Bleaching efficacy of in-office bleaching with violet light using low-concentration hydrogen peroxide nanoparticulate photocatalyst gel: A randomized controlled trial.

Objective: This randomized controlled trial aimed to evaluate the bleaching efficacy and tooth sensitivity (TS) of participants submitted to different application protocols of in-office bleaching with violet light using 6 % hydrogen peroxide (HP) nanoparticulate photocatalyst gel.

Materials And Methods: Sixty-six participants were randomized and bleached using either a 6 % HP (Nano White, DMC), and/or violet light (Bright Max Whitening, MMOptics), according to the following protocols: 1) only violet light (VIOL); 2) only bleaching gel application (BG) and; 3) combined bleaching gel application + violet light (BG+VIOL). The bleaching efficacy was evaluated with the Vita Easyshade spectrophotometer, Vita Classical and Vita Bleachedguide scales.

Fabrication and characterization of physically crosslinked alginate/chitosan-based hydrogel loaded with neomycin for the treatment of skin infections caused by Staphylococcus aureus.

Staphylococcus aureus is a pathogen widely involved in wound infection due to its ability to release several virulence factors that impair the skin healing process, as well as its mechanism of drug resistance. Herein, sodium alginate and chitosan were combined to produce a hydrogel for topical delivery of neomycin to combat S. aureus associated with skin complications.

Evaluation of Microbiological Susceptibility and Long-term Adhesive Properties to Dentin of Primers with Terminalia catappa Linn.

Purpose: To investigate the antibacterial effects of Terminalia catappa Linn (TCL) leaf extracts at different concentrations and the effects of these extracts used as primers on the long-term adhesive properties of two universal adhesives.

Materials And Methods: After extract preparation, the antimicrobial and antibacterial activities of TCL against Streptococcus mutans (UA 159) were assessed in microdilution assays to provide the minimal inhibitory concentration (MIC) and minimal bactericidal concentration (MBC). Additionally, to provide quantitative data on the ability of TCL extract to reduce cell viability, colony forming units (CFU) were counted.

Effect of silver diamine fluoride on the longevity of the bonding properties to caries-affected dentine.

Objectives: This study aimed to evaluate the adhesive properties in dentine after the application of silver diamine fluoride (SDF) on carious dentine lesions immediately and after 2 years of water storage.

Methods: 96 human molars used were subjected to artificial dentine caries production, and then randomly divided into 12 experimental groups according to 1. application of an SDF solution (carious dentine lesion without SDF treatment [control], with 12 % silver diamine fluoride [SDF 12 %] or 38 % silver diamine fluoride [SDF 38 %]); 2.

Prolonged application time effects on universal adhesives in non-carious cervical lesions: An 18-month split mouth randomized clinical trial.

Objective: This double-blind, split mouth randomized clinical trial aimed to assess the clinical performance of Clearfil Universal Bond Quick (CBUq) universal adhesive under different application times (no waiting and waiting) compared to Clearfil SE Bond adhesive in non-carious cervical lesions (NCCLs) over 18 months.

Methods: One hundred and eighty-three restorations were distributed randomly into three groups based on the adhesive system and waiting time: CUBq without waiting time (CUBq-NW), CUBq with a 20 s waiting time (CUBq-W), and CSE with a 20 s waiting time. After placement, restorations were evaluated after 18 months using the International Dental Federation (FDI) and United States Public Health Service (USPHS) criteria.

Does the application of dimethyl sulfoxide improve resin bonding to eroded dentine? Four-year in vitro evaluation.

Objective: To evaluate the effect of dimethyl sulfoxide (DMSO) on the microtensile bond strength (µTBS) and nanoleakage (NL) of universal adhesives on eroded dentine, immediately and after four years of water storage.

Methods: Sixty-four sound human molars were distributed into 16 groups according to (1) Dentine surface (sound and eroded dentine); (2) dimethyl sulfoxide application (with or without); (3) Application mode (etch-and-rinse or self-etch) and (4) Storage time (immediate and four years). One mild universal adhesive was used (Scotchbond Universal).

Effect of the Absence of HEMA on the Bonding Properties of Universal Adhesive Systems Containing 10-MDP: An In Vitro Study.

Objectives: To evaluate the absence of 2-hydroxyethyl methacrylate (HEMA) on the adhesive properties with enamel and dentin of universal adhesive systems containing 10-methacryloyloxydecyl dihydrogen phosphate (MDP).

Methods And Materials: One hundred and twelve caries-free third molars were used to test adhesion to dentin (n=64) and enamel (n=48). For each substrate, teeth were divided into eight experimental groups: four different adhesives each using two adhesive strategies.

Bonding performance of universal adhesives to eroded dentine: A 6-year evaluation.

Objectives: To evaluate the microtensile bond strength (µTBS) and nanoleakage (NL) of several universal adhesives to eroded dentine (ED) using etch-and-rinse (ER) and self-etch (SE) strategies, immediately and after 6 years of water storage.

Material And Methods: Four hundred and eighty human molars were distributed into 60 groups according to dentine substrate (sound dentine [SD], eroded with soft drink, or eroded with citric acid), application method of the adhesive (SE or ER), and the adhesives used: 1. All-Bond Universal, 2.

Effect of irradiance and exposure time on the adhesive properties of universal adhesives after 2 years of storage.

Objective: This study aims to evaluate the effects of exposure time and irradiance on the dentin bonding properties (microtensile bond strength (μTBS) and nanoleakage (NL)) of the Clearfil Universal Bond Quick (CUQ) adhesive and Scotchbond Universal Adhesive (SBU) immediately and after 2 years of water storage.

Material And Methods: Hence, 128 human molars were randomly assigned to 16 groups based on adhesive strategy, irradiance/exposure times, and storage time for each universal adhesive tested. The adhesives were applied using the etch-and-rinse and self-etch strategies and were light-cured using four different irradiance/exposure times: 1400 mW/cm for 5 s (1400 × 5), 1400 mW/cm for 10 s (1400 × 10), 3200 mW/cm for 5 s (3200 × 5), and 3200 mW/cm for 10 s (3200 × 10).

Perception of malocclusion and school performance in adolescents: a systematic review.

This study aimed to assess the potential association between perception malocclusion and school performance in children and adolescents. An electronic search was performed in ten databases. Based on the PECO acronym (Population, Exposition, Comparator, and Outcome), the eligibility criteria included observational studies that compared the school performance of children and adolescents with and without the perception of malocclusion.

Long-term Evaluation of Bonding Performance of Universal Adhesives based on Different Dentinal Moisture Levels.

Purpose: To evaluate the microtensile bond strength (μTBS) and silver nitrate uptake (SNU) of three universal adhesives used in etch-and-rinse (ER) and self-etch (SE) modes on dry, wet, and oversaturated dentin surfaces after 24 h and 1 year of water storage. The morphology of the hybrid layer (MHL) and the degree of conversion (DC) were also evaluated.

Materials And Methods: Human molars were divided into 36 groups according to combinations of the following variables: (i) universal adhesives (Ambar Universal APS [AMB], Prime&Bond Active [PBA], Scotchbond Universal Adhesive [SBU]), (ii) adhesive strategies (ER or SE), (iii) moisture level (dry, wet, or oversaturated dentin surface), and (iv) storage time (24 h or 1 year).

Effect of the Viscosity and Application Time of Different Phosphoric Acids on the Bond Strength and Nanoleakage of Fiber Posts to Root Dentin.

Purpose: To evaluate the effect of application time and viscosity of meta-phosphoric acid (MPA) and ortho-phosphoric acid (OPA) on the push-out resin-dentin bond strength (PBS) and nanoleakage (NL) at the adhesive-root dentin interface.

Methods And Materials: Ninety-six roots of premolars were endodontically prepared and randomly assigned into groups according to the (i) acid (OPA and MPA), (ii) viscosity (gel and liquid), and (iii) application time (7 and 15 seconds). Fiber posts were cemented to the roots, which were then transversally sectioned into serial slices.

Development and Physicochemical Characterization of Essential Oil-Doped Dental Adhesives with Antimicrobial Action towards .

Dental caries is a multifactorial, biofilm-dependent infectious disease that develops when detrimental changes occur in the oral cavity microenvironment. The antimicrobial and antivirulence properties of the essential oil obtained from the leaves of Eugenia brejoensis Mazine (EBEO) have been reported against Gram-positive and Gram-negative bacteria. Herein, the antimicrobial action of EBEO towards Streptococcus mutans is reported, along with the development and characterization of dental adhesives doped with.

Effect of Bonding Protocols on the Performance of Luting Agents Applied to CAD-CAM Composites.

This in vitro study aimed to evaluate the effect of different bonding strategies on the micro-shear bond strength (μSBS) of luting agents to CAD−CAM composites. Surface scanning electron microscopy (SEM) and spectroscopy by energy-dispersive X-ray spectroscopy (EDS) were performed to analyze the surfaces of the composite before and after bonding treatment. Three CAD−CAM composites were evaluated: Lava Ultimate restorative (LU), Brava Blocks (BR), and Vita Enamic (VE).

Eighteen-month clinical evaluation of a new universal adhesive applied in the "no-waiting" technique: a randomized clinical trial.

Objective: The aim of this double-blind, randomized clinical trial was to evaluate the 6- and 18-month clinical performances of a new universal adhesive applied in the "no-waiting" (NW) technique to non-carious cervical lesions (NCCLs) using two evaluation criteria.

Materials And Methods: One hundred and seventy-six restorations were assigned to four groups according to the adhesive system, adhesive strategy, and application mode: Prime&Bond Active (PB) applied using the etch-and-rinse (ER) and self-etch (SE) strategies with 20 s applications and Clearfil Universal Bond Quick (CQ) applied using the ER and SE strategies with the NW technique. The composite resin restorations were evaluated at baseline and after 6 and 18 months using the World Dental Federation (FDI) and US Public Health Service (USPHS) criteria.

Influence of Irradiance and Exposure Times on the Mechanical and Adhesive Properties of Universal Adhesives with Dentin.

Objectives: This study evaluated the influence of irradiance/exposure time on the Knoop hardness (KHN) and polymer cross-linking density (PCLD), as well as microtensile bond strength (μTBS), nanoleakage (NL), and in situ degree of conversion (DC) of universal adhesives.

Methods And Materials: Two universal adhesive systems, Clearfil Universal Bond Quick (CUQ) and Scotchbond Universal Adhesive (SBU), were light-cured using various irradiance/exposure times: 1400 mW/cm2 for 5 s (1400*5); 1400 mW/cm2 for 10 s (1400*10); 3200 mW/cm2 for 5 s (3200*5); and 3200 mW/cm2 for 10 s (3200*10). Adhesive disks from each group were used to measure PCLD by KHN.

Does the Application of Additional Hydrophobic Resin to Universal Adhesives Increase Bonding Longevity of Eroded Dentin?

This paper evaluates the effect of an additional hydrophobic resin coat (extra HL) associated with universal adhesives on sound and eroded dentin and evaluated immediately or after 2 years of water storage to improve the microtensile bond strength (μTBS) and nanoleakage (NL) when compared to the use of universal adhesives only. Sixty-four molars were assigned to eight groups using the following combinations: 1. dentin substrate, including sound and eroded dentin; 2.

Bonding Efficacy of Universal Adhesives to Fluorotic Enamel after Pre-conditioning with EDTA.

Purpose: To compare the effect of active pre-conditioning with 17% ethylenediaminetetraacetic acid (EDTA) vs 37% phosphoric acid (PA) on the resin-enamel microshear bond strength (µSBS), enamel-etching pattern, and in situ degree of conversion (in situ DC) of four universal adhesives on sound and fluorotic enamel.

Material And Methods: In this study, 448 extracted human molars (224 without fluorosis and 224 with fluorosis) were sectioned into four parts and divided into 16 experimental groups based on the enamel surface (sound or fluorotic enamel), adhesive (Clearfil Universal Bond [CUB], Futurabond U [FBU], iBond Universal [IBU], or Scotchbond Universal [SBU]), and enamel conditioning agent (PA or EDTA). The specimens were stored for 24 h and tested under shear stress at 1.

Effects of Adjacent Tooth Type and Occlusal Fatigue on Proximal Contact Force of Posterior Bulk Fill and Incremental Resin Composite Restoration.

Objectives: To measure the proximal contact force in newtons (N) between incremental and bulk fill class II resin composite restorations and implant molar teeth or adjacent premolar teeth with simulated periodontal ligament.

Methods: The model used was created with a typodont first molar tooth with two bilateral occlusal-proximal class II cavities, an adjacent tooth simulating an implanted molar tooth (Titamax CM, Neodent, Curtiba, PR, Brazil) and a premolar with simulated periodontal ligament. Two resin composite restorative techniques were used: Inc-Z350XT, (Filtek Z350, 3M Oral Care, St.

Collagen cross-linking agents + dimethyl sulfoxide improving the adhesive properties of erosive lesion dentin.

To investigate the effect of the dimethyl sulfoxide combined with cross-linking agents on microtensile bond strength, silver nitrate penetration and in situ degree of conversion analysis of adhesives to the erosive dentin treatment with Cola-based soft drink. One hundred and sixty-six molars were assigned to 20 groups: (1) Treatment: Sound dentin; Erosive dentin; Erosive dentin treated with primer of dimethyl sulfoxide; Erosive dentin treated with DMSO primer containing proanthocyanidin and rivoflavin; (2) Adhesive systems: iBond Universal and Scotchbond Universal; and (3) adhesive strategy: etch-and-rinse or self-etch strategy. After restoration, specimens were sectioned into sticks to be tested.

Influence of Application of Dimethyl Sulfoxide on the Bonding Properties to Eroded Dentin.

Purpose: To evaluate the effect of dimethyl sulfoxide (DMSO) on the microtensile bond strength (µTBS), nanoleakage (NL), and degree of conversion (DC) of universal adhesives on eroded dentin.

Materials And Methods: One hundred thirty-four extracted (134) human third molars were selected for the study. After the dentin surface was exposed, 128 teeth were randomly assigned to 16 experimental groups as follows: dentin surfaces (sound dentin and eroded dentin), application of DMSO (without or with the application of DMSO), and adhesive strategies (etch-and-rinse [ER] and self-etch [SE]).

Effect of Addition of Dimethyl Sulfoxide to Simplified Adhesives on Dentin Bond Durability after Three Years of Water Storage.

Purpose: To evaluate the effect of inclusion of two dimethyl sulfoxide (DMSO) concentrations in simplified etch-and-rinse adhesives on dentin bonding durability after three years of water storage.

Materials And Methods: Forty-two caries-free third molars were divided into six experimental groups (n = 7) according to the following factors: 1) adhesive (Adper Single Bond 2 [SB], 3M Oral Care; Prime&Bond 2.1 [PB], Dentsply Sirona); 2) concentration of DMSO (control group: 0.

Is it possible for a simultaneous biomodification during acid etching on naturally caries-affected dentin bonding?

Objectives: This study investigated the ability of modified phosphoric acids containing chlorhexidine (CHX) or grape seed extract (GSE) for promoting simultaneous biomodification during acid etching on bonding properties in caries-affected dentin (CAD).

Materials And Methods: Thirty-two human molars (8 with sound dentin [SD] and 24 naturally CAD) were selected for the study. The SD and CAD were initially exposed, then randomized and etched according to the following groups: (1) SD (SD-CT) and CAD (CAD-CT) both with 37% phosphoric acid, (2) CAD with 2% CHX containing 37% phosphoric acid (CAD-CHX), and (3) CAD with 2% GSE containing 10% phosphoric acid (CAD-GSE).

Effect of surface treatments on the adhesive properties of metallic brackets on fluorotic enamel.

Objective: To compare the effectiveness of the pretreatment with sandblasting and deproteinization with NaOCl on bond strength (SBS), in situ conversion degree (CD) of brackets in fluorotic enamel, and enamel etching pattern.

Methods: A total of 90 non-carious maxillary premolars were used. The teeth were then assigned to six experimental groups according to: enamel surface (sound and fluorotic enamel); surface treatment (Regular etch with 37% phosphoric acid [RE]; 5.

Effect of the Photo-initiator System Contained in Universal Adhesives on Radicular Dentin Bonding.

Clinical Relevance: The photo-initiator system based on an advanced polymerization system may be an alternative that can be used to overcome the disadvantages of radicular dentin, especially for the apical third.

Summary: Objectives: The purpose of this study was to evaluate the effects of universal adhesives with different photo-initiator systems applied in etch-and-rinse (ER) and self-etch (SE) modes on dentin interaction (push-out bond strength [PBS], nanoleakage [NL], and degree of conversion [DC] within the hybrid layer) in the different root thirds after fiber post cementation.Methods and Materials: Roots of endodontically prepared human premolars were randomly divided into six groups according to one of three adhesive systems (Scotchbond Universal [SBU], Ambar Universal [AMB], and Ambar Universal APS [AMB-APS]) and two adhesive strategies (ER and SE) for each system.