Cassava Waste Starch as a Source of Bioplastics: Development of a Polymeric Film with Antimicrobial Properties.

Polysaccharides represent the most abundant biopolymers in agri-food wastes and thus are the most studied polymers to produce biodegradable films for use in packaging. Starch is among the major polysaccharides extracted from food and agricultural waste that have been used as precursor material for film production. Therefore, the present study aimed at producing an active film with antimicrobial properties using starch extracted from cassava waste and oil extracted from cloves.

Amikacin therapeutic drug monitoring: Evaluation of therapy performance and analytical techniques in a developing country setting.

Introduction: Healthcare systems face several challenges, with microbial infections being one of the main concerns. Therapeutic drug monitoring (TDM) is a strategy that has been encouraged to optimize antimicrobial regimens, particularly those with significant toxicity and narrow therapeutic indices, such as amikacin (AMK). We aimed to evaluate AMK concentrations of patients in a non-routine TDM setting and compare the performance of immunoassay and chromatography methods for routine clinical use.

Coffee Silverskin as a Potential Ingredient for Functional Foods: Recent Advances and a Case Study with Chocolate Cake.

Coffee silverskin (CS) is a by-product of the coffee roasting process that is known for its potential as a fiber source with antioxidant properties. Therefore, this study aimed to provide an overview of the latest research on CS as a potential ingredient for functional foods and to evaluate the effect of adding different amounts of CS on the functional and sensory attributes of chocolate cakes. The addition of CS increased the total dietary fiber content, antioxidant capacity and the contents of extractable and non-extractable phenolics in the cakes.

Development of Polymeric Films Based on Sunflower Seed Proteins and Locust Bean Gum.

Most polymeric food packaging materials are non-biodegradable and derived from petroleum, thus recent studies have focused on evaluating alternative biodegradable materials from renewable sources, with polysaccharides and proteins as the main types of employed biopolymers. Therefore, this study aimed to develop biopolymeric films based on sunflower proteins and galactomannans from locust bean gum. The influence of the galactomannan amount (0.

Development of Films from Spent Coffee Grounds' Polysaccharides Crosslinked with Calcium Ions and 1,4-Phenylenediboronic Acid: A Comparative Analysis of Film Properties and Biodegradability.

Most polymeric materials are synthetic and derived from petroleum, hence they accumulate in landfills or the ocean, and recent studies have focused on alternatives to replace them with biodegradable materials from renewable sources. Biodegradable wastes from food and agroindustry, such as spent coffee grounds (SCGs), are annually discarded on a large scale and are rich in organic compounds, such as polysaccharides, that could be used as precursors to produce films. Around 6.

Polyphenols in Jabuticaba ( spp.) Peel Flours: Extraction and Comparative Evaluation of FTIR and HPLC for Quantification of Individual Compounds.

Jabuticabas are wild fruits native to Brazil, and their peels, the main residue from jabuticaba processing, contain significant amounts of bioactive compounds, which are mostly phenolics. Conventional methods based on the estimation of total extractable phenolics (TEP-Folin-Ciocalteau) or total monomeric anthocyanins (TMA) have limitations and may not reflect the actual antioxidant potential of these peels. Analytical methods, such as high-performance liquid chromatography (HPLC), are more appropriate for the quantification of specific phenolics, and can be used as a reference for the construction of mathematical models in order to predict the amount of compounds using simple spectroscopic analysis, such as Fourier Transform Infrared Spectroscopy (FTIR).

Jabuticaba ( sp.) Peel as a Source of Pectin: Characterization and Effect of Different Extraction Methods.

The peel of jabuticaba, a small fruit native to Brazil, has been shown to be a potential source of antioxidants and soluble dietary fibers. In this study, flours prepared from these peels were evaluated as a source of pectin. Different extraction methods were employed: ultrasound (US) extraction followed by low temperature heating (40 °C); in a microwave (MW) without (method 1) or with cellulase (method 2) or hemicellulase (method 3); or in a water bath (method 4).

Potential Uses of Spent Coffee Grounds in the Food Industry.

Current estimates place the amount of spent coffee grounds annually generated worldwide in the 6 million ton figure, with the sources of spent coffee grounds being classified as domestic (i.e., household), commercial (i.

Comparison of Spectroscopy-Based Methods and Chemometrics to Confirm Classification of Specialty Coffees.

The Specialty Coffee Association (SCA) sensory analysis protocol is the methodology that is used to classify specialty coffees. However, because the sensory analysis is sensitive to the taster's training, cognitive psychology, and physiology, among other parameters, the feasibility of instrumental approaches has been recently studied for complementing such analyses. Spectroscopic methods, mainly near infrared (NIR) and mid infrared (FTIR-Fourier Transform Infrared), have been extensively employed for food quality authentication.

Stabilization mechanisms of O/W emulsions by cellulose nanocrystals and sunflower protein.

Oil-in-water (O/W) emulsions stabilized by cellulose nanocrystals (CNC) and/or sunflower proteins (SFP) were produced, aiming to study the effects of each and the mixture of these stabilizers on the interfacial behavior and physicochemical properties of O/W emulsions. The presence of CNC (non-surface activity compound) did not affect SFP solutions' adsorption kinetics since there were no differences in the interfacial tension curves of SFP and mixtures of stabilizers over time. However, either stabilizer provided alone high resistance against droplet coalescence over time (no evidence of oiling-off and no difference in the mean droplet size values), even systems with less viscoelastic interface (2 % CNC).

Chemical Characterization of Coffee Husks, a By-Product of Production.

Coffee husks are a major by-product of coffee production and are currently being underutilized. The aim of this work was to chemically characterize coffee husks to allow for an adequate evaluation of their potential for valorization. Blanched and non-blanched coffee husks were characterized for extractable and non-extractable phenolics, caffeine, trigonelline content, and for their polysaccharide and proximal composition.

Chemical Characterization and Bioaccessibility Assessment of Bioactive Compounds from Umbu ( A.) Fruit Peel and Pulp Flours.

Umbu, a common fruit from the northeastern region of Brazil, contains many bioactive compounds not yet exploited. Thus, this study evaluated the potential of pulps and peels of mature and semi-mature umbu as a source of bioactive compounds. Trigonelline contents ranged from 1.

FTIR and PLS-regression in the evaluation of bioactive amines, total phenolic compounds and antioxidant potential of dark chocolates.

Cloning techniques are used to improve agronomical traits and answer to the demand for fine chocolate. The objective of this study was to predict the concentrations of bioactive amines, phenolic compounds, and the antioxidant potential of dark monoclonal chocolate from nine fine cocoa varieties by FTIR analysis and conventional techniques. Total phenolic compounds, bioactive amines and antioxidant activity varied significantly among chocolates.

Profile of bioactive compounds in pequi (Caryocar brasilense Camb.) peel flours.

The bioactive compounds of pequi peel flours were characterized. Flavonoid contents ranged from 19.67 to 87.

Polysaccharide-rich fraction of spent coffee grounds as promising biomaterial for films fabrication.

Spent coffee grounds are wastes generated annually worldwide in significantly large amounts in the soluble coffee industry and in household and commercial beverage preparation. Although spent coffee grounds are rich in several classes of compounds, predominantly polysaccharides, profitable applications have not yet been effectively implemented for such wastes. Thus, it was the aim of this study to verify the feasibility of producing biopolymeric films from the polysaccharide-rich fraction of spent coffee grounds, obtained by alkaline hydrogen peroxide treatment of the coffee waste.

Attenuated Total Reflectance Fourier Transform Spectroscopy (ATR-FTIR) and chemometrics for discrimination of espresso coffees with different sensory characteristics.

Coffee cup quality, determined by the sensory attributes evaluated by professional tasters, is a decisive factor for evaluating coffee, with the "Specialty Coffee Association of America" (SCAA) classification being nowadays considered the most suitable. Panels of trained coffee tasters are used by the industry to describe and evaluate beverage quality, but those evaluations can be subjective and time demanding. Recent studies have demonstrated the potential of spectroscopy-based methods for establishing parameters of quality in the analysis of food products, including coffee.

Buriti (Mauritia flexuosa L. f.) fruit by-products flours: Evaluation as source of dietary fibers and natural antioxidants.

Buriti by-products flours were evaluated as sources of dietary fibers and natural antioxidants. All flours presented chemical characteristics that allowed classification as high dietary fiber powders. Presence of pectic polysaccharides, arabinoxylans and xyloglucans was inferred by the neutral monosaccharides profile.

Mid infrared spectroscopy and chemometrics as tools for the classification of roasted coffees by cup quality.

Sensory (cup) analysis is a reliable methodology for green coffee quality evaluation, but faces barriers when applied to commercial roasted coffees due to lack of information on roasting conditions. The aim of this study was to examine the potential of mid-infrared spectroscopy for predicting cup quality of arabica coffees of different roasting degrees. PCA analysis showed separation of arabica and robusta.

Physicochemical characterization, antioxidant capacity, total phenolic and proanthocyanidin content of flours prepared from pequi (Caryocar brasilense Camb.) fruit by-products.

The potential of pequi by-products as substrates for the production of flours rich in antioxidant dietary fibers was evaluated. Dietary fiber contents ranged from 39.8 to 43.

Melanoidin Removal Mechanism in An Aqueous Adsorption System: An Equilibrium, Kinetic and Thermodynamic Study.

Melanoidins are colored products that can be found in food and drinks, formed by Maillard reactions. Sometimes these compounds are considered undesirable in certain food products, because they impart a brownish color and must be removed. An overview of recent patents related to melanoidin removal indicates that it can be performed by chemical/biological degradation or by adsorption processes.

Fourier transform infrared spectroscopy and near infrared spectroscopy for the quantification of defects in roasted coffees.

The coffee strip-picking harvesting method, preferred in Brazil, results in high percentages of immature and overripe beans, as the fruits in a single tree branch do not reach ripeness at the same time. This practice, together with inappropriate processing and storage conditions, contribute to the production of high amounts of defective coffee beans in Brazil, which upon roasting will impart negative sensory aspects to the beverage. Therefore, the development of analytical methodologies that will enable the discrimination and quantification of defective and non-defective coffees after roasting is rather desirable.

Application of elastic net and infrared spectroscopy in the discrimination between defective and non-defective roasted coffees.

The quality of the coffee beverage is negatively affected by the presence of defective coffee beans and its evaluation still relies on highly subjective sensory panels. To tackle the problem of subjectivity, sophisticated analytical techniques have been developed and have been shown capable of discriminating defective from non-defective coffees after roasting. However, these techniques are not adequate for routine analysis, for they are laborious (sample preparation) and time consuming, and reliable, simpler and faster techniques need to be developed for such purpose.

Quantitative evaluation of multiple adulterants in roasted coffee by Diffuse Reflectance Infrared Fourier Transform Spectroscopy (DRIFTS) and chemometrics.

The current study presents an application of Diffuse Reflectance Infrared Fourier Transform Spectroscopy for detection and quantification of fraudulent addition of commonly employed adulterants (spent coffee grounds, coffee husks, roasted corn and roasted barley) to roasted and ground coffee. Roasted coffee samples were intentionally blended with the adulterants (pure and mixed), with total adulteration levels ranging from 1% to 66% w/w. Partial Least Squares Regression (PLS) was used to relate the processed spectra to the mass fraction of adulterants and the model obtained provided reliable predictions of adulterations at levels as low as 1% w/w.