Bioprocess potential of Eco-friendly fungal isolates converting organic waste to bioresource.

This study aims to present indigenous fungal diversity in the soil sample collected from solid waste disposal site. The synthesis of cellulase enzymes via in laboratory scale study has been performed using indigenous fungus isolates. Additionally; its impact has been evaluated on the basis of the bioconversion of organic waste treated employing screened potential cellulase producer fungi which is further used for primary and secondary screening of cellulolytic.

Minimizing hazardous impact of food waste in a circular economy - Advances in resource recovery through green strategies.

Recent trends in food waste and its management have increasingly started to focus on treating it as a reusable resource. The hazardous impact of food waste such as the release of greenhouse gases, deterioration of water quality and contamination of land areas are a major threat posed by food waste. Under the circular economy principles, food waste can be used as a sustainable supply of high-value energy, fuel, and nutrients through green techniques such as anaerobic digestion, co-digestion, composting, enzymatic treatment, ultrasonic, hydrothermal carbonization.

Bioprocessing of waste biomass for sustainable product development and minimizing environmental impact.

Growing concerns around the generation of biomass waste have triggered conversation around sustainable utilization of these seemingly waste materials as feedstock towards energy generation and production of chemicals and other value-added products. Thus, biotechniques such as utilization of microbes and enzymes derived thereof have become important avenues for green pretreatment and conversion of biomass wastes. Although the products of these bioconversions are greener at an overall level, their consumption and utilization still impact the environment.

Single-use plastics: Production, usage, disposal, and adverse impacts.

Single-use plastics (SUPs), invented for the modern "throwaway society," are intended to be used only once. They are being increasingly produced and used globally, most notably as packaging or consumables, such as SUP shopping bags or disposable tableware. We discuss how most SUPs are landfilled or incinerated, which causes pollution, consumes valuable land, and squanders limited natural resources.

Biotechnological Potential for Microplastic Waste.

Plastic has become a critical material in the modern world due to its low cost and easy production. However, inadequate management and open disposal make plastic a major obstacle to achieving the UN Sustainable Development Goals. This article emphasizes the role of biotechnology in addressing the issue of microplastic waste.

Sustainable Bioprospecting of Electronic Waste.

Global electronic waste management is emerging as a critical issue, especially in developing countries. Collective societal effort and scientific innovation are required along with interdisciplinary approaches to the development of sustainable technologies for recycling precious metals. Bioprospecting of electronic waste is a promising approach to provide economic, environmental, and public health benefits.

Mechano-microbial systems: An ecofriendly approach for copper bioleaching from waste printed circuit board.

Waste printed circuit board (PCB) is attracting serious concerns because the recycling of its valuable metallic portion is made difficult by the existence of hazardous substances. The objective of the present study was to develop a simplified approach for copper bioleaching from waste PCB. In this context, we intended mechano-microbial systems symbolized as SET-I (spore suspension + potato dextrose broth medium + waste PCB powder), SET-II (pre-cultured until the logarithmic phase, without waste PCB powder), and SET-III (fungal metabolites produced at stationary phase).

Environmental pollution and human body burden from improper recycling of e-waste in China: A short-review.

Brief Background: E-waste generation has become a serious environmental challenge worldwide. The global quantity of e-waste was estimated 44.7 million metric tons (Mt) in 2016.

Assessing resident awareness on e-waste management in Bangalore, India: a preliminary case study.

The generation of e-waste has increased significantly in India, and the informal recycling of e-waste has adverse effects on environment and public health. In this article, the E-waste management is evaluated in accordance from the resident's awareness perspective in Bangalore city, India. The survey data revealed that about 58% male and 42% female responded and 35% of the participants belong to age range between 18 and 25 years.

The dynamic of cellulase activity of fungi inhabiting organic municipal solid waste.

The study dealt with to identified and screened out potential cellulase producing fungal strains. All the indigenous fungal strains were developed on carboxymethyl cellulose (CMC) mandel media at 30 °C for 3-4 days to examine their congo red cellulase activity. It was found from the primary screening test result that only four isolates Trichoderma viride, Aspergillus niger, Aspergillus fumigatus and Fusarium oxysporum were shown large zone formation that meant they have great potential cellulase activity.

Modelling the correlations of e-waste quantity with economic increase.

Waste from Electrical and Electronic Equipment (WEEE or e-waste) is regarded as one of the fastest growing waste streams in the world and is becoming an emerging issue owing to adverse consequences on the natural environment and the human health. This research article reveals the presence of a strong linear correlation among global e-waste generation and Gross Domestic Product. The obtained results indicate that the best fit for data can be reached by comparing e-waste collected volumes and GDP PPS.

Municipal solid waste leachate impact on metabolic activity of wheat (Triticum aestivum L.) seedlings.

Municipal solid waste (MSW) contains contaminants that could possibly leach out and pollute the soil, water sources. In this investigation, the MSW leachate toxicity was evaluated using wheat seedling plant bioassay. The eco-toxicity activities of leachate at several time intervals were explored, and the toxicity of these leachates on wheat (Triticum aestivum L.

A preliminary report of indigenous fungal isolates from contaminated municipal solid waste site in India.

Municipal solid waste (MSW) containing harmful substances is a major concern in waste management and can cause adverse effects on diversity of fungi in soil. The main objective was to evaluate the fungal diversity inhabiting in the soil nearby MSW disposal site. The fungal strains were isolated in potato dextrose agar (PDA), media at temperatures 28 ± 1 °C by using standard serial dilution pour plate method, and appeared fungal colonies identified based on morphological characteristics.

Evaluating waste printed circuit boards recycling: Opportunities and challenges, a mini review.

Rapid generation of waste printed circuit boards has become a very serious issue worldwide. Numerous techniques have been developed in the last decade to resolve the pollution from waste printed circuit boards, and also recover valuable metals from the waste printed circuit boards stream on a large-scale. However, these techniques have their own certain specific drawbacks that need to be rectified properly.

Integrated bioleaching of copper metal from waste printed circuit board-a comprehensive review of approaches and challenges.

Waste electrical and electronic equipment (e-waste) is the most rapidly growing waste stream in the world, and the majority of the residues are openly disposed of in developing countries. Waste printed circuit boards (WPCBs) make up the major portion of e-waste, and their informal recycling can cause environmental pollution and health risks. Furthermore, the conventional disposal and recycling techniques-mechanical treatments used to recover valuable metals, including copper-are not sustainable in the long term.

Waste electrical and electronic equipment management and Basel Convention compliance in Brazil, Russia, India, China and South Africa (BRICS) nations.

Brazil, Russia, India, China and South Africa (BRICS) nations account for one-quarter of the world's land area, having more than 40% of the world's population, and only one-quarter of the world gross national income. Hence the study and review of waste electrical and electronic equipment management systems in BRICS nations is of relevance. It has been observed from the literature that there are studies available comparing two or three country's waste electrical and electronic equipment status, while the study encompassing the BRICS nations considering in a single framework is scant.

Relationship between e-waste recycling and human health risk in India: a critical review.

Informal recycling of waste (including e-waste) is an emerging source of environmental pollution in India. Polychlorinated biphenyls (PCBs), polychlorinated diphenyl ethers (PBDEs), and heavy metals, among other substances, are a major health concern for workers engaged in waste disposal and processing, and for residents living near these facilities, and are also a detriment to the natural environment. The main objective of this review article was to evaluate the status of these impacts.