Advancing Sustainability: Geraniol-Enhanced Waterborne Acrylic Pressure-Sensitive Adhesives without Chemical Modification.

The escalating global emphasis on sustainability, coupled with stringent regulatory frameworks, has spurred the quest for environmentally viable alternatives to petroleum-derived materials. Within this context, the adhesives industry has been actively seeking renewable options and eco-friendly synthesis pathways. This study introduces geraniol, a monoterpenoid alcohol, in its unmodified form, as a key component in the production of waterborne pressure-sensitive adhesives (PSAs) based on acrylic latex through emulsion polymerization.

Influence of Talc on the Properties of Silicone Pressure-Sensitive Adhesives.

The article describes new silicone self-adhesive adhesives modified with the addition of talc. The obtained self-adhesive materials were characterized to determine their adhesive properties (adhesion, cohesion, and adhesion) and functional properties (pot life of the composition, shrinkage, and thermal properties of adhesives). Novel materials exhibited high thermal resistance above 225 °C while maintaining or slightly reducing other values (adhesion, cohesion, shrinkage, and tack).

Biocomposites Based on Wheat Flour with Urea-Based Eutectic Plasticizer and Spent Coffee Grounds: Preparation, Physicochemical Characterization, and Study of Their Influence on Plant Growth.

In this study, we conducted the first plasticization of wheat flour (WF) with the addition of choline chloride:urea (1:5 molar ratio) eutectic mixture as a plasticizer and spent coffee grounds (cf) as a filler. Thermoplastic wheat flour (TPWF) films were obtained via twin-screw extrusion and then thermocompression. Their physicochemical characterization included mechanical tests, dynamic mechanical thermal analysis (DMTA), and sorption tests.

Influence of diatomite and its base modifications on the self-adhesive properties of silicone pressure-sensitive adhesives.

The study examined how diatomite and its modifications affected the self-adhesive ability of silicone pressure-sensitive adhesives. To create adhesive composition for testing, fillers were added to a commercial silicone resin, which were then used to create new modified pressure-sensitive tapes. The resulting tapes were tested to determine their adhesion, tack, cohesion at room and elevated temperature, SAFT test (Shear Adhesive Failure Temperature), pot-life (viscosity) and shrinkage.

Emulsion-Based Gel Loaded with Ibuprofen and Its Derivatives.

The aim of this study was to evaluate the effect of vehicle and chemical modifications of the structure of active compounds on the skin permeation and accumulation of ibuprofen (IBU). As a result, semi-solid formulations in the form of an emulsion-based gel loaded with ibuprofen and its derivatives, such as sodium ibuprofenate (IBUNa) and L-phenylalanine ethyl ester ibuprofenate ([PheOEt][IBU]), were developed. The properties of the obtained formulations were examined, including density, refractive index, viscosity, and particle size distribution.

Study on Physicochemical Properties of Biocomposite Films with Spent Coffee Grounds as a Filler and Their Influence on Physiological State of Growing Plants.

The aim of the study was to plasticize corn starch with two selected urea (U)-rich plasticizers: choline chloride (CC):U or betaine (B):U eutectic mixtures at a molar ratio of 1:5 with a presence of spent coffee grounds as a filler. The biomaterials were prepared via a solventless one-step extrusion method and then extrudates were thermoformed using compression molding into sheets. The materials were characterized using mechanical and sorption tests, TGA, DMTA and FTIR.

Influence of Illite and Its Amine Modifications on the Self-Adhesive Properties of Silicone Pressure-Sensitive Adhesives.

Obtaining new silicone self-adhesive in the presence of modified illite has been described. The filler was modified with N,N,4-trimethylaniline. The effect of illite content and modification on functional properties (adhesion, cohesion, stickiness, and shrinkage) was determined.

Study of Applying Naturally Occurring Mineral Materials for Silicone Pressure-Sensitive Adhesives.

Silicones are commonly used as adhesives when high-quality materials are required due to harsh environmental conditions such as high temperature, humidity, etc. To ensure high resistance to environmental conditions, including high temperatures, modifications of silicone adhesives are made using fillers. The characteristics of a modified silicone-based pressure-sensitive adhesive with filler are the focus of this work.

Influence of Acid-Modified Clinoptilolite on the Self-Adhesive Properties of Silicone Pressure-Sensitive Adhesives.

The preparation of a new "eternally alive adhesive" based on silicone pressure-sensitive adhesives with clinoptilolite is presented. Neat and acid-modified (i.e.

Organophilized Montmorillonites as Fillers for Silicone Pressure-Sensitive Adhesives.

In the presented work, organophilized montmorillonites (OMMT) with selected quaternary ammonium compounds (QAC) with different chemical structure ((trioctylmethylammonium chloride-A336, dimethyloctadecyl[3-trimethoxysilyl)propyl]ammonium chloride-D, cetyltrimethylammonium bromide-CTAB, 2-methacryloxyethyltrimethylammonium chloride-MOA) were obtained and used as fillers for physically modified silicone pressure-sensitive adhesives (Si-PSA). Before OMMT addition into Si-PSA matrix, they were analyzed via TGA and XRD techniques. Type of chemical structure of QAC affected d-spacing of OMMT.

Influence of Nanoclay on the Thermo-Mechanical Properties of Silicone Pressure-Sensitive Adhesives.

This research was carried on newly obtained innovative materials-self-adhesive one-sided tapes based on silicone pressure-sensitive adhesives. In order to obtain tapes, the stable adhesive composition was subjected to physical modification by incorporating into it various amounts of selected silicon fillers. The produced pressure-sensitive adhesives were tested for viscosity and thermogravimetric analysis, as well as the manufactured tapes; i.

Influence of Silicone Additives on the Properties of Pressure-Sensitive Adhesives.

Research was carried out on the influence of various silicone compounds on the properties of pressure-sensitive adhesives. Silicone-based pressure-sensitive adhesives have good self-adhesive properties and are used in many different industries. However, their thermal resistance is relatively low.

Photoreactive UV-Crosslinkable Acrylic Pressure-Sensitive Adhesives (PSA) Containing Multifunctional Photoinitiators.

The use of ultraviolet radiation (UV) technology for the crosslinking of acrylic pressure-sensitive adhesives (PSA) is the one of various crosslinking methods, being the alternative to the conventional crosslinking process of solvent-based acrylic systems. It also requires a photoinitiator to absorb the impinging UV and induce photocrosslinking. As previously mentioned, a photoinitiator is one of the important and necessary components in UV-inducted crosslinking of acrylic pressure-sensitive adhesives.

Development and Characterization of Bioactive Polypropylene Films for Food Packaging Applications.

Bioactive polypropylene (PP) films with active agents) presence for food packaging application have been prepared and characterized. The novel modified PP films were obtained via PP/additives systems regranulation and cast extrusion. The influence of two types of plasticizers (natural agents as well as commercial synthetic product) and bioactive additives on final features, e.

Hydrophilic Films Based on Carboxymethylated Derivatives of Starch and Cellulose.

The carboxymethylated derivatives of starch (CMS) and cellulose (CMC) were used for film preparation. The infrared spectroscopy revealed that crosslinking via ester bridges with citric acid occurred between the two polysaccharide derivatives. The effect of polysaccharide derivatives ratio on physicochemical properties of prepared films was evaluated.

Carboxymethylated starch and cellulose derivatives-based film as human skin equivalent for adhesive properties testing.

The films based on carboxymethyl derivatives of starch (CMS) and cellulose (CMC) were proposed as a novel human skin equivalent. The physicochemical properties (moisture absorption, solubility in water, mechanical properties) of CMS/CMC films were evaluated. Additionally, some properties were compared to the human skin ones (surface roughness, tribology).

Novel hydrophilic carboxymethyl starch/montmorillonite nanocomposite films.

Preparation of novel carboxymethyl starch (CMS)-based biodegradable films with calcium montmorillonite has been described. The biocomposites were obtained by casting method, glycerol and citric acid were used as plasticizer and crosslinking agent, respectively. The effect of calcium montmorillonite (MMT-Ca) on hydrophilicity (moisture absorption, solubility in water as well as contact angle measurements) was evaluated.