Effect of mechanical stirring on sonoluminescence and sonochemiluminescence.

Light emissions from cavitating liquids serve as a diagnostic tool for chemical activity, bubble collapse conditions, or excited species. Here we demonstrate the influence of mechanical stirring on sonoluminescence (SL) and sonochemiluminescence (SCL) emissions emerging in the presence of dissolved sodium salts and luminol in different sonicated liquids. In the systems investigated, driven in the 20-40 kHz range, stirring can change the spatial distribution of blue/white broadband SL emissions and of the orange sodium D-line emission, as well as their relative intensities.

Enhancing electrostatic charge stability of corona charged Teflon electret films for radiation dosimetry by optimizing metal electrode backing material.

Metal electrode backing (MEB) material was found to have a significant role on the electrostatic surface charge stability of Teflon polytetrafluoroethylene (PTFE) electret films. PTFE films of different thicknesses were positively and negatively charged by using our home-made modified point-to-plane corona poling rotating systems. Different MEB materials and thicknesses; aluminum, copper, stainless steel, zinc, silver, and gold were applied.

Theoretical prediction of two-dimensional BCX (X = N, P, As) monolayers: ab initio investigations.

In this work, novel two-dimensional BC[Formula: see text]X (X = N, P, As) monolayers with X atoms out of the B-C plane, are predicted by means of the density functional theory. The structural, electronic, optical, photocatalytic and thermoelectric properties of the BC[Formula: see text]X monolayers have been investigated. Stability evaluation of the BC[Formula: see text]X single-layers is carried out by phonon dispersion, ab-initio molecular dynamics (AIMD) simulation, elastic stability, and cohesive energies study.

Classification of radioxenon spectra with deep learning algorithm.

In this study, we propose for the first time a model of classification for Beta-Gamma coincidence radioxenon spectra using a deep learning approach through the convolution neural network (CNN) technique. We utilize the entire spectrum of actual data from a noble gas system in Charlottesville (USX75 station) between 2012 and 2019. This study shows that the deep learning categorization can be done as an important pre-screening method without directly involving critical limits and abnormal thresholds.

Optimized Production and Biological Evaluation of Ga-PDTMP as a New Agent for PET Bone Scanning.

Introduction: In this study, Ga-PDTMP was introduced as a novel agent for PET bone scanning.

Methods: Ga-PDTMP was prepared with radiochemical purity of higher than 98% at the optimized conditions.

Results: Stability tests showed no decrease in radiochemical purity, even after 120 min.

Absorbed doses in humans from Re-Rituximab in the free form and bound to superparamagnetic iron oxide nanoparticles: Biodistribution study in mice.

Absorbed doses to human organs from Re-Rituximab in the free form and bound to superparamagnetic iron oxide nanoparticles were predicted from results of the radiopharmaceutical biodistribution studies in mice by the RADAR method. Overall, equivalent and effective doses to human organs from the radiopharmaceutical on the nanoparticles were higher because of the enhanced permeability and retention effect. Liver, spleen and kidneys received higher equivalent doses than other organs (5.

Study on a new design of Tehran Research Reactor for radionuclide production based on fast neutrons using MCNPX code.

The aim of this work is to increase the magnitude of the fast neutron flux inside the flux trap where radionuclides are produced. For this purpose, three new designs of the flux trap are proposed and the obtained fast and thermal neutron fluxes compared with each other. The first and second proposed designs were a sealed cube contained air and DO, respectively.

Preparation and evaluation of APTES-PEG coated iron oxide nanoparticles conjugated to rhenium-188 labeled rituximab.

Radioimmuno-conjugated (Rhenium-188 labeled Rituximab), 3-aminopropyltriethoxysilane (APTES)-polyethylene glycol (PEG) coated iron oxide nanoparticles were synthesized and then characterized. Therapeutic effect and targeting efficacy of complex were evaluated in CD20 express B cell lines and tumor bearing Balb/c mice respectively. To reach these purposes, superparamagnetic iron oxide nanoparticles (SPIONs) were synthesized using coprecipitation method and then their surface was treated with APTES for increasing retention time of SPIONs in blood circulation and amine group creation.

Triple Therapy of HER2 Cancer Using Radiolabeled Multifunctional Iron Oxide Nanoparticles and Alternating Magnetic Field.

By using radio-labeled multifunctional superparamagnetic iron oxide nanoparticles (SPIONs) and an alternating magnetic field (AMF), we carried out targeted hyperthermia, drug delivery, radio-immunotherapy (RIT), and controlled chemotherapy of cancer tumors. We synthesized and characterized Indium-111-labeled, Trastuzumab and Doxorubicin (DOX)-conjugated APTES-PEG-coated SPIONs in our previous work. Then, we evaluated their capability in SPECT/MRI (single photon emission computed tomography/magnetic resonance imaging) dual modal molecular imaging, targeting, and controlled release.

Development of an electrochemical W/Re generator as a technique for separation and purification of Re in radiopharmaceutical applications.

In this study, a simple electrochemical procedure adaptable for using low specific activity W for separation and purification of Re from W to obtain no carrier added (NCA) Re is developed. The electrochemical parameters were optimized to maximize the Re electrodeposition yield with minimal W contamination. Two cycle electrolysis procedure was developed.

Monte Carlo study of neutron-ambient dose equivalent to patient in treatment room.

This paper presents an analytical method for the calculation of the neutron ambient dose equivalent H* (10) regarding patients, whereby the different concrete types that are used in the surrounding walls of the treatment room are considered. This work has been performed according to a detailed simulation of the Varian 2300C/D linear accelerator head that is operated at 18MV, and silver activation counter as a neutron detector, for which the Monte Carlo MCNPX 2.6 code is used, with and without the treatment room walls.

Estimation of human absorbed dose for (166)Ho-PAM: comparison with (166)Ho-DOTMP and (166)Ho-TTHMP.

Objective: In this study, the human absorbed dose of holmium-166 ((166)Ho)-pamidronate (PAM) as a potential agent for the management of multiple myeloma was estimated.

Methods: (166)Ho-PAM complex was prepared at optimized conditions and injected into the rats. The equivalent and effective absorbed doses to human organs after injection of the complex were estimated by radiation-absorbed dose assessment resource and methods proposed by Sparks et al based on rat data.

Human absorbed dose estimation for a new (175)Yb-phosphonate based on rats data: Comparison with similar bone pain palliation agents.

In this work, the absorbed dose to human organs for (175)Yb-BPAMD was evaluated based on the biodistribution studies in rats. The results showed that the bone surface would receive the highest absorbed dose after injection of (175)Yb-BPAMD with 13.32mGy/MBq, while the other organs receive insignificant absorbed dose.

Estimation of photoneutron yield in linear accelerator with different collimation systems by Geant4 and MCNPX simulation codes.

At present, the bremsstrahlung photon beams produced by linear accelerators are the most commonly employed method of radiotherapy for tumor treatments. A photoneutron source based on three different energies (6, 10 and 15 MeV) of a linac electron beam was designed by means of Geant4 and Monte Carlo N-Particle eXtended (MCNPX) simulation codes. To obtain maximum neutron yield, two arrangements for the photo neutron convertor were studied: (a) without a collimator, and (b) placement of the convertor after the collimator.

Improvement of Accuracy in Environmental Dosimetry by TLD Cards Using Three-dimensional Calibration Method.

Introduction: The angular dependency of response for TLD cards may cause deviation from its true value on the results of environmental dosimetry, since TLDs may be exposed to radiation at different angles of incidence from the surrounding area.

Objective: A 3D setting of TLD cards has been calibrated isotropically in a standard radiation field to evaluate the improvement of the accuracy of measurement for environmental dosimetry.

Method: Three personal TLD cards were rectangularly placed in a cylindrical holder, and calibrated using 1D and 3D calibration methods.

Study of Bone Surface Absorbed Dose in Treatment of Bone Metastases via Selected Radiopharmaceuticals: Using MCNP4C Code and Available Experimental Data.

Bone metastases are major clinical concern that can cause severe problems for patients. Currently, various beta emitters are used for bone pain palliation. This study, describes the process for absorbed dose prediction of selected bone surface and volume-seeking beta emitter radiopharmaceuticals such as (32)P, (89)SrCl2,(90)Y-EDTMP,(153)Sm-EDTMP, (166)Ho-DOTMP, (177)Lu-EDTMP,(186)Re-HEDP, and (188)Re-HEDP in human bone, using MCNP code.

The effect of Mg, Cu and P impurities on dose response of LiF:Mg,Cu,P phosphors: simulation versus experiments.

In this research, the effect of magnesium (Mg), copper (Cu) and phosphorus (P) impurities on dosimetry response of LiF:Mg,Cu,P phosphors is studied experimentally and by the simulation procedure. In the experimental procedure, LiF:Mg,Cu,P phosphors in the powder form were synthesised by chemical co-precipitation method. After annealing at 250°C for 10 min, known amounts of powder were exposed to gamma doses from 0.

Improvement of overlapping nuclear track densitometry.

Detection of tracks produced by α particles, protons or nuclear fission fragments in plastic detectors, viz., solid-state nuclear track detectors, constitutes a very important tool in various areas. It is not easy for humans to count CR-39 nuclear tracks manually, especially when the track density is very high.

In vivo SPECT imaging of tumors by 198,199Au-labeled graphene oxide nanostructures.

Graphene oxide (GO) sheets functionalized by aminopropylsilyl groups (8.0 wt.%) were labeled by (198,199)Au nanoparticle radioisotopes (obtained through reduction of HAuCl4 in sodium citrate solution followed by thermal neutron irradiation) for fast in vivo targeting and SPECT imaging (high purity germanium-spectrometry) of tumors.

Synthesis, characterization and theranostic evaluation of Indium-111 labeled multifunctional superparamagnetic iron oxide nanoparticles.

Indium-111 labeled, Trastuzumab-Doxorubicin Conjugated, and APTES-PEG coated magnetic nanoparticles were designed for tumor targeting, drug delivery, controlled drug release, and dual-modal tumor imaging. Superparamagnetic iron oxide nanoparticles (SPIONs) were synthesized by thermal decomposition method to obtain narrow size particles. To increase SPIONs circulation time in blood and decrease its cytotoxicity in healthy tissues, SPIONs surface was modified with 3-Aminopropyltriethoxy Silane (APTES) and then were functionalized with N-Hydroxysuccinimide (NHS) ester of Polyethylene Glycol Maleimide (NHS-PEG-Mal) to conjugate with thiolated 3,6,9,15-tetraazabicyclo[9.

Assessment of human effective absorbed dose of 67 Ga-ECC based on biodistribution rat data.

Objective: In a diagnostic context, determination of absorbed dose is required before the introduction of a new radiopharmaceutical to the market to obtain marketing authorization from the relevant agencies. In this work, the absorbed dose of [67 Ga]-ethylenecysteamine cysteine [(67 Ga)ECC] to human organs was determined by using distribution data for rats.

Methods: For biodistribution data, the animals were sacrificed by CO2 asphyxiation at selected times after injection (0.

Prediction of 94mTc production for positron emission tomography studies using the Monte Carlo code MCNPX-2.6.

In this study, a Monte Carlo code was used to simulate a proton beam flux to calculate the (94m)Tc production yield from the (94)Mo(p,n)(94m)Tc reaction. An experimental yield of 3.465 GBq/μAh was measured for 48 min of irradiation at 1μA.

Production, Quality Control and Biological Evaluation of (166)Ho-PDTMP as a Possible Bone Palliation Agent.

Objective(s): In this study, (166)Ho-1,2-propylene di-amino tetra(methy1enephosphonicAcid) ((166)Ho-PDTMP) complex was prepared as a bone palliation agent.

Materials And Methods: The complex was successfully prepared using an in-house synthesized EDTMP ligand and (166)HoCl3. Ho-166 chloride was obtained by thermal neutron irradiation (1 × 1013 n.

Influence of ridge filter material on the beam efficiency and secondary neutron production in a proton therapy system.

In this work, the 3D proton dose profile is calculated in a homogenous water phantom using a Monte Carlo application developed with the Geant4 toolkit. The effect of the ridge filter material (for SOBP widths of 6, 9 and 12cm) on the homogeneity of the dose distribution, secondary neutron production and beam efficiency are investigated in a single ring wobbling irradiation system. The energy spectrum of secondary neutrons per primary proton at various locations around the phantom surface is calculated.

Effect of quantum correction on the acceleration and delayed heating of plasma blocks.

The interaction of laser pulses of picosecond duration and terawatt to petawatt power accelerated for the very fast undistorted plasma blocks for deuterium DD or deuterium tritium fast ignition is investigated. Based on the direct and instant conversion of laser energy into mechanical motion by nonlinear (ponderomotive) forces, any thermal pressure generation is delayed by the collision process. Following the studying of the classical collision frequency, it is found that the quantum modified collision at higher energies results in a correction by about 15% reduction of the delay.