Controlled crumpling of graphene oxide films for tunable optical transmittance.

The delamination buckling approach provides a facile means to dynamically control the optical transmittance of extremely flexible and stretchable graphene oxide coatings with fast response time. Such graphene oxide coatings can be deposited by scalable solution-processing methods for potential applications in dynamic glazing.

Epoxy nanocomposites with two-dimensional transition metal dichalcogenide additives.

Emerging two-dimensional (2D) materials such as transition metal dichalcogenides offer unique and hitherto unavailable opportunities to tailor the mechanical, thermal, electronic, and optical properties of polymer nanocomposites. In this study, we exfoliated bulk molybdenum disulfide (MoS2) into nanoplatelets, which were then dispersed in epoxy polymers at loading fractions of up to 1% by weight. We characterized the tensile and fracture properties of the composite and show that MoS2 nanoplatelets are highly effective at enhancing the mechanical properties of the epoxy at very low nanofiller loading fractions (below 0.

Defect-induced plating of lithium metal within porous graphene networks.

Lithium metal is known to possess a very high theoretical capacity of 3,842 mAh g(-1) in lithium batteries. However, the use of metallic lithium leads to extensive dendritic growth that poses serious safety hazards. Hence, lithium metal has long been replaced by layered lithium metal oxide and phospho-olivine cathodes that offer safer performance over extended cycling, although significantly compromising on the achievable capacities.

Graphene drape minimizes the pinning and hysteresis of water drops on nanotextured rough surfaces.

Previous studies of the interaction of water with graphene-coated surfaces have been limited to flat (smooth) surfaces. Here we created a rough surface by nanopatterning and then draped the surface with a single-layer graphene sheet. We found that the ultrasheer graphene drape prevents the penetration of water into the textured surface thereby drastically reducing the contact angle hysteresis (which is a measure of frictional energy dissipation) and preventing the liquid contact line from getting pinned to the substrate.

Photothermally reduced graphene as high-power anodes for lithium-ion batteries.

Conventional graphitic anodes in lithium-ion batteries cannot provide high-power densities due to slow diffusivity of lithium ions in the bulk electrode material. Here we report photoflash and laser-reduced free-standing graphene paper as high-rate capable anodes for lithium-ion batteries. Photothermal reduction of graphene oxide yields an expanded structure with micrometer-scale pores, cracks, and intersheet voids.

High sensitivity gas detection using a macroscopic three-dimensional graphene foam network.

Nanostructures are known to be exquisitely sensitive to the chemical environment and offer ultra-high sensitivity for gas-sensing. However, the fabrication and operation of devices that use individual nanostructures for sensing is complex, expensive and suffers from poor reliability due to contamination and large variability from sample-to-sample. By contrast, conventional solid-state and conducting-polymer sensors offer excellent reliability but suffer from reduced sensitivity at room-temperature.

Wetting transparency of graphene.

We report that graphene coatings do not significantly disrupt the intrinsic wetting behaviour of surfaces for which surface-water interactions are dominated by van der Waals forces. Our contact angle measurements indicate that a graphene monolayer is wetting-transparent to copper, gold or silicon, but not glass, for which the wettability is dominated by short-range chemical bonding. With increasing number of graphene layers, the contact angle of water on copper gradually transitions towards the bulk graphite value, which is reached for ~6 graphene layers.

Graphene nanoribbon composites.

It is well established that pristine multiwalled carbon nanotubes offer poor structural reinforcement in epoxy-based composites. There are several reasons for this which include reduced interfacial contact area since the outermost nanotube shields the internal tubes from the matrix, poor wetting and interfacial adhesion with the heavily cross-linked epoxy chains, and intertube slip within the concentric nanotube cylinders leading to a sword-in-sheath type failure. Here we demonstrate that unzipping such multiwalled carbon nanotubes into graphene nanoribbons results in a significant improvement in load transfer effectiveness.