Investigations into the Material Characteristics of Selected Plastics Manufactured Using SLA-Type Additive Methods.

In this study, the authors performed a strength analysis of seven groups of commercially available materials based on SLS incremental technology. Test samples were made with Original PRUSA SL1S printers, with 10 samples of each type from 7 resins selected for testing. The tests were carried out on an MTS Bionix machine in a static tensile test, during which the basic mechanical properties were determined.

Mechanical and Material Analysis of 3D-Printed Temporary Materials for Implant Reconstructions-A Pilot Study.

In this study, the authors analyzed modern resin materials typically used for temporary reconstructions on implants and manufactured via 3D printing. Three broadly used resins: NextDent Denture 3D, NextDent C&B MFH Bleach, and Graphy TC-80DP were selected for analysis and compared to currently used acrylic materials and ABS-like resin. In order to achieve this, mechanical tests were conducted, starting with the static tensile test PN-EN.

Structure Formation in Antifriction Composites with a Nickel Matrix and Its Effect on Properties.

The paper is devoted to studying the chemical elements distribution in the material's structure depending on the manufacturing technological parameters and their effect on properties of a new self-lubricating antifriction composite based on powder nickel alloy EP975 with CaF solid lubricant for operation at temperature 800 °C and loads up to 5.0 MPa, in air. The study is focused on the features of alloying elements distribution in the composite matrix, which depends on the manufacturing technology.

Assessment of the Impact Resistance of a Composite Material with EN AW-7075 Matrix Reinforced with α-AlO Particles Using a 7.62 × 39 mm Projectile.

The paper presents the results of studies on the effects of shooting composite materials produced by pressure infiltration with the EN AW-7075 alloy as a matrix and reinforcement in the form of preforms made of α-AlO particles. Composite materials were made with two reinforcement contents (i.e.

Improved properties of micronized genetically modified flax fibers.

The aim of this study was to investigate the effect of micronization on the compound content, crystalline structure and physicochemical properties of fiber from genetically modified (GM) flax. The GM flax was transformed with three bacterial (Ralstonia eutropha) genes coding for enzymes of polyhydroxybutyrate (PHB) synthesis and under the control of the vascular bundle promoter. The modification resulted in fibers containing the 3-hydroxybutyrate polymer bound to cellulose via hydrogen and ester bonds and antioxidant compounds (phenolic acids, vanillin, vitexin, etc.