Posterior Shoulder Stability Depends on Acromial Anatomy: A Cadaveric, Biomechanical Study.

Background: Failure rates in the management of recurrent posterior shoulder instability remain a concern. Cadaveric studies have established that posterior capsulolabral tears, glenoid retroversion, and posterior glenoid bone loss result in increased posterior humeral head translation in the setting of a posteriorly directed force. A high and flat acromion has recently been associated with posterior instability.

A failure envelope approach to characterizing strength of an amputated femur with a bone-anchored percutaneous implant.

Bone-anchored percutaneous implants, commonly referred to as osseointegrated implants, are gaining popularity as an alternative to sockets for attaching a prosthetic limb to an amputated femur. While these implants have several advantages, femoral fractures are relatively common in these patients, occurring in 6.3% of femurs within 4 years.

Walking biomechanics in women with patellofemoral osteoarthritis differ compared to men with and women without patellofemoral osteoarthritis.

Background: Differences in walking biomechanics between women and men with patellofemoral joint (PF) osteoarthritis (OA) may contribute to the development or progression of persistent symptoms in people with PF OA.

Objective: Evaluate how walking biomechanics of women with PF OA differ from: (i) men with PFJ OA; and (ii) women without PF OA. Second, explore the relationship between knee-related symptoms/function and walking biomechanics in individuals with PF OA, and whether these are modified by sex.

The influence of lumbar vertebra and cage related factors on cage-endplate contact after lumbar interbody fusion: An in-vitro experimental study.

Lumbar interbody fusion (LIF) using interbody cages is an established treatment for lumbar degenerative disc disease, but fusion results are known to be affected by risk factors such as bone mineral density (BMD), endplate geometry and cage position. At present, direct measurement of endplate-cage contact variables that affect LIF have not been fully identified. The aim of this study was to use cadaveric experiments to investigate the dependency between BMD, endplate geometry, cage parameters like type, orientation, position, and contact variables like stress and area.

Validation of the Chicken Femur as a Model for the Human Metacarpal: An In-Vitro Analysis.

The aim of this study was to evaluate the chicken femur as a laboratory model for the human metacarpal by comparing the bone microarchitecture and mechanical properties of chicken femurs to human cadaveric metacarpals. Sixteen fresh chicken femora and 20 fresh frozen cadaveric human metacarpals were imaged using a micro computed tomography scanner. The bones were then mechanically tested using four-point-bending and torsional testing.

Gait balance recovery after tripping: The influence of walking speed and ground inclination on muscle and joint function.

Reactive lower limb muscle function during walking plays a key role in balance recovery following tripping, and ultimately fall prevention. The objective of this study was to evaluate muscle and joint function in the recovery limb during balance recovery after trip-based perturbations during walking. Twenty-four healthy participants underwent gait analysis while walking at slow, moderate and fast speeds over level, uphill and downhill inclines.

Muscle and joint function in the rotator cuff deficient shoulder.

Full-thickness rotator cuff tears can lead to poor coaptation of the humeral head to the glenoid, disrupting muscle forces required for glenohumeral joint stability, ultimately leading to joint subluxation. The aim of this study was to evaluate muscle forces and glenohumeral joint translations during elevation in the presence of isolated and combined full-thickness rotator cuff tears. Eight fresh-frozen upper limbs were mounted to a computer-controlled testing apparatus that simulated joint motion by simulated muscle force application.

Computational modeling of revision total hip arthroplasty involving acetabular defects: A systematic review.

Revision total hip arthroplasty (rTHA) involving acetabular defects is a complex procedure associated with lower rates of success than primary THA. Computational modeling has played a key role in surgical planning and prediction of postoperative outcomes following primary THA, but modeling applications in rTHA for acetabular defects remain poorly understood. This study aimed to systematically review the use of computational modeling in acetabular defect classification, implant selection and placement, implant design, and postoperative joint functional performance evaluation following rTHA involving acetabular defects.

Muscle and joint mechanics during maximum force biting following total temporomandibular joint replacement surgery.

Total temporomandibular joint replacement (TMJR) surgery is the established treatment for severe temporomandibular joint disorders. While TMJR surgery is known to increase mouth-opening capacity, reduce pain and improve quality of life, little is known about post-surgical jaw function during activities of daily living such as biting and chewing. The aim of this study was to use subject-specific 3D bite force measurements to evaluate the magnitude and direction of joint loading in unilateral total TMJR patients and compare these data to those in healthy control subjects.

The contribution of the ligamentum teres to the hip fluid seal: A biomechanics study.

Background: The suction seal of the hip plays an important role in maintaining hip stability; however, the function of the ligamentum teres in maintaining this seal remains poorly understood. This study aimed to evaluate the effectiveness of the hip suction seal in ligamentum teres deficient hips for joint positions occurring during gait.

Methods: Six fresh-frozen human cadaveric hips were dissected and mounted to an Instron materials test system.

The moment arms and lines of action of subscapularis after the Latarjet procedure.

The Latarjet procedure is an established surgical treatment for recurrent glenohumeral joint instability with glenoid bone loss. Intraoperatively, the conjoint tendon and its attachement on the coracoid bone graft is routed through a split in subscapularis where the graft is fixed to and augments the anteroinferior glenoid. The objective of this in vitro study was to quantify the influence of glenohumeral joint position and conjoint tendon force on the lines of action and moment arms of subscapularis muscle sub-regions after Latarjet surgery.

Classification of Fracture Risk in Fallers Using Dual-Energy X-Ray Absorptiometry (DXA) Images and Deep Learning-Based Feature Extraction.

Dual-energy X-ray absorptiometry (DXA) scans are one of the most frequently used imaging techniques for calculating bone mineral density, yet calculating fracture risk using DXA image features is rarely performed. The objective of this study was to combine deep neural networks, together with DXA images and patient clinical information, to evaluate fracture risk in a cohort of adults with at least one known fall and age-matched healthy controls. DXA images of the entire body as, well as isolated images of the hip, forearm, and spine (1488 total), were obtained from 478 fallers and 48 non-faller controls.

Subacromial contact after acromioplasty in the rotator cuff deficient shoulder.

Subacromial impingement (SAI) is associated with shoulder pain and dysfunction and is exacerbated by rotator cuff tears; however, the role of acromioplasty in mitigating subacromial contact in the rotator cuff deficient shoulder remains debated. This study aimed to quantify the influence of isolated and combined tears involving the supraspinatus on subacromial contact during abduction; and second, to evaluate the influence of acromioplasty on joint space size and subacromial contact under these pathological conditions. Eight fresh-frozen human cadaveric upper limbs were mounted to a computer-controlled testing apparatus that simulated joint motion by simulated force application.

Biomechanical Performance of Total Wrist Arthrodesis Plates With and Without Arthrodesis of the Carpometacarpal Joint.

Background: It is unknown whether total wrist arthrodesis (TWA) should be performed with or without arthrodesis of the carpometacarpal joint (CMCJ). The aim of this study is to compare CMCJ-spanning TWA plates using 3D printed wrist arthrodesis model with and without arthrodesis of the CMCJ.

Methods: Total wrist arthrodesis plates mounted to 3D printed models were tested under a 4-N bending load at 4 Hz for 50 000 cycles, increased by 15% every 10 000 cycles until failure.

The Influence of Glenoid Bone Loss and Graft Positioning on Graft and Cartilage Contact Pressures After the Latarjet Procedure.

Background: Glenohumeral joint contact loading before and after glenoid bone grafting for recurrent anterior instability remains poorly understood.

Purpose: To develop a computational model to evaluate the influence of glenoid bone loss and graft positioning on graft and cartilage contact pressures after the Latarjet procedure.

Study Design: Controlled laboratory study.

Kinematics of the jaw following total temporomandibular joint replacement surgery.

Total temporomandibular joint (TMJ) replacement surgery aims to improve mandibular function, reduce pain and enhance quality of life in patients suffering from end-stage TMJ disorders. Traditional post-operative jaw evaluation is carried out using measurement of maximum interincisal opening distance; however, this can correlate poorly to joint function. The present study aimed to evaluate three-dimensional (3D) jaw motion during border movements and chewing in unilateral total TMJ replacement patients and healthy controls.

Scaphoid, lunate and capitate kinematics in the normal and ligament deficient wrist: A bi-plane X-ray fluoroscopy study.

The ligamentous structures of the wrist stabilise and constrain the interactions of the carpal bones during active wrist motion; however, the three-dimensional translations and rotations of the scaphoid, lunate and capitate in the normal and ligament deficient wrist during planar and oblique wrist motions remain poorly understood. This study employed a computer-controlled simulator to replicate physiological wrist motion by dynamic muscle force application, while carpal kinematics were simultaneously measured using bi-plane x-ray fluoroscopy. The aim was to quantify carpal kinematics in the native wrist and after sequential sectioning of the scapholunate interosseous ligament (SLIL) and secondary scapholunate ligament structures.

The role of the ankle plantar flexor muscles in trip recovery during walking: a computational modeling study.

Background: Reactive lower limb muscle function during walking plays a role in balance, stability, and ultimately fall prevention. The objective of this study was to evaluate muscle and joint function used to regain balance after trip-based perturbations during walking.

Research Question: How are lower limb muscles used to recover from external tripping during walking?

Method: The dominant legs of 20 healthy adult participants with similar athletic backgrounds were tripped using a split-belt instrumented treadmill.

Conversion of Upper-Limb Inertial Measurement Unit Data to Joint Angles: A Systematic Review.

Inertial measurement units (IMUs) have become the mainstay in human motion evaluation outside of the laboratory; however, quantification of 3-dimensional upper limb motion using IMUs remains challenging. The objective of this systematic review is twofold. Firstly, to evaluate computational methods used to convert IMU data to joint angles in the upper limb, including for the scapulothoracic, humerothoracic, glenohumeral, and elbow joints; and secondly, to quantify the accuracy of these approaches when compared to optoelectronic motion analysis.

Biomechanical Comparison of Distal Biceps Tendon Repair Techniques: Extracortical Single-Button Inlay Fixation Versus Intracortical Double-Button Onlay Anatomic Footprint Fixation.

Background: Extracortical single-button (SB) inlay repair is a commonly used distal biceps tendon technique. However, complications (eg, neurovascular injury) and nonanatomic repairs have led to the development of intracortical fixation techniques.

Purpose: To compare the biomechanical stability of extracortical SB repair with an anatomic intracortical double-button (DB) repair technique.

Additively manufactured controlled porous orthopedic joint replacement designs to reduce bone stress shielding: a systematic review.

Background: Total joint replacements are an established treatment for patients suffering from reduced mobility and pain due to severe joint damage. Aseptic loosening due to stress shielding is currently one of the main reasons for revision surgery. As this phenomenon is related to a mismatch in mechanical properties between implant and bone, stiffness reduction of implants has been of major interest in new implant designs.

Biomechanical analysis of plating techniques for unstable lateral clavicle fractures with coracoclavicular ligament disruption (Neer type IIB).

Background: Neer type IIB lateral clavicle fractures are inherently unstable fractures with associated disruption of the coracoclavicular (CC) ligaments. Because of the high rate of nonunion and malunion, surgical fixation is recommended; however, no consensus has been reached regarding the optimal fixation method. A new plating technique using a superior lateral locking plate with anteroposterior (AP) locking screws, resulting in orthogonal fixation in the lateral fragment, has been designed to enhance stability and reduce implant failure.

Patients with recurrent anterior shoulder instability exhibit altered glenohumeral and scapulothoracic joint kinematics during upper limb movement: A prospective comparative study.

Background: Altered shoulder kinematics in patients with recurrent anterior shoulder instability remains poorly understood. This prospective study aimed to quantify in vivo glenohumeral and scapulothoracic joint kinematics and joint-contact positions in patients with shoulder instability and healthy controls.

Methods: Twenty patients with recurrent anterior shoulder instability (mean 28 years) and five patients without shoulder pathology (mean 39 years) were scanned using open CT in six static upper limb positions including 90° of abduction, combined abduction and external rotation, 90° of flexion, lift-off position (i.

Validation of a Novel Patient Specific CT-Morphometric Technique for Quantifying Bone Graft Resorption Following the Latarjet Procedure.

Bone graft resorption following the Latarjet procedure has received considerable concern. Current methods quantifying bone graft resorption rely on two-dimensional (2D) CT-scans or three-dimensional (3D) techniques, which do not represent the whole graft volume/resorption (i.e.