Comparison activity of pure and chromium-doped nickel oxide nanoparticles for the selective removal of dyes from water.

The current study involves a synthesis of a composite of nickel oxide nanoparticles (NiONPs) with a chromium dopant to yield (Cr/NiONPs). Synthesis of nickel oxide was performed by the co-precipitation method. The synthesis of the composite was conducted by the impregnation method.

High-performance photocatalytic degradation and antifungal activity of chromium-doped nickel oxide nanoparticles.

The elimination of pollutants such as dyes and fungi has become a tedious process hence there is a need for multifunctional materials that can be used for the removal or degradation of various pollutants from wastewater. Here, a nickel oxide nanoparticle (NiONPs) was synthesized by the co-precipitation method. In the current study, a composite of nickel oxide nanoparticles (NiONPs) was synthesized using nitrogen and chromium as dopants to create (N/NiONPs) and (Cr/N/NiONPs), respectively and used for the removal of dyes and fungi.

Fabrication of graded porous structure of hydroxypropyl cellulose hydrogels via temperature-induced phase separation.

A novel hydroxypropyl cellulose (gHPC) hydrogel with graded porosity has been fabricated, in which pore size, shape, and mechanical properties vary across the material. The graded porosity was achieved by cross-linking different parts of the hydrogel at temperatures below and above 42 °C, which was found to be the temperature of turbidity onset (lower critical solution temperature, LCST) for the HPC and divinylsulfone cross-linker mixture. Scanning electron microscopy imaging revealed a decreasing pore size along the cross-section of the HPC hydrogel from the top to the bottom layer.

Emerging nanotechnologies for targeting antimicrobial resistance.

Antimicrobial resistance is a leading cause of mortality worldwide. Without newly approved antibiotics and antifungals being brought to the market, resistance is being developed to the ones currently available to clinicians. The reason is the applied evolutionary pressure to bacterial and fungal species due to the wide overuse of common antibiotics and antifungals in clinical practice and agriculture.

Enhanced Antimould Action of Surface Modified Copper Oxide Nanoparticles with Phenylboronic Acid Surface Functionality.

Antimould agents are widely used in different applications, such as specialty paints, building materials, wood preservation and crop protection. However, many antimould agents can be toxic to the environment. This work aims to evaluate the application of copper oxide nanoparticles (CuONPs) surface modified with boronic acid (BA) terminal groups as antimould agents.

"Ghost" Silica Nanoparticles of "Host"-Inherited Antibacterial Action.

We fabricated surface-rough mesoporous silica nanoparticles ("ghost" SiONPs) by using composite mesoporous copper oxide nanoparticles ("host" CuONPs) as templates, which allowed us to mimic their surface morphology. The "host" CuONPs used here as templates, however, had a very high antibacterial effect, with or without functionalization. To evaluate the surface roughness effect on the "ghost" SiONPs antibacterial action, we functionalized them with (3-glycidyloxypropyl)trimethoxysilane (GLYMO) to permit additional covalent coupling of 4-hydroxyphenylboronic acid (4-HPBA).

Controlling the Antimicrobial Action of Surface Modified Magnesium Hydroxide Nanoparticles.

Magnesium hydroxide nanoparticles (Mg(OH)NPs) have recently attracted significant attention due to their wide applications as environmentally friendly antimicrobial nanomaterials, with potentially low toxicity and low fabrication cost. Here, we describe the synthesis and characterisation of a range of surface modified Mg(OH)NPs, including particle size distribution, crystallite size, zeta potential, isoelectric point, X-ray diffraction (XRD), dynamic light scattering (DLS), scanning electron microscopy (SEM), thermogravimetric analysis (TGA), energy dispersive X-ray analysis (EDX), Fourier transform infrared spectroscopy (FTIR), and transmission electron microscopy (TEM). We explored the antimicrobial activity of the modified Mg(OH)NPs on the microalgae (), yeast () and ).

Self-grafting copper oxide nanoparticles show a strong enhancement of their anti-algal and anti-yeast action.

We have developed and tested copper oxide nanoparticles (CuONPs) grafted with (3-glycidyloxypropyl)trimethoxysilane (GLYMO) and coupled with 4-hydroxyphenylboronic acid (4-HPBA), which provides a very strong boost of their action as anti-algal and anti-yeast agents. The boronic acid terminal groups on the surface of the CuONPs/GLYMO/4-HPBA can form reversible covalent bonds with the diol groups of glycoproteins and carbohydrates expressed on the cell surface where they bind and accumulate, which is not based on electrostatic adhesion. Results showed that, the impact of the 4-HPBA grafted CuONPs on microalgae () and yeast () is several hundred percent higher than that of bare CuONPs and CuONPs/GLYMO at the same particle concentration.

Strongly Enhanced Antibacterial Action of Copper Oxide Nanoparticles with Boronic Acid Surface Functionality.

Copper oxide nanoparticles (CuONPs) have been widely recognized as good antimicrobial agents but are heavily regulated due to environmental concerns of their postuse. In this work, we have developed and tested a novel type of formulation for copper oxide (CuONPs) which have been functionalized with (3-glycidyloxypropyl)trimethoxysilane (GLYMO) to allow further covalent coupling of 4-hydroxyphenylboronic acid (4-HPBA). As the boronic acid (BA) groups on the surface of CuONPs/GLYMO/4-HPBA can form reversible covalent bonds with the diol groups of glycoproteins on the bacterial cell surface, they can strongly bind to the cells walls resulting in a very strong enhancement of their antibacterial action which is not based on electrostatic adhesion.

Colloid particle formulations for antimicrobial applications.

Colloidal particles are being extensively studied in various antimicrobial applications due to their small size to volume ratio and ability to exhibit a wide spectrum of antibacterial, antifungal, antialgal and antiviral action. The present review focuses on various nanoparticles (NPs) of inorganic, organic and hybrid materials, and discusses some of the methods for their preparation as well as mechanisms of their antimicrobial action. We consider the antimicrobial applications of metal oxide nanoparticles (ZnO, MgO, CuO, CuO, AlO, TiO, CeO and YO), metal nanoparticles (NPs), such as copper, silver and gold, metal hydroxide NPs such as Mg(OH) as well as hybrid NPs made from biodegradable materials, such as chitosan, lignin and dextran, loaded with other antimicrobial agents.