Electrophoretic assisted fabrication of additive-free WS nanosheet anodes for high energy density lithium-ion batteries.

2D WS nanosheets (NSs) are gaining popularity in the domain of Li-ion batteries (LIBs) due to their unique structures, which can enable reversible insertion and extraction of alkali metal ions. While synthesis methods have mostly relied on the exfoliation of bulk materials or direct growth on substrates, here we report an alternative approach involving colloidal hot-injection synthesis of 2D WS in 2H and 1T' crystal phases followed by their electrophoretic deposition (EPD) on the current collector. The produced 2D WS NSs' films do not require any additional additives during deposition, which boosts the energy density of the additive-free LIBs produced.

Binder-Free Anodes for Potassium-ion Batteries Comprising Antimony Nanoparticles on Carbon Nanotubes Obtained Using Electrophoretic Deposition.

Antimony has a high theoretical capacity and suitable alloying/dealloying potentials to make it a future anode for potassium-ion batteries (PIBs); however, substantial volumetric changes, severe pulverization, and active mass delamination from the Cu foil during potassiation/depotassiation need to be overcome. Herein, we present the use of electrophoretic deposition (EPD) to fabricate binder-free electrodes consisting of Sb nanoparticles (NPs) embedded in interconnected multiwalled carbon nanotubes (MWCNTs). The anode architecture allows volume changes to be accommodated and prevents Sb delamination within the binder-free electrodes.

Si Nanowires: From Model System to Practical Li-Ion Anode Material and Beyond.

Nanowire (NW)-based anodes for Li-ion batteries (LIBs) have been under investigation for more than a decade, with their unique one-dimensional (1D) morphologies and ability to transform into interconnected active material networks offering potential for enhanced cycling stability with high capacity. This is particularly true for silicon (Si)-based anodes, where issues related to large volumetric expansion can be partially mitigated and the cycle life can be enhanced. In this Perspective, we highlight the trajectory of Si NWs from a model system to practical Li-ion battery anode material and future prospects for extension to beyond Li-ion batteries.

Revealing Seed-Mediated Structural Evolution of Copper-Silicide Nanostructures: Generating Structured Current Collectors for Rechargeable Batteries.

Metal silicide thin films and nanostructures typically employed in electronics have recently gained significant attention in battery technology, where they are used as active or inactive materials. However, unlike thin films, the science behind the evolution of silicide nanostructures, especially 1D nanowires (NWs), is a key missing aspect. CuSi nanostructures synthesized by solvent vapor growth technique are studied as a model system to gain insights into metal silicide formation.

Dual-chamber versus single chamber pacemakers, a systemic review and meta-analysis on sick sinus syndrome and atrioventricular block patients.

Aims: The atrioventricular block (AVB) is a conduction system problem that results from the impairment in the transmission of an impulse from the atria to the ventricle, the disease has many etiologies. This article aimed to evaluate the efficacy and safety of dual and single-chamber pacemakers in patients with SSS and AVB.

Methods: An electronic search of PubMed (Medline), EMBASE, and Google Scholar was performed from 2000 till August 15th, 2022.

Solution processable Si/Ge heterostructure NWs enabling anode mass reduction for practical full-cell Li-ion batteries.

Here, we report the solution phase synthesis of axial heterostructure Si and Ge (hSG) nanowires (NWs). The NWs were grown in a high boiling point solvent from a low-cost Sn powder to achieve a powder form product which represents an attractive route from lab-scale to commercial application. Slurry processed anodes of the NWs were investigated in half-cell ( Li-foil) and full-cell ( NMC811) configurations of a lithium ion battery (LIB).

Colloidal synthesis of the mixed ionic-electronic conducting NaSbS nanocrystals.

Solution-based synthesis of mixed ionic and electronic conductors (MIECs) has enabled the development of novel inorganic materials with implications for a wide range of energy storage applications. However, many technologically relevant MIECs contain toxic elements (Pb) or are prepared by using traditional high-temperature solid-state synthesis. Here, we provide a simple, low-temperature and size-tunable (50-90 nm) colloidal hot injection approach for the synthesis of NaSbS based MIECs using widely available and non-toxic precursors.

Usefulness of electrocardiography QT interval for prediction of left ventricular diastolic dysfunction: a cross-sectional study.

Unlabelled: Heart failure (HF) is a leading cause of morbidity and mortality worldwide, with projections showing a further rise in incidence, impacting a decline in quality of life and the costs incurred in its diagnosis and treatment. The authors aim to establish the correlation between the prediction of left ventricular diastolic dysfunction based on a change in QT wave intervals.

Methods: A cross-sectional at Holy-family Hospital, Rawalpindi Medical University, Pakistan.

Cu Current Collector with Binder-Free Lithiophilic Nanowire Coating for High Energy Density Lithium Metal Batteries.

Despite significant efforts to fabricate high energy density (ED) lithium (Li) metal anodes, problems such as dendrite formation and the need for excess Li (leading to low N/P ratios) have hampered Li metal battery (LMB) development. Here, the use of germanium (Ge) nanowires (NWs) directly grown on copper (Cu) substrates (Cu-Ge) to induce lithiophilicity and subsequently guide Li ions for uniform Li metal deposition/stripping during electrochemical cycling is reported. The NW morphology along with the formation of the Li Ge phase promotes uniform Li-ion flux and fast charge kinetic, resulting in the Cu-Ge substrate demonstrating low nucleation overpotentials of 10 mV (four times lower than planar Cu) and high Columbic efficiency (CE) efficiency during Li plating/stripping.

Lithiophilic Nanowire Guided Li Deposition in Li Metal Batteries.

Lithium (Li) metal batteries (LMBs) provide superior energy densities far beyond current Li-ion batteries (LIBs) but practical applications are hindered by uncontrolled dendrite formation and the build-up of dead Li in "hostless" Li metal anodes. To circumvent these issues, we created a 3D framework of a carbon paper (CP) substrate decorated with lithiophilic nanowires (silicon (Si), germanium (Ge), and SiGe alloy NWs) that provides a robust host for efficient stripping/plating of Li metal. The lithiophilic Li Si , Li (Si Ge ) and Li Ge formed during rapid Li melt infiltration prevented the formation of dead Li and dendrites.

Nanoporous membrane fabrication by nanoimprint lithography for nanoparticle sieving.

An isoporous membrane with strictly controlled pore size, shape and distribution could provide an efficient, precise and mild sieving of particles in nanotechnology and biomedical applications. However there is a lack of highly porous polymeric membranes combining isoporosity and high permeance in the range below 500 nm. Track-etched membranes are practically the only commercial option.

Temperature induced diameter variation of silicon nanowires a liquid-solid phase transition in the Zn seed.

Herein, we demonstrate the ability of Zn to catalyze the growth of Si nanowires reaction temperature determined, vapour-liquid-solid (VLS) or vapour-solid-solid (VSS) growth mechanisms. This is the first reported use of a type B catalyst to grow Si nanowires the VSS mechanism to our knowledge whereby the highly faceted Zn seeds resulted in an increased NW diameter. This was used to induce diameter variations along the axial length of individual nanowires by transitioning between VLS and VSS growth.

Bioengineering Progress in Lung Assist Devices.

Artificial lung technology is advancing at a startling rate raising hopes that it would better serve the needs of those requiring respiratory support. Whether to assist the healing of an injured lung, support patients to lung transplantation, or to entirely replace native lung function, safe and effective artificial lungs are sought. After 200 years of bioengineering progress, artificial lungs are closer than ever before to meet this demand which has risen exponentially due to the COVID-19 crisis.

Proof-of-Concept for Gas-Entrapping Membranes Derived from Water-Loving SiO2/Si/SiO2 Wafers for Green Desalination.

Desalination through direct contact membrane distillation (DCMD) exploits water-repellent membranes to robustly separate counterflowing streams of hot and salty seawater from cold and pure water, thus allowing only pure water vapor to pass through. To achieve this feat, commercial DCMD membranes are derived from or coated with water-repellent perfluorocarbons such as polytetrafluoroethylene (PTFE) and polyvinylidene difluoride (PVDF). However, the use of perfluorocarbons is limiting due to their high cost, non-biodegradability, and vulnerability to harsh operational conditions.

Rendering SiO2/Si Surfaces Omniphobic by Carving Gas-Entrapping Microtextures Comprising Reentrant and Doubly Reentrant Cavities or Pillars.

We present microfabrication protocols for rendering intrinsically wetting materials repellent to liquids (omniphobic) by creating gas-entrapping microtextures (GEMs) on them comprising cavities and pillars with reentrant and doubly reentrant features. Specifically, we use SiO2/Si as the model system and share protocols for two-dimensional (2D) designing, photolithography, isotropic/anisotropic etching techniques, thermal oxide growth, piranha cleaning, and storage towards achieving those microtextures. Even though the conventional wisdom indicates that roughening intrinsically wetting surfaces (θo < 90°) renders them even more wetting (θr < θo < 90°), GEMs demonstrate liquid repellence despite the intrinsic wettability of the substrate.

Giant Humidity Effect on Hybrid Halide Perovskite Microstripes: Reversibility and Sensing Mechanism.

Despite the exceptional performance of hybrid perovskites in photovoltaics, their susceptibility to ambient factors, particularly humidity, gives rise to the well-recognized stability issue. In the present work, microstripes of CHNHPbI are fabricated on flexible substrates, and they exhibit much larger response to relative humidity (RH) levels than continuous films and single crystals. The resistance of microstripes decreases by four orders of magnitude on changing the RH level from 10 to 95%.

Current-induced restructuring in bent silver nanowires.

A number of metallic one-dimensional nanostructures have been proposed as interconnects for next-generation electronic devices. Generally, reports on charge transport properties consider low current density regimes in nanowires (or nanotubes) with intrinsically straight configurations. In these circumstances, direct observations of the interconnecting nanofilament electrical failure are scarce, particularly for initially crooked structures.

Realizing High-Performance Li-Polysulfide Full Cells by using a Lithium Bis(trifluoromethanesulfonyl)imide Salt Electrolyte for Stable Cyclability.

Since concentrated electrolytes have attracted great attention for the stabilization of lithium-metal anodes for lithium-ion batteries, the demonstration of a full cell with an electrolyte concentration study has become a research topic of interest. Herein, we have demonstrated a proof of concept, a lithium-polysulfide full cell battery using various lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) electrolyte concentrations with glass-fiber-based composite and hard carbon as the cathode and anode, respectively. The initial capacity of the lithium-polysulfide full cell is found to be 970 mA h g at 0.

Unveiling the synergistic effect of polysulfide additive and MnO hollow spheres in evolving a stable cyclic performance in Li-S batteries.

Herein, we demonstrate a synergistic approach involving polar-based oxide and polysulfide additives for effectively suppressing polysulfide dissolution during cycling. The MnO hollow spheres not only provide physical confinement for the polysulfide species but also enable strong chemical interactions between polysulfide species and oxides, while the added polysulfide furnishes a mass buffering effect and compensates for the capacity losses due to partial cathode dissolution during discharge. The capacity retentions of S/KB, S/KB/LiPS, S/KB/MnO, and S/KB/MnO/LiPS composite cathodes are 31%, 45%, 59%, and 91% respectively.

Fabrication of highly modulable fibrous 3D extracellular microenvironments.

Three-dimensional (3D) in vitro scaffolds that mimic the irregular fibrous structures of in vivo extracellular matrix (ECM) are critical for many important biological applications. However, structural properties modulation of fibrous 3D scaffolds remains a challenge. Here, we report the first highly modulable 3D fibrous scaffolds self-assembled by high-aspect-ratio (HAR) microfibers.

Micro-Pseudocapacitors with Electroactive Polymer Electrodes: Toward AC-Line Filtering Applications.

In this study, we investigate the frequency response of micro-pseudocapacitors based on conducting polymer electrodes such as poly(3,4-ethylenedioxythiophene) (PEDOT), polypyrrole, and polyaniline. It is shown that by proper choice of polymeric material and device structure, miniaturized micro-pseudocapacitors can match the frequency response of commercial bulky electrolytic capacitors. Specifically, we show that PEDOT-based micro-pseudocapacitors exhibit phase angle of -80.

Design and fabrication of magnetically functionalized flexible micropillar arrays for rapid and controllable microfluidic mixing.

Magnetically functionalized PDMS-based micropillar arrays have been successfully designed, fabricated and implanted for controllable microfluidic mixing. The arrangement of PDMS micropillar arrays inside the microchannel can be flexibly controlled by an external magnetic field. As a consequence, the flow fields inside the microchannel can be regulated at will via magnetic activation conveniently.

Extraordinary mid-infrared transmission of subwavelength holes in gold films.

Gold (Au) nanoholes are fabricated with electron-beam lithography and used for the investigation of extraordinary transmission in mid-infrared regime. Transmission properties of the nanoholes are studied as the dependence on hole-size. Transmittance spectra are characterized by Fourier transform infrared spectroscopy (FTIR) and enhanced transmittance through the subwavelength holes is observed.

Surface-enhanced Raman scattering on gold nanotrenches and nanoholes.

Dependent effects on edge-to-edge distance and incidence polarization in surface-enhanced Raman Scattering (SERS) were studied in detection of 4-mercaptopyridine (4-MPy) molecules absorbed on gold nanotrenches and nanoholes. The gold nanostructures with controllable size and period were fabricated using electron-beam lithography. Large SERS enhancement in detection of 4-MPy molecules on both nanostructred substrates was observed.