Novel 3D printed bioactive SiC orthopedic screw promotes bone growth associated activities by macrophages, neurons, and osteoblasts.

Ceramic additive manufacturing currently relies on binders or high-energy lasers, each with limitations affecting final product quality and suitability for medical applications. To address these challenges, our laboratory has devised a surface activation technique for ceramic particles that eliminates the necessity for polymer binders or high-energy lasers in ceramic additive manufacturing. We utilized this method to 3D print bioactive SiC orthopedic screws and evaluated their properties.

Bioactive Carbonate Apatite Cement with Enhanced Compressive Strength via Incorporation of Silica Calcium Phosphate Composites and Calcium Hydroxide.

Carbonate apatite (COAp) is a bioceramic material with excellent properties for bone and dentin regeneration. To enhance its mechanical strength and bioactivity, silica calcium phosphate composites (Si-CaP) and calcium hydroxide (Ca(OH)) were added to COAp cement. The aim of this study was to investigate the effect of Si-CaP and Ca(OH) on the mechanical properties in terms of the compressive strength and biological characteristics of COAp cement, specifically the formation of an apatite layer and the exchange of Ca, P, and Si elements.

Inhibition of osteoclast activities by SCPC bioceramic promotes osteoblast-mediated graft resorption and osteogenic differentiation.

Maximizing vital bone in a grafted site is dependent on a number of factors. These include resorption or turnover of the graft material, stimulation of bone formation pathway without a need for biological molecules added to the site and inhibition of cellular activities that compromise the mineralization of new bone matrix. In the present study, the dissolution profile of silica-calcium phosphate composite (SCPC) in physiological solution was measured and the data were fed to (ANN-NARX) prediction model to predict the time required for complete dissolution.

Views of Farmers and Industrial Entrepreneurs on The Iberian Pig Quality Standard: An In-Depth Interview Research Study.

Since 2014, the Quality Standard for Iberian meat, leg ham, shoulder ham and dry-cured loin has regulated production factors and processes involved in the raw material and manufactured products from Iberian pigs, the most important pig breed in both population size and economic importance of the southwest Iberian Peninsula. Regarding the changes to the Quality Standard that industrial entrepreneurs and farmers are currently demanding, a qualitative research study has been developed through 14 in-depth interviews with the purpose of understanding the perception of Iberian pig farmers and industrial entrepreneurs of the requirements of the currently-effective Quality Standard, as well as the conditions under which this is being applied. The results showed a consensus amongst the majority of the participants in aspects such as the maintenance of the breed base as 100% Iberian for reproductive females, weight and age requirements at the time of slaughter for the montanera category and the manufacturing lengths for dry-cured products.

Consumers' Perspectives on Alternative Short Food Supply Chains Based on Social Media: A Focus Group Study in Spain.

Nowadays, an increasing number of consumers are demanding more information and more direct contact with food producers in order to avoid the various intermediaries in the supply chain, thus improving food traceability and price transfer. This has led to the development of more direct (short) food supply chains (SFSCs). Although consumer preferences to use SFSCs rather than traditional (long) supply chains have been widely researched in the literature, this study brings a new approach with the use of social media sites to build online SFSCs.

Tissue Engineering: What is New?

Soft and hard tissue engineering has expanded the frontiers of oral/maxillofacial augmentation. Soft tissue grafting enhancements include improving flap prevascularization and using stem cells and other cells to create not only the graft, but also the vascularization and soft tissue scaffolding for the graft. Hard tissue grafts have been enhanced by osteoinductive factors, such as bone morphogenic proteins, that have allowed the elimination of harvesting autogenous bone and thus decrease the need for other surgical sites.

Calcium release and physical properties of modified carbonate apatite cement as pulp capping agent in dental application.

Background: Carbonate apatite (COAp) and silica-calcium phosphate composite (SCPC) are bone substitutes with good prospect for dental application. SCPC creates a hydroxyapatite surface layer and stimulate bone cell function while, COAp induce apatite crystal formation with good adaptation providing good seal between cement and the bone. Together, these materials will add favorable properties as a pulp capping material to stimulate mineral barrier and maintain pulp vitality.

Novel Bioceramic Urethral Bulking Agents Elicit Improved Host Tissue Responses in a Rat Model.

Objectives. To test the physical properties and host response to the bioceramic particles, silica-calcium phosphate (SCPC10) and Cristobalite, in a rat animal model and compare their biocompatibility to the current clinically utilized urethral bulking materials. Material and Methods.

Acceleration of Alveolar Ridge Augmentation Using a Low Dose of Recombinant Human Bone Morphogenetic Protein-2 Loaded on a Resorbable Bioactive Ceramic.

Purpose: The aim of the present study was to evaluate the effect of a porous silica-calcium phosphate composite (SCPC50) loaded with and without recombinant human bone morphogenetic protein-2 (rhBMP-2) on alveolar ridge augmentation in saddle-type defects.

Materials And Methods: Micro-granules of SCPC50 resorbable bioactive ceramic were coated with rhBMP-2 10 mg and then implanted into a saddle-type defect (12 × 7 mm) in a dog mandible and covered with a collagen membrane. Control groups included defects grafted with SCPC50 granules without rhBMP-2 and un-grafted defects.

Rat animal model for preclinical testing of microparticle urethral bulking agents.

Objectives: To develop an economic, practical and readily available animal model for preclinical testing of urethral bulking therapies, as well as to establish feasible experimental methods that allow for complete analysis of hard microparticle bulking agents.

Methods: Alumina ceramic beads suspended in hyaluronic acid were injected into the proximal urethra of 15 female rats under an operating microscope. We assessed overall lower urinary tract function, bulking material intraurethral integrity and local host tissue response over time.

Early osteoblast responses to orthopedic implants: Synergy of surface roughness and chemistry of bioactive ceramic coating.

Pro-osteogenic stimulation of bone cells by bioactive ceramic-coated orthopedic implants is influenced by both surface roughness and material chemistry; however, their concomitant impact on osteoblast behavior is not well understood. The aim of this study is to investigate the effects of nano-scale roughness and chemistry of bioactive silica-calcium phosphate nanocomposite (SCPC50) coated Ti-6Al-4V on modulating early bone cell responses. Cell attachment was higher on SCPC50-coated substrates compared to the uncoated controls; however, cells on the uncoated substrate exhibited greater spreading and superior quality of F-actin filaments than cells on the SCPC50-coated substrates.

Tissue engineering scaffold for sequential release of vancomycin and rhBMP2 to treat bone infections.

The ability of silica calcium phosphate nanocomposite (SCPC75) for the controlled sequential delivery of vancomycin (Vanc) and rhBMP2 was evaluated. Fourier transform infrared spectroscopy analyses of the SCPC75 showed an increase in the bond energy of the PO4 (-3) due to the interactions with negatively charged moieties of Vanc. Furthermore, a decrease in the bond energy of the Si-O-Si functional groups was observed after rhBMP2 adsorption.

Alveolar ridge preservation using resorbable bioactive ceramic composite: a histological study.

Purpose: The purpose of this study was to histologically evaluate newly generated vital bone using porous granules of bioactive and resorbable silica-calcium phosphate nanocomposite (SCPC) in extraction sockets.

Material And Methods: Six patients with a non-restorable maxillary central incisor requiring extraction followed by implant placement participated in the study. Extraction sockets were grafted with granules of SCPC.

Mechanical properties and cytotoxicity of a resorbable bioactive implant prepared by rapid prototyping technique.

Bioceramic processing using rapid prototyping technique (RPT) results in a fragile device that requires thermal treatment to improve the mechanical properties. This investigation evaluates the effect of thermal treatment on the mechanical, porosity, and bioactivity properties as well as the cytotoxicity of a porous silica-calcium phosphate nanocomposite (SCPC) implant prepared by RPT. Porous SCPC implant was subject to 3-h treatment at 800°C, 850°C, or 900°C.

Promotion of pro-osteogenic responses by a bioactive ceramic coating.

The objective of this study was to analyze the responses of bone-forming osteoblasts to Ti-6Al-4V implant material coated with silica-calcium phosphate nanocomposite (SCPC50). Osteoblast differentiation at the interface with SCPC50-coated Ti-6Al-4V was correlated to the adsorption of high amount of serum proteins, high surface affinity to fibronectin, Ca uptake from and P and Si release into the medium. SCPC50-coated Ti-6Al-4V adsorbed significantly more serum protein (p < 0.

Machining of a bioactive nanocomposite orthopedic fixation device.

Bioactive ceramics bond to bone and enhance bone formation. However, they have poor mechanical properties which restrict their machinability as well as their application as load bearing implants. The goal of this study was to machine bioactive fixation screws using a silica-calcium phosphate nanocomposite (SCPC50).

Evaluation of a bioresorbable drug delivery system for the treatment of hepatocellular carcinoma.

Hepatocellular carcinoma (HCC) represents a major global health burden. Typically HCC responds poorly to chemotherapy, and such approaches to treat HCC are commonly associated with severe hepatic and/or systemic toxicity. The aim of this study was to evaluate a porous resorbable silica-calcium phosphate nanocomposite (SCPC) as a controlled release vehicle for cisplatin.

Electrophoretic deposition of bioactive silica-calcium phosphate nanocomposite on Ti-6Al-4V orthopedic implant.

Bioactive silica-calcium phosphate nanocomposite (SCPC) has been coated on Ti-6Al-4V implant employing an electrophoretic deposition (EPD) technique. The effects of composition and pH of the suspending medium on the zeta potential of three different SCPC formulations; SCPC25, SCPC50 and SCPC75 were analyzed. The average zeta potential of SCPC50 in pure ethanol was more negative than that of SCPC25 or SCPC75; however, the difference was not statistically significant.

Effects of exogenous phosphorus and silicon on osteoblast differentiation at the interface with bioactive ceramics.

In this study, we have investigated the effects of dissolved phosphorus and silicon on osteoblast differentiation in vitro. Neonatal rat calvarial osteoblasts were seeded on silica-calcium phosphate composites (SCPCS), hydroxyapatite (HA-200), and tissue culture polystyrene (TCPS) and incubated over 4 days in media containing 0 {minimal essential medium [MEM] (-)} or 3 mM β-glycerophosphate [MEM (+)]. Inductively coupled plasma analysis showed that P-content in original MEM (+) was 225% higher than that in MEM (-).

A ceramic-based anticancer drug delivery system to treat breast cancer.

Drug delivery systems offer the advantage of sustained targeted release with minimal side effect. In the present study, the therapeutic efficacy of a porous silica-calcium phosphate nanocomposite (SCPC) as a new delivery system for 5-Fluorouracil (5-FU) was evaluated in vitro and in vivo. In vitro studies showed that two formulations; SCPC50/5-FU and SCPC75/5-FU hybrids were very cytotoxic for 4T1 mammary tumor cells.

Resorbable bioactive ceramic for treatment of bone infection.

Polymethylmethacrylate (PMMA) beads have been widely used in the treatment of bone infection over the last three decades. Although PMMA does offer a mechanism to quickly and effectively administer a localized dose of antibiotic to the site of infection, its efficacy is limited by its nonresorbability and nonbioactivity. Resorbable bioactive silica-calcium phosphate nanocomposite (SCPC75) was investigated as a novel controlled release carrier of vancomycin for the treatment of osteomyelitis.

Effect of bioactive glass crystallization on the conformation and bioactivity of adsorbed proteins.

Protein adsorption onto the surface of a biomaterial mediates cell adhesion and enhances tissue-implant integration. In a previous study, we demonstrated that crystallization of bioactive glass (BG) significantly increased the negative zeta potential and decreased serum protein adsorption onto the material surface. In this study, the conformation of protein adsorbed onto the surface of amorphous bioactive glass (ABG) and crystallized bioactive glass (CBG) was analyzed and correlated to bone marrow mesenchymal stem cell adhesion and spreading.

Bone engineering of the rabbit ulna.

Purpose: The purpose of the present preliminary study is to show that a novel 3-dimensional porous silica-calcium phosphate nanocomposite (SCPC) can provide a controlled release of rhBMP-2 and regenerate bone in a load-bearing segmental defect.

Materials And Methods: A bone replica of the rabbit ulna was created from SCPC powder using rapid prototyping technology. The ceramic bone replica was coated with rhBMP-2 and then implanted into a 10-mm segmental defect created in a rabbit ulna and fixated with a 1-mm titanium adaptation plate.

Enhancement of osteoblast gene expression by mechanically compatible porous Si-rich nanocomposite.

Synthesis of a porous bioactive ceramic implant for load bearing applications is a challenging task in maxillofacial and orthopedic surgeries. A novel bioactive resorbable silica-calcium phosphate nanocomposite (SCPC) has recently been introduced as a potential bone graft. In the present study, we employed SCPC to develop a resorbable porous scaffold and analyzed the effects of composition and porosity on the mechanical properties.