during the healing period.

The most important prerequisite for the success of an osseointegrated dental implant is achievement and maintenance of implant stability. The aim of the study was to measure the 208 Straumann dental implant stability quotient (ISQ) values during the osseointegration period and determine the factors that affect implant stability. A total of 164 of the implants inserted were standard surface, and 44 of them were SLActive surface.

Effects of air-polishing powders on color stability of composite resins.

Objectives: The purpose of this study was to investigate the effect of different air-polishing powders on the color stability of different types of composite resin restorative materials.

Material And Methods: Thirty cylindrical specimens (15×2 mm) were prepared for each of 7 composite resin restorative materials. All specimens were polished with a series of aluminum oxide polishing discs (Sof-Lex).

A technique for removal of a fractured implant abutment screw.

The aim of this technique report was to present a procedure for removal of a fractured implant abutment screw. Whatever the cause, when an abutment fracture has occurred, the fractured screw segment inside the implant must be removed. The methods used by the clinicians may include the use of an endo-explorer self-made screwdriver and the use of implant repair kit available for some implant systems.

Alternative treatment procedure in the case of fractured abutment of adhesive bridge: a clinical report.

Unlabelled: In this case report, an alternative approach was presented for treatment of coronal fracture including pulp of maxillary central incisor, one of the abutments of an adhesive bridge, by using fiber post and tooth's own fractured component. The patient was referred to our clinic with the complaint of pain from the upper right central incisor and mobility of the adhesive bridge in maxillary anterior segment. It was realized that, the upper right central incisor, one of the abutments of the adhesive bridge, had been fractured at middle thirds of the crown including the pulp chamber.

Effects of Er:YAG laser treatments on surface roughness of base metal alloys.

We investigated the effects of different Er:YAG laser treatments on the surface roughness of base metal alloys. A total of 36 specimens were prepared of two base metal alloys (Wiron 99, Bellabond plus). The surfaces of the specimens were standardized by gradual wet grinding with 320-, 600-, 800- and 1,000-grit silicon carbide paper for 10 s each on a grinding machine at 300 rpm.

Effects of different polishing techniques on the surface roughness of dental porcelains.

Objective: The purpose of this study was to evaluate the effects of different polishing techniques on the surface roughness of dental porcelains.

Material And Methods: Fifty-five cylindirical specimens (15x2 mm) were prepared for each feldspathic (Vita VMK 95, Ceramco III) and low-fusing dental porcelain (Matchmaker). Fifty-five specimens of machinable feldspathic porcelain blocks (Vitablocs Mark II), (12x14x18 mm) were cut into 2-mm-thick slices (12x14 mm) with low speed saw.

The effects of children's drinks on the color stability of various restorative materials.

Objective: To evaluate the effects of exposure to various children's drinks on the color stability of different esthetic restorative material commonly used in pediatric dentistry.

Study Design: Cylindrical specimens (15 x 2mm) were prepared from four different restorative materials (Fuji IX, Fuji II LC, Dyract Extra, and Filtek Z250). For each material, 20 specimens were prepared and divided into four groups.

Pulpal blood flow changes in abutment teeth of removable partial dentures.

The purpose of this study was to investigate the effect of tooth supported (TSD) and tooth-tissue supported (TTSD) removable partial denture wearing on pulpal blood flow (PBF) of the abutment teeth by using Laser Doppler Flowmeter (LDF). Measurements were carried out on 60 teeth of 28 patients (28 teeth and 12 patients of TTSD group, 32 teeth and 16 patients of TSD group) who had not worn any type of removable partial dentures before, had no systemic problems and were non smokers. PBF values were recorded by LDF before insertion (day 0) and after insertion of dentures at day 1, day 7 and day 30.

Effect of filler ratio in adhesive systems on the shear bond strength of resin composite to porcelains.

This in vitro study evaluated the effect of six different adhesive systems on the shear bond strength of resin composite to feldspathic and low-fusing porcelains. Sixty porcelain blocks were prepared for each low-fusing (Matchmaker) and feldspathic (MVK95) porcelain specimen. After surface preparation, the porcelain specimens were divided into six groups (n = 10) for different adhesive systems (Adper Prompt L-Pop, QuadrantUnil Bond, Te-Econom, PQ1, One-StepPlus and Prime&Bond NT).

Effects of polishing procedures on color stability of composite resins.

The purpose of this study was to investigate the effect of different polishing methods on color stability of posterior, universal and nanohybrid composite resin restorative materials upon exposure to a staining agent. Twenty-five specimens were prepared for each of 5 different composite resins (Filtek Z250, Filtek P60, Quadrant LC, Grandio and Filtek Supreme). Specimens were divided into 5 groups and different polishing procedures, including polishing discs (Pd), polishing discs then diamond polishing paste (PdP), polishing discs then a liquid polishing system (Biscover) (PdB), and combinations of these (PdPB) were used.

Panoramic radiographic examination of edentulous mouths.

Objective: Panoramic radiographs often are the first method used to screen edentulous patients before complete denture therapy. However, routine radiographic examination of edentulous patients is being questioned because of the cumulative effects and cost of radiation exposure. The purpose of this study was to determine the frequency and location of significant radiographic findings in edentulous jaws.

Bacterial penetration after obturation with four different root canal sealers.

The aim of this study was to compare bacterial penetration after obturation with lateral compaction technique using four different root canal sealers. This study was performed on 100 teeth including negative control (n = 10), positive control (n = 10), and experimental groups (n = 80). 80 teeth were randomly divided into five groups of 20 teeth each and obturated with AH 26 (A), AH Plus (AP), Sealapex (S), Ketac-Endo (K) root canal sealers.

Color stability of resin composites after immersion in different drinks.

The purpose of this study was to evaluate the discoloration of two nanohybrids, two microhybrids, and a posterior composite resin restorative material upon exposure to different drinks--namely tea, cola, coffee, red wine, and water. The colors of all specimens before and after storage in the solutions were measured by a colorimeter based on CIE Lab system, and the color differences thereby calculated. Data were analyzed by two-way analysis of variance (ANOVA) and Tukey's HSD test.

Effect of acid etching time and a self-etching adhesive on the shear bond strength of composite resin to porcelain.

Unlabelled: PURPOSE The purpose of this study was to evaluate the effect of different acid etching times with 9.6% hydrofluoric acid gel and two adhesive systems on shear bond strengths of resin composite to porcelain.

Materials And Methods: Ninety-eight 7 x 7 x 2 mm feldspathic porcelain blocks (VMK 95, Vita) were prepared.

Effects of different drinks on stainability of resin composite provisional restorative materials.

Statement Of Problem: The ability of tooth-colored restorative materials for provisional restorations to resist stains is important when interim prostheses are worn for a long period. Discoloration of provisional restorative materials may result in patient dissatisfaction and additional time and expense for replacement. However, the effect of different staining agents on the color difference of resin composite restorative materials has not been completely clarified.

Evaluation of 24-hour shear bond strength of resin composite to porcelain according to surface treatment.

Purpose: The purpose of the present in vitro study was to examine shear bond strengths of resin composite to porcelain according to surface treatment.

Materials And Methods: One hundred eight feldspathic porcelain blocks were prepared. Specimens were divided into nine surface treatment groups: sandblasting with 50- or 110-microm Al2O3, acid etching with hydrofluoric acid, applying silane agent, and combinations of these treatments.

Effects of various finishing procedures on the staining of provisional restorative materials.

Statement Of Problem: The color stability of tooth-colored restorative materials for provisional restorations is of primary importance when provisional prostheses are worn long term. However, the effect of different polishing methods on the color difference of provisional restorative (PR) materials has not been completely clarified.

Purpose: The purpose of this study was to investigate the effect of different polishing methods on color stability of 2- and 3-component autopolymerized bis-acrylic composites, a light polymerized composite, and a methyl methacrylate-based PR material upon exposure to a staining agent.

Prosthetic treatment of a patient with facioscapulohumeral muscular dystrophy: a clinical report.

Facioscapulohumeral muscular dystrophy syndrome (FSHD) is a rare hereditary myopathy characterized by muscle atrophy and weakness, particularly in the face and upper arms. Patients may also exhibit dental malocclusions. This article presents the prosthodontic treatment for an 18-year old male with FSHD.