A Novel Digital Implant Planning Workflow in Patients with Preexisting Metal Restorations: A Technical Report.

A prosthetically-driven virtual implant plan is considered a challenging procedure depending on accurate registration of the three-dimensional optical surface scan and 3D volumetric rendering reconstructed from cone-beam computed tomography (CBCT) images. However, the presence of preexisting metal restorations may significantly negatively influence the registration process. This technical report describes a novel digital workflow to optimize the implant planning outcome for the partially edentulous patient with preexisting metal restorations by accurately aligning the standard triangle language data of the intraoral scanner with the CBCT rendering using a dual-scan technique and an appliance with radiographic markers.

Digital Workflow of Auricular Rehabilitation: A Technical Report Using an Intraoral Scanner.

Prosthodontic rehabilitation of a congenital or acquired defect of the ear is considered a challenging and skill-dependent procedure. This technical report describes a novel approach for direct digital scanning of the unaffected contralateral ear using an intraoral scanner and external markers. The obtained digital data of the ear was exported, digitally mirrored, and successfully positioned to a virtual model of a human head with a missing ear.

Esthetic outcome for maxillary anterior single implants assessed by different dental specialists.

Purpose: The aim of this study was to assess the esthetic outcome of maxillary anterior single implants by comparing the esthetic perception of dental professionals and patients.

Materials And Methods: Twenty-three patients with single implants in the esthetic zone were enrolled in this study. Dentists of four different dental specialties (Three orthodontists, three oral surgeons, three prosthodontists, and three periodontists) evaluated the pink esthetic score (PES)/white esthetic score (WES) for 23 implant-supported single restorations.

The role of well-defined nanotopography of titanium implants on osseointegration: cellular and molecular events in vivo.

Purpose: Mechanisms governing the cellular interactions with well-defined nanotopography are not well described in vivo. This is partly due to the difficulty in isolating a particular effect of nanotopography from other surface properties. This study employed colloidal lithography for nanofabrication on titanium implants in combination with an in vivo sampling procedure and different analytical techniques.

Effect of implant design and bioactive glass coating on biomechanical properties of fiber-reinforced composite implants.

This study aimed to evaluate the influence of implant design and bioactive glass (BAG) coating on the response of bone to fiber-reinforced composite (FRC) implants. Three different FRC implant types were manufactured for the study: non-threaded implants with a BAG coating; threaded implants with a BAG coating; and threaded implants with a grit-blasted surface. Thirty-six implants (six implants for each group per time point) were installed in the tibiae of six pigs.

Bone response to physical-vapour-deposited titanium dioxide coatings on titanium implants.

Objectives: The aim of this study was to investigate the correlation between coating thickness and the crystal structure of physical-vapour-deposited (PVD) titanium dioxide coatings, and to evaluate their in vivo biocompatibility.

Materials And Methods: The PVD TiO 2 coatings of different thickness were deposited on machined titanium grade 2 screw-shaped implants. Non-coated titanium implants were used as controls.

Bone tissue reactions to biomimetic ion-substituted apatite surfaces on titanium implants.

The aim of this study was to evaluate the bone tissue response to strontium- and silicon-substituted apatite (Sr-HA and Si-HA) modified titanium (Ti) implants. Sr-HA, Si-HA and HA were grown on thermally oxidized Ti implants by a biomimetic process. Oxidized implants were used as controls.

Stress and strain analysis of the bone-implant interface: a comparison of fiber-reinforced composite and titanium implants utilizing 3-dimensional finite element study.

This study analyzed stress and strain mediated by 2 different implant materials, titanium (Ti) and experimental fiber-reinforced composite (FRC), on the implant and on the bone tissue surrounding the implant. Three-dimensional finite element models constructed from a mandibular bone and an implant were subjected to a load of 50 N in vertical and horizontal directions. Postprocessing files allowed the calculation of stress and strain within the implant materials and stresses at the bone-to-implant interface (stress path).

Osteoblast proliferation and maturation on bioactive fiber-reinforced composite surface.

The objective of this study was to evaluate the proliferation and osteogenic potential of bone-marrow derived osteoblast-like cells on fiber-reinforced composite (FRC) substrates with and without bioactive glass surface modification. Three FRC materials were fabricated for the study: (a) grit-blasted FRC, (b) grit-blasted FRC with bidirectional net reinforcement and (c) FRC with bioactive glass (BAG) coating. Rat bone-marrow derived osteoblast-like cells were harvested and cultured on experimental material plates and on cp.

Load bearing capacity of bone anchored fiber-reinforced composite device.

The purpose of this study was to evaluate the push-out load-bearing capacity of threaded fiber-reinforced composite (FRC) devices for use as bone-anchored devices. The purpose was also to evaluate the possibility to use bioactive glass (BAG) granules on the experimental FRC devices in terms the mechanical behavior. Three experimental FRC devices (n = 15) were fabricated for the study: (a) threaded device with smooth surface; (b) threaded device with BAG granules (S53P4, Vivoxid Ltd, Turku, Finland) and supplementary retention grooves, and (c) unthreaded device with BAG granules.

Fracture resistance of fragmented incisal edges restored with fiber-reinforced composite.

Purpose: The aim of this study was to determine the static load-bearing capacity of fractured incisors restored with the conventional adhesive-composite technique or by using fiber-reinforced composites (FRC).

Materials And Methods: Twelve extracted sound maxillary incisors per group were prepared by cutting the incisal (one-third) part of the crown horizontally. Restorations were made using three techniques.