Chemical Studies of Multicomponent Kidney Stones Using the Modern Advanced Research Methods.

Defining the kidney stone composition is important for determining a treatment plan, understanding etiology and preventing recurrence of nephrolithiasis, which is considered as a common, civilization disease and a serious worldwide medical problem. The aim of this study was to investigate the morphology and chemical composition of multicomponent kidney stones. The identification methods such as infrared spectroscopy (FTIR), X-ray diffraction (XRD), and electron microscopy with the EDX detector were presented.

Elemental mapping of human teeth enamel, dentine and cementum in view of their microstructure.

This paper presents a detailed analysis to directly compare the morphology and chemistry of human tooth layers using advanced scanning electron microscopy (SEM) techniques together with supporting data from energy dispersive spectroscopy (EDS) measurements. The aim of this study was to visualise and evaluate the structural and microanalytical differences of the mineralised hard tissues of human teeth. The extracted sound teeth without any pathologies were divided into the following groups: incisors, canines, premolars, and molars.

Trace Elements and Heavy Metal Contents in West Algerian Natural Honey.

Analysis of trace elements and heavy metals in honey is essential for honey quality and safety and also monitoring environmental pollution. This study aimed to evaluate the composition of thirty-seven honey samples of different botanical origins (14 multifloral and 23 unifloral) obtained from beekeepers located in the west region of Algeria. Inductively coupled plasma-mass spectrometry (ICP-MS) and atomic absorption spectroscopy (AAS) methods were used to determine the levels of 19 elements in honey (K, Na, Ca, Mg, Mn, Cu, Fe, Zn, V, Cr, Co, As, Ru, Rh, Cd, W, Pt, Au, and Pb).

Effect of Different Minerals on Water Stability and Wettability of Soil Silt Aggregates.

Knowledge on the effects of minerals on soil water stability and wettability is mostly gained from experiments on natural soils of different mineral composition. To gain a "clearer" picture, the water stability and wettability of artificial aggregates composed of soil silt and various proportions of pure minerals: kaolinite, montmorillonite, illite, zeolite and goethite, were examined. The wettability was attributed to contact angles measured goniometrically and to the water drop penetration time (WDPT).

Impact of Chitosan on the Mechanical Stability of Soils.

Chitosan is becoming increasingly applied in agriculture, mostly as a powder, however little is known about its effect on soil mechanical properties. Uniaxial compression test was performed for cylindrical soil aggregates prepared from four soils of various properties (very acidic Podzol, acidic Arenosol, neutral Fluvisol and alkaline Umbrisol) containing different proportions of two kinds of chitosan (CS1 of higher molecular mass and lower deacetylation degree, and CS2 of lower molecular mass and higher deacetylation degree), pretreated with 1 and 10 wetting-drying cycles. In most cases increasing chitosan rates successively decreased the mechanical stability of soils that was accompanied by a tendential increase in soil porosity.

Impact of Chitosan on Water Stability and Wettability of Soils.

Chitosan has become increasingly applied in agriculture worldwide, thus entering the soil environment. We hypothesized that chitosan should affect the water stability of soil. Since this problem has not been studied to date, we examined, for the first time, the influence of chitosan on the water stability and wettability of soil aggregates.

The Efficacy of a Diode Laser on Titanium Implants for the Reduction of Microorganisms That Cause Periimplantitis.

The paper presents the optimisation of a safe diode laser irradiation process applied to the surface of titanium implants in order to reduce microbial numbers in the treatment of inflammation classified as periimplantitis. The study comprised isolation and identification of microorganisms inhabiting surfaces of dental implants, crowns, teeth and saliva from patients with fully symptomatic periimplantitis. Microorganisms were detected by a culture-dependent method and identified with the use of MALDI-TOF mass spectrometry.

The Use of a Diode Laser for Removal of Microorganisms from the Surfaces of Zirconia and Porcelain Applied to Superstructure Dental Implants.

The aim of this paper was to study the effectiveness of a diode laser (LD) for removal of microorganisms isolated from porcelain and zirconia crown surfaces used in implantoprosthetics in order to minimize infections around dental implants. In order to optimize biocidal efficacy of the process (at the same time, avoiding increasing the surface roughness during decontamination) the effects of diode laser doses were investigated. The irradiation was performed with a diode laser at the wavelength of λ = 810 nm in three variants with a different number of repetitions (1 × 15 s, 2 × 15 s, 3 × 15 s).

Structure and Strength of Artificial Soils Containing Monomineral Clay Fractions.

Structure and strength are responsible for soil physical properties. This paper determines in a uniaxial compression test the strength of artificial soils containing different proportions of various clay-size minerals (cementing agents) and silt-size feldspar/quartz (skeletal particles). A novel empirical model relating the maximum stress and the Young's modulus to the mineral content basing on the Langmuir-type curve was proposed.

Growth performance and meat quality of meat-type guinea fowl fed different commercial diets.

The aim of study was to assess the growth performance, meat quality, and fatty acid composition of meat-type guinea fowl fed balanced commercial diets under two different feeding programs, similar to those for slaughter turkeys and broiler chickens, respectively. A total of 80 4-week-old meat-type guinea fowl divided into two groups (four replicates per group; 10 birds in each replicate) were raised for 14 weeks. One group received commercially available diets in a three-phased program (TM group), whereas the other group was fed commercial diets in a two-phased program (CM group).

Breakage Strength of Wood Sawdust Pellets: Measurements and Modelling.

Wood pellets are an important source of renewable energy. Their mechanical strength is a crucial property. In this study, the tensile strength of pellets made from oak, pine, and birch sawdust with moisture contents of 8% and 20% compacted at 60 and 120 MPa was determined in a diametral compression test.

Studies on the Mechanism of Cu(II) Ion Sorption on Purolite S 940 and Purolite S 950.

The aim of the presented research was to investigate the mechanism of sorption of Cu(II) ions on the commercially available Purolite S 940 and Purolite S 950 chelating ion exchangers with the aminophosphonic functional groups. In order to understand better the sorption mechanism, the beads were cut with an ultramicrotome before and after the Cu(II) ion sorption process. The cut beads were examined by scanning electron microscopy (SEM) with an EDX detector.

Effect of Low Zeolite Doses on Plants and Soil Physicochemical Properties.

Thousands of tons of zeolitic materials are used yearly as soil conditioners and components of slow-release fertilizers. A positive influence of application of zeolites on plant growth has been frequently observed. Because zeolites have extremely large cation exchange capacity, surface area, porosity and water holding capacity, a paradigm has aroused that increasing plant growth is caused by a long-lasting improvement of soil physicochemical properties by zeolites.

The Variability of Quality Traits of Table Eggs and Eggshell Mineral Composition Depending on Hens' Breed and Eggshell Color.

The aim of the study was to evaluate the relationship between the eggshell color parameters and its mineral composition as well as the internal quality of eggs derived from various breeds of hens, varied by eggshell color: seledine from Araucana, brown from Marans, and white from Leghorn. The sample consisted of 180 eggs (60/group) The eggshell color was measured using CIE L*a*b* system. The quality evaluation included traits of whole egg (weight, specific gravity, proportions of elements, shape index), yolk (weight, color, index, pH), albumen (weight, height, pH), and shell (color, strength, weight, thickness, density).

Assessment of Concentrations of Heavy Metals in Postmyocardial Infarction Patients and Patients Free from Cardiovascular Event.

Cardiovascular diseases (CVDs) constitute the first cause of death among the population of developing and developed countries. Atherosclerosis, which is a disorder with multifactorial etiopathogenesis, underlies most CVDs. The available literature includes ample research studies on the influence of classic cardiovascular (CV) risk factors.

Arsenate Adsorption on Fly Ash, Chitosan and Their Composites and Its Relations with Surface, Charge and Pore Properties of the Sorbents.

One of the ways to recycle millions of tons of fly ash and chitin wastes produced yearly is their utilization as low-cost sorbents, mainly for heavy metal cations and organic substances. To improve their sorption efficiency, fly ashes have been thermally activated or modified by chitosan. We aimed to deeply characterize the physicochemical properties of such sorbents to reveal the usefulness of modification procedures and their effect on As(V) adsorption.

Fatty acids profile, cholesterol level and quality of table eggs from hens fed with the addition of linseed and soybean oil.

The study objective was to assess the impact of soybean (SO) and linseed oil (LO) added to feed mixture for laying hens upon the quality characteristics of table eggs, their fatty acid (FA) profile and cholesterol level. The material consisted of eggs from hens fed with a mixture without oil and with the addition of LO or SO in a dose of 2.5%.