Chromium (VI) Inhibition of Low pH Bioleaching of Limonitic Nickel-Cobalt Ore.

Limonitic layers of the regolith, which are often stockpiled as waste materials at laterite mines, commonly contain significant concentrations of valuable base metals, such as nickel, cobalt, and manganese. There is currently considerable demand for these transition metals, and this is projected to continue to increase (alongside their commodity values) during the next few decades, due in the most part to their use in battery and renewable technologies. Limonite bioprocessing is an emerging technology that often uses acidophilic prokaryotes to catalyse the oxidation of zero-valent sulphur coupled to the reduction of Fe (III) and Mn (IV) minerals, resulting in the release of target metals.

Size matters--The phototoxicity of TiO2 nanomaterials.

Under solar radiation several titanium dioxide nanoparticles (nano-TiO2) are known to be phototoxic for daphnids. We investigated the influence of primary particle size (10, 25, and 220 nm) and ionic strength (IS) of the test medium on the acute phototoxicity of anatase TiO2 particles to Daphnia magna. The intermediate sized particles (25 nm) showed the highest phototoxicity followed by the 10 nm and 220 nm sized particles (median effective concentrations (EC50): 0.

Earthworm Uptake Routes and Rates of Ionic Zn and ZnO Nanoparticles at Realistic Concentrations, Traced Using Stable Isotope Labeling.

The environmental behavior of ZnO nanoparticles (NPs), their availability to, uptake pathways by, and biokinetics in the earthworm Lumbricus rubellus were investigated using stable isotope labeling. Zinc isotopically enriched to 99.5% in (68)Zn ((68)Zn-E) was used to prepare (68)ZnO NPs and a dissolved phase of (68)Zn for comparison.

Influence of copper oxide nanoparticle shape on bioaccumulation, cellular internalization and effects in the estuarine sediment-dwelling polychaete, Nereis diversicolor.

CuO nanoparticles (NPs) released into the aquatic environment will likely accumulate in the sediment. Here we synthesized and characterized CuO NPs with different shapes and thus sizes: spheres, rods and spindles. Nereis diversicolor were exposed for 10 days to control sediment or sediment spiked with CuO NPs or aqueous Cu (Cu-Aq, CuCl2) at 7, 70 and 140 μg Cu g(-1) dw sediment.

Accumulation dynamics and acute toxicity of silver nanoparticles to Daphnia magna and Lumbriculus variegatus: implications for metal modeling approaches.

Frameworks commonly used in trace metal ecotoxicology (e.g., biotic ligand model (BLM) and tissue residue approach (TRA)) are based on the established link between uptake, accumulation and toxicity, but similar relationships remain unverified for metal-containing nanoparticles (NPs).

Fate and effects of metal-based nanoparticles in two marine invertebrates, the bivalve mollusc Scrobicularia plana and the annelid polychaete Hediste diversicolor.

The objective of this paper is to synthesize results from seven published research papers employing different experimental approaches to evaluate the fate of metal-based nanoparticles (Ag NPs, Au NPs, CuO NPs, CdS NPs, ZnO NPs) in the marine environment and their effects on two marine endobenthic species, the bivalve Scrobicularia plana and the ragworm Hediste diversicolor. The experiments were carried out under laboratory (microcosms) conditions or under environmentally realistic conditions in outdoor mesocosms. Based on results from these seven papers, we addressed the following research questions: (1) How did the environment into which nanoparticles were released affect their physicochemical properties?, (2) How did the route of exposure (seawater, food, sediment) influence bioaccumulation and effects?, (3) Which biomarkers were the most responsive? and (4) Which tools were the most efficient to evaluate the fate and effects of NPs in the marine environment? The obtained results showed that metal-based NPs in general were highly agglomerated/aggregated in seawater.

In vivo retention of ingested Au NPs by Daphnia magna: no evidence for trans-epithelial alimentary uptake.

In vivo studies with Daphnia magna remain inconclusive as to whether engineered nanoparticles (NPs) are internalized into tissues after ingestion. Here we used a three-pronged approach to study the in vivo retention and efflux kinetics of 20 nm citrate stabilized Au NPs ingested by this key aquatic species. Daphnids were exposed to suspended particles (600 μg L(-1)) for 5 h after which they were depurated for 24 h in clean water containing algae.

Interlaboratory comparison of size measurements on nanoparticles using nanoparticle tracking analysis (NTA).

One of the key challenges in the field of nanoparticle (NP) analysis is in producing reliable and reproducible characterisation data for nanomaterials. This study looks at the reproducibility using a relatively new, but rapidly adopted, technique, Nanoparticle Tracking Analysis (NTA) on a range of particle sizes and materials in several different media. It describes the protocol development and presents both the data and analysis of results obtained from 12 laboratories, mostly based in Europe, who are primarily QualityNano members.

Elucidation of toxicity pathways in lung epithelial cells induced by silicon dioxide nanoparticles.

A study into the effects of amorphous nano-SiO2 particles on A549 lung epithelial cells was undertaken using proteomics to understand the interactions that occur and the biological consequences of exposure of lung to nanoparticles. Suitable conditions for treatment, where A549 cells remained viable for the exposure period, were established by following changes in cell morphology, flow cytometry, and MTT reduction. Label-free proteomics was used to estimate the relative level of proteins from their component tryptic peptides detected by mass spectrometry.

Stable isotope tracer to determine uptake and efflux dynamics of ZnO Nano- and bulk particles and dissolved Zn to an estuarine snail.

Zinc oxide nanoparticles (ZnO NPs) are among the most commercialized engineered nanomaterials. Their biological impact in aquatic organisms has been associated with dissolution, but there is also evidence of nanospecific effects. In this study the waterborne uptake and efflux kinetics of isotopically labeled (68)ZnO NPs (7.

Comparative study using spheres, rods and spindle-shaped nanoplatelets on dispersion stability, dissolution and toxicity of CuO nanomaterials.

Copper oxide nanoparticles with different shapes were used to examine the effect of shape on the various physicochemical properties (reactivity, aggregation, suspension stability) and to examine the behaviour by which CuO nanoparticles exhibit their biological response towards alveolar type-I cells. The different shapes examined in this study include spherical-, rod- and spindle-shaped platelet particles. In vitro dissolution studies (7 days) in 1 mM NaNO3 matrix showed a marked difference in dissolved Cu release between the nanoparticles.

Bioaccumulation, toxicokinetics, and effects of copper from sediment spiked with aqueous Cu, nano-CuO, or micro-CuO in the deposit-feeding snail, Potamopyrgus antipodarum.

The present study examined the relative importance of copper (aqueous Cu and CuO particles of different sizes) added to sediment to determine the bioaccumulation, toxicokinetics, and effects in the deposit feeder Potamopyrgus antipodarum. In experiment 1, the bioaccumulation of Cu (240 µg Cu/g dry wt of sediment) added as aqueous Cu (CuCl2 ), nano- (6 nm, 100 nm), or micro- (<5 µm) CuO particles in adult snails was measured. In experiment 2, a more comprehensive analysis of the toxicokinetics of Cu (aqueous Cu, 6 nm, or 100 nm) was conducted.

Tracing bioavailability of ZnO nanoparticles using stable isotope labeling.

Zinc oxide nanoparticles (ZnO NPs) are widely used in commercial products and knowledge of their environmental fate is a priority for ecological protection. Here we synthesized model ZnO NPs that were made from and thus labeled with the stable isotope (68)Zn and this enables highly sensitive and selective detection of labeled components against high natural Zn background levels. We combine high precision stable isotope measurements and novel bioimaging techniques to characterize parallel water-borne exposures of the common mudshrimp Corophium volutator to (68)ZnO NPs, bulk (68)ZnO, and soluble (68)ZnCl(2) in the presence of sediment.

The complexity of nanoparticle dissolution and its importance in nanotoxicological studies.

Dissolution of nanoparticles (NPs) is an important property that alters their abundance and is often a critical step in determining safety of nanoparticles. The dissolution status of the NPs in exposure media (i.e.

Fate of isotopically labeled zinc oxide nanoparticles in sediment and effects on two endobenthic species, the clam Scrobicularia plana and the ragworm Hediste diversicolor.

Although it is reported that metal and metal oxide nanoparticles, which are among the most rapidly commercialized materials, can cause toxicity to organisms, their fate in the environment and toxicity to marine organisms are not well understood. In this study, we used a stable isotope labelling approach to trace the fate of nanoparticles (NPs) in sediments and also investigated bio-uptake in two estuarine intra-sedimentary invertebrates Scrobicularia plana and Nereis diversicolor. We selected exposure to 3 mg kg(-1) sediment ZnO NPs since this level is a realistic prediction of the environmental concentration in sediments.

The dissolution rates of SiO2 nanoparticles as a function of particle size.

There is a critical need to better define the relationship among particle size, surface area, and dissolution rate for nanoscale materials to determine their role in the environment, their toxicity, and their technological utility. Although some previous studies concluded that nanoparticles dissolve faster than their bulk analogs, contradictory evidence suggests that nanoparticles dissolve more slowly. Furthermore, insufficient characterization of the nanoparticulate samples and the solution chemistry in past studies obscures the relationship between particle size, surface area, and dissolution rate.

Isotopically modified nanoparticles for enhanced detection in bioaccumulation studies.

This work presents results on synthesis of isotopically enriched (99% (65)Cu) copper oxide nanoparticles and its application in ecotoxicological studies. (65)CuO nanoparticles were synthesized as spheres (7 nm) and rods (7 × 40 nm). Significant differences were observed between the reactivity and dissolution of spherical and rod shaped nanoparticles.

Effects of sediment-associated copper to the deposit-feeding snail, Potamopyrgus antipodarum: a comparison of Cu added in aqueous form or as nano- and micro-CuO particles.

Increasing use of engineered nanoparticles (NPs) is likely to result in release of these particles to the aquatic environment where the NPs may eventually accumulate in sediment. However, little is known about the potential ecotoxicity of sediment-associated engineered NPs. We here consider the case of metal oxide NPs using CuO to understand if the effects of NPs differ from micron-sized particles of CuO and aqueous Cu (CuCl₂).

A novel approach reveals that zinc oxide nanoparticles are bioavailable and toxic after dietary exposures.

If engineered nanomaterials are released into the environment, some are likely to end up associated with the food of animals due to aggregation and sorption processes. However, few studies have considered dietary exposure of nanomaterials. Here we show that zinc (Zn) from isotopically modified (67)ZnO particles is efficiently assimilated by freshwater snails when ingested with food.

Synthesis of isotopically modified ZnO nanoparticles and their potential as nanotoxicity tracers.

Understanding the behavior of engineered nanoparticles in the environment and within organisms is perhaps the biggest obstacle to the safe development of nanotechnologies. Reliable tracing is a particular issue for nanoparticles such as ZnO, because Zn is an essential element and a common pollutant thus present at elevated background concentrations. We synthesized isotopically enriched (89.

Characterisation of carbon nanotubes in the context of toxicity studies.

Nanotechnology has the potential to revolutionise our futures, but has also prompted concerns about the possibility that nanomaterials may harm humans or the biosphere. The unique properties of nanoparticles, that give them novel size dependent functionalities, may also have the potential to cause harm. Discrepancies in existing human health and environmental studies have shown the importance of good quality, well-characterized reference nanomaterials for toxicological studies.

An evaluation of the reactivity of synthetic and natural apatites in the presence of aqueous metals.

Metal removal from contaminated effluents was examined following reaction with natural apatites of biological and geological origin or a synthetic hydroxylapatite (HAP). Mammalian meat and bone meal (MBM), a by-product from meat industry, was the biological apatite source. The effect of incineration on metal removal capacity of MBM and HAP was also examined.

Arsenic pollution sources.

Arsenic is a widely dispersed element in the Earth's crust and exists at an average concentration of approximately 5 mg/kg. There are many possible routes of human exposure to arsenic from both natural and anthropogenic sources. Arsenic occurs as a constituent in more than 200 minerals, although it primarily exists as arsenopyrite and as a constituent in several other sulfide minerals.

Remediation strategies for historical mining and smelting sites.

The environmental, social and economic problems associated with abandoned mine sites are serious and global. Environmental damage arising from polluted waters and dispersal of contaminated waste is a feature characteristic of many old mines in North America, Australia, Europe and elsewhere. Today, because of the efficiency of mining operations and legal requirements in many countries for prevention of environmental damage from mining operations, the release of metals to the environment from modern mining is low.