Thermally-Activated Shape Memory Behavior of Biodegradable Blends Based on Plasticized PLA and Thermoplastic Starch.

Biodegradable blends based on plasticized poly(lactic acid) PLA and thermoplastic starch (TPS) have been obtained. The influence of the PLA plasticizer as a compatibility agent has been studied by using two different plasticizers such as neat oligomeric lactic acid (OLA) and functionalized with maleic acid (mOLA). In particular, the morphological, thermal, and mechanical properties have been studied as well as the shape memory ability of the melt-processed materials.

Compatibility of Sustainable Mater-Bi/poly(ε-caprolactone)/cellulose Biocomposites as a Function of Filler Modification.

Despite their popularity and multiplicity of applications, wood-polymer composites (WPCs) still have to overcome particular issues related to their processing and properties. The main aspect is the compatibility with plant-based materials which affects the overall performance of the material. It can be enhanced by strengthening the interfacial adhesion resulting from physical and/or chemical interactions between the matrix and filler, which requires introducing a compatibilizer or a proper modification of one or both phases.

The Evolution and Future Trends of Unsaturated Polyester Biocomposites: A Bibliometric Analysis.

Unsaturated polyester resin (UPR) is one of the first commercialized polymer matrices for composites reinforced with glass fibers, but has remained popular to this day. To reduce their environmental impact, natural fibers have been used as reinforcements. Researchers all over the world are still interested in these composites, and numerous papers have been published in the last four decades.

Nanostructuring Biobased Epoxy Resin with PEO-PPO-PEO Block Copolymer.

A biobased diglycidyl ether of vanillin (DGEVA) epoxy resin was nanostructured by poly(ethylene oxide-b-propylene oxide-b-ethylene oxide) (PEO-PPO-PEO) triblock copolymer. Due to the miscibility/immiscibility properties of the triblock copolymer in DGEVA resin, different morphologies were obtained depending on the triblock copolymer amount. A hexagonally packed cylinder morphology was kept until reaching 30 wt% of PEO-PPO-PEO content, while a more complex three-phase morphology was obtained for 50 wt%, in which large worm-like PPO domains appear surrounded by two different phases, one of them rich in PEO and another phase rich in cured DGEVA.

Sequential Crystallization and Multicrystalline Morphology in PE--PEO--PCL--PLLA Tetrablock Quarterpolymers.

We investigate for the first time the morphology and crystallization of two novel tetrablock quarterpolymers of polyethylene (PE), poly(ethylene oxide) (PEO), poly(ε-caprolactone) (PCL), and poly(l-lactide) (PLLA) with four potentially crystallizable blocks: PE PEO PCL PLLA (Q1) and PE PEO PCL PLLA (Q2) (superscripts give number average molecular weights in kg/mol, and subscripts give the composition in wt %). Their synthesis was performed by a combination of polyhomologation (C1 polymerization) and ring-opening polymerization techniques using a ″catalyst-switch″ strategy, either ″organocatalyst/metal catalyst switch″ (Q1 sample, 96% isotactic tetrads) or ″organocatalyst/organocatalyst switch″ (Q2 sample, 84% isotactic tetrads). Their corresponding precursors-triblock terpolymers PEPEOPCL, diblock copolymers PEPEO, and PE homopolymers-were also studied.

GTR/Thermoplastics Blends: How Do Interfacial Interactions Govern Processing and Physico-Mechanical Properties?

In this work, GTR/thermoplastics blends (in ratio 50/50 and 75/25 wt.%) were prepared by melt-compounding in an internal mixer. During research, trans-polyoctenamer rubber (TOR), ethylene-vinyl acetate copolymer (EVA), ethylene-octene copolymer (EOC), and linear low-density polyethylene (LLDPE), were used in their thermoplastic phase.

Semi-paracrystallinity in semi-conducting polymers.

Precise determination of structural organization of semi-conducting polymers is of paramount importance for the further development of these materials in organic electronic technologies. Yet, prior characterization of some of the best-performing materials for transistor and photovoltaic applications, which are based on polymers with rigid backbones, often resulted in conundrums in which X-ray scattering and microscopy yielded seemingly contradicting results. Here we solve the paradox by introducing a new structural model, , semi-paracrystalline organization.

Cost-Effectively 3D-Printed Rigid and Versatile Interpenetrating Polymer Networks.

Versatile acrylate-epoxy hybrid formulations are becoming widespread in photo/thermal dual-processing scenarios, especially in 3D printing applications. Usually, parts are printed in a stereolithography or digital light processing (DLP) 3D printer, after which a thermal treatment would bestow the final material with superior mechanical properties. We report the successful formulation of such a hybrid system, consisting of a commercial 3D printing acrylate resin modified by an epoxy-anhydride mixture.

Morphology, Thermo-Mechanical Properties and Biodegradibility of PCL/PLA Blends Reactively Compatibilized by Different Organic Peroxides.

Reactive blending is a promising approach for the sustainable development of bio-based polymer blends and composites, which currently is gaining more and more attention. In this paper, biodegradable blends based on poly(ε-caprolactone) (PCL) and poly(lactic acid) (PLA) were prepared via reactive blending performed in an internal mixer. The PCL and PLA content varied in a ratio of 70/30 and 55/45.

Bio-Based Polyurethane Networks Derived from Liquefied Sawdust.

The utilization of forestry waste resources in the production of polyurethane resins is a promising green alternative to the use of unsustainable resources. Liquefaction of wood-based biomass gives polyols with properties depending on the reagents used. In this article, the liquefaction of forestry wastes, including sawdust, in solvents such as glycerol and polyethylene glycol was investigated.

Degradability of Polyurethanes and Their Blends with Polylactide, Chitosan and Starch.

One of the methods of making traditional polymers more environmentally friendly is to modify them with natural materials or their biodegradable, synthetic equivalents. It was assumed that blends with polylactide (PLA), polysaccharides: chitosan (Ch) and starch (St) of branched polyurethane (PUR) based on synthetic poly([R,S]-3-hydroxybutyrate) (R,S-PHB) would degrade faster in the processes of hydrolysis and oxidation than pure PUR. For the sake of simplicity in the publication, all three modifiers: commercial PLA, Ch created by chemical modification of chitin and St are called bioadditives.

An Ideal Spin Filter: Long-Range, High-Spin Selectivity in Chiral Helicoidal 3-Dimensional Metal Organic Frameworks.

An enantiopure, conductive, and paramagnetic crystalline 3-D metal-organic framework (MOF), based on Dy(III) and the l-tartrate chiral ligand, is proved to behave as an almost ideal electron spin filtering material at room temperature, transmitting one spin component only, leading to a spin polarization (SP) power close to 100% in the ±2 V range, which is conserved over a long spatial range, larger than 1 μm in some cases. This impressive spin polarization capacity of this class of nanostructured materials is measured by means of magnetically polarized conductive atomic force microscopy and is attributed to the Chirality-Induced Spin Selectivity (CISS) effect of the material arising from a multidimensional helicity pattern, the inherited chirality of the organic motive, and the enhancing influence of Dy(III) ions on the CISS effect, with large spin-orbit coupling values. Our results represent the first example of a MOF-based and CISS-effect-mediated spin filtering material that shows a nearly perfect SP.

Hydrogels based on waterborne poly(urethane-urea)s by physically cross-linking with sodium alginate and calcium chloride.

Waterborne poly(urethane-urea)s (WPUUs) can be employed as a base for the preparation of new materials with novel properties and applications, such as hydrogels. In this work, sodium alginate (SA) was incorporated into WPUUs and their nanocomposites with TiO nanoparticles. The influence of the addition of SA and TiO nanoparticles on the final properties of WPUUs based hydrogels was investigated.

Predicted Studies of Branched and Cross-Linked Polyurethanes Based on Polyhydroxybutyrate with Polycaprolactone Triol in Soft Segments.

The number of cross-links in the non-linear polyurethane structure is the basic factor affecting its properties. Selected properties of aliphatic polyurethanes with soft segments made of different amounts of polycaprolactonetriol, polycaprolactonediol and synthetic, telechelic poly([R,S]-3-hydroxybutyrate) were determined. On the basis of changes in polyurethane properties, the correlation between these properties and the construction of soft segments was found.

Improvement of macroscale properties of TiO/cellulose acetate hybrid films by solvent vapour annealing.

Two different methods were employed for the preparation of cellulose triacetate (CTA) based nanocomposites without and with poly(ethylene oxide-b-propylene oxide-b-ethylene oxide) (EPE) triblock copolymer and modified with sol-gel synthesised titanium dioxide nanoparticles (TiO). The hybrid nanocomposites were prepared by solvent casting (SC) and solvent vapour annealing (SVA) methods. The hybrid nanocomposite films obtained by SVA presented smoother surfaces, and consequently, higher gloss values.

Morphology and Physicochemical Properties of Branched Polyurethane/Biopolymer Blends.

The aim of this study is the analyze the structure of branched polyurethanes based on synthetic poly([R,S]-3-hydroxybutyrate) and their blends with biopolymers and montmorillonite. The properties which would predict the potential susceptibility of these materials to degradation are also estimated. Fourier-transform infrared spectroscopy with attenuated total reflection analysis shows that poly([d,l]-lactide) is on the surfaces of polyurethanes, whereas chitosan and starch are included inside the blend network.

Nucleation and Crystallization of PA6 Composites Prepared by T-RTM: Effects of Carbon and Glass Fiber Loading.

Thermoplastic resin transfer molding (T-RTM) is attracting much attention due to the need for recyclable alternatives to thermoset materials. In this work, we have prepared polyamide-6 (PA6) and PA6/fiber composites by T-RTM of caprolactam. Glass and carbon fibers were employed in a fixed amount of 60 and 47 wt.

Improvement of Mechanical Properties and Self-Healing Efficiency by Ex-Situ Incorporation of TiO Nanoparticles to a Waterborne Poly(Urethane-Urea).

This research work was focused on the incorporation of TiO nanoparticles into synthesized solvent-free waterborne poly(urethane-urea) (WPUU) based on hydrophilic poly(ethylene oxide) (PU0) in order to improve both the mechanical properties and self-healing effectiveness of a polymer matrix. The incorporation of TiO nanoparticles resulted in a successful enhancement of the mechanical properties of nanocomposite films when compared to PU0. Simultaneously, the obtained nanocomposite films did not only maintain the self-healing ability of the PU0 film, measured by means of mechanical properties after successive cutting/recovery cycles, but they also showed a higher self-healing efficiency than the PU0 film.

Isothermal Crystallization Kinetics and Morphology of Double Crystalline PCL/PBS Blends Mixed with a Polycarbonate/MWCNTs Masterbatch.

In this work, the 70/30 and 30/70 w/w polycaprolactone (PCL)/polybutylene succinate (PBS) blends and their corresponding PCL/PBS/(polycarbonate (PC)/multiwalled carbon nanotubes (MWCNTs) masterbatch) nanocomposites were prepared in a twin-screw extruder. The nanocomposites contained 1.0 and 4.

Morphology, Nucleation, and Isothermal Crystallization Kinetics of Poly(Butylene Succinate) Mixed with a Polycarbonate/MWCNT Masterbatch.

In this study, nanocomposites were prepared by melt blending poly(butylene succinate) (PBS) with a polycarbonate (PC)/multi-wall carbon nanotubes (MWCNTs) masterbatch, in a twin-screw extruder. The nanocomposites contained 0.5, 1.

Flexible photochromic cellulose triacetate based bionanocomposites modified with sol-gel synthesized VO nanoparticles.

Transparent and flexible bionanocomposites with photochromic properties based on cellulose triacetate (CTA) and sol-gel synthesized VO nanoparticles were prepared. Poly(ethylene oxide-b-propylene oxide-b-ethylene oxide) (EPE) triblock copolymer was added to achieve nanostructured materials and simultaneously control the dispersion of synthesized VO nanoparticles. Investigated bionanocomposites were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), atomic force microscopy (AFM), tensile tests, and UV-vis spectroscopy.

Antireflective mesoporous silica coatings by optimization of water content in acid-catalyzed sol-gel method for application in glass covers of concentrated photovoltaic modules.

Porous silica layers with outstanding antireflective properties have been prepared by acid-catalyzed sol-gel process in presence of organic phases as structure directing agents (SDA) and excess water, with the aim of offering a cost-competitive, easy up-scaling and high efficiency process that contributes to reduce current levelized cost of energy (LCOE) of concentrating photovoltaics (CPV). The process has been optimized by controlling the water/alkoxide ratio, which is an important structure-regulating tool, having a strong influence in the structural properties of sol-gel synthesized materials. Hydrolysis of the inorganic precursor has been accomplished in high water/alkoxide conditions and in the presence of SDAs.

Morphology, Nucleation, and Isothermal Crystallization Kinetics of Poly(ε-caprolactone) Mixed with a Polycarbonate/MWCNTs Masterbatch.

In this study, nanocomposites were prepared by melt blending poly (ε-caprolactone) (PCL) with a (polycarbonate (PC)/multi-wall carbon nanotubes (MWCNTs)) masterbatch in a twin-screw extruder. The nanocomposites contained 0.5, 1.

Hydrothermal synthesis of bacterial cellulose-copper oxide nanocomposites and evaluation of their antimicrobial activity.

In this work, for the first time bacterial cellulose (BC) hydrogel membranes were used for the fabrication of antimicrobial cellulosic nanocomposites by hydrothermal deposition of Cu derivative nanoparticles (i.e.Cu(0) and CuxOy species).

Effect of in situ modification of bacterial cellulose with carboxymethylcellulose on its nano/microstructure and methotrexate release properties.

Bacterial cellulose/carboxymethylcelullose (BC/CMC) biocomposites with different DS-CMC (DS from 0.7 to 1.2) were developed in order to evaluate their impact as a drug delivery system.