Renewable energy from solid waste: life cycle analysis and social welfare.

In this study, municipal solid waste (MSW) composition in distinct world locations is compared and a case study is assessed. Three waste-to-energy (WtE) techniques are employed within the framework of an industrial partnership. Life cycle assessment (LCA) and a brief social contextualization including the production of renewable energy from the waste generated worldwide were held to attain a holistic view and attract the interest of multiple stakeholders.

A theoretical study on municipal solid waste plasma gasification.

Gasification is an innovative and effective process which reduces the amount of waste produced by society and affords a synthetic gas with diverse applicability. In this plasma gasification study at high temperatures, a previously developed Aspen Plus model was used for municipal solid waste (MSW). The study is focused on the behavior of the equivalence ratio (ER), steam to MSW (S/MSW) ratio and gasification temperature (T), as a function of three gasification agents (air, O and steam), assessing the final syngas composition.

Fluid dynamics model on fluidized bed gasifier using agro-industrial biomass as fuel.

The present study shows the experimental and numerical results of thermal gasification of biomass, on the energy potential of agro-industrial waste from the Portalegre region. Gasification tests were performed in a pilot-scale fluidized bed gasifier, in order to study the behavior of peach stones and miscanthus to investigate the effect of gasification temperatures at 750°C, 800°C and 850°C at a constant biomass flow rate of 45kg/h. In order to optimize the operating conditions of the biomass gasification process, a numerical model is developed namely COMMENT code.

Computational fluid dynamics in abdominal aorta bifurcation: non-Newtonian versus Newtonian blood flow in a real case study.

Hemodynamic in abdominal aorta bifurcation was investigated in a real case using computational fluid dynamics. A Newtonian and non-Newtonian (Walburn-Schneck) viscosity models were compared. The geometrical model was obtained by 3D reconstruction from CT-scan and hemodynamic parameters obtained by laser-Doppler.

Hydrodynamic analysis of different finger positions in swimming: a computational fluid dynamics approach.

The aim of this research was to numerically clarify the effect of finger spreading and thumb abduction on the hydrodynamic force generated by the hand and forearm during swimming. A computational fluid dynamics (CFD) analysis of a realistic hand and forearm model obtained using a computer tomography scanner was conducted. A mean flow speed of 2 m · s(-1) was used to analyze the possible combinations of three finger positions (grouped, partially spread, totally spread), three thumb positions (adducted, partially abducted, totally abducted), three angles of attack (a = 0°, 45°, 90°), and four sweepback angles (y = 0°, 90°, 180°, 270°) to yield a total of 108 simulated situations.

A computational fluid dynamics study of propulsion due to the orientation effects of swimmer's hand.

The aim of the article is to determine the hydrodynamic characteristics of a swimmer's scanned hand model for various possible combinations of both the angle of attack and the sweepback angle, simulating separate underwater arm stroke phases of front crawl swimming. An actual swimmer's hand with thumb adducted was scanned using an Artec L 3D scanner. ANSYS Fluent code was applied for carrying out steady-state computational fluid dynamics (CFD) analysis.

Computational fluid dynamics study of swimmer's hand velocity, orientation, and shape: contributions to hydrodynamics.

The aim of this paper is to determine the hydrodynamic characteristics of swimmer's scanned hand models for various combinations of both the angle of attack and the sweepback angle and shape and velocity of swimmer's hand, simulating separate underwater arm stroke phases of freestyle (front crawl) swimming. Four realistic 3D models of swimmer's hand corresponding to different combinations of separated/closed fingers positions were used to simulate different underwater front crawl phases. The fluid flow was simulated using FLUENT (ANSYS, PA, USA).

The Effect of Depth on Drag During the Streamlined Glide: A Three-Dimensional CFD Analysis.

The aim of this study was to analyze the effects of depth on drag during the streamlined glide in swimming using Computational Fluid Dynamics. The Computation Fluid Dynamic analysis consisted of using a three-dimensional mesh of cells that simulates the flow around the considered domain. We used the K-epsilon turbulent model implemented in the commercial code Fluent(®) and applied it to the flow around a three-dimensional model of an Olympic swimmer.

Numerical simulation of two-phase flow around flatwater competition kayak design-evolution models.

The aim of the current study was to analyze the hydrodynamics of three kayaks: 97-kg-class, single-rower, flatwater sports competition, full-scale design evolution models (Nelo K1 Vanquish LI, LII, and LIII) of M.A.R.

The computational fluid dynamics study of orientation effects of oar-blade.

The distribution of pressure coefficient formed when the fluid contacts with the kayak oar blade is not been studied extensively. The CFD technique was employed to calculate pressure coefficient distribution on the front and rear faces of oar blade resulting from the numerical resolution equations of the flow around the oar blade in the steady flow conditions (4 m/s) for three angular orientations of the oar (45°, 90°, 135°) with main flow. A three-dimensional (3D) geometric model of oar blade was modeled and the k-ε turbulent model was applied to compute the flow around the oar.

Analysis of wind velocity and release angle effects on discus throw using computational fluid dynamics.

The aim of this paper is to study the aerodynamics of discus throw. A comparison of numerical and experimental performance of discus throw with and without rotation was carried out using the analysis of lift and drag coefficients. Initial velocity corresponding to variation angle of around 35.

The Hydrodynamic Study of the Swimming Gliding: a Two-Dimensional Computational Fluid Dynamics (CFD) Analysis.

Nowadays the underwater gliding after the starts and the turns plays a major role in the overall swimming performance. Hence, minimizing hydrodynamic drag during the underwater phases should be a main aim during swimming. Indeed, there are several postures that swimmers can assume during the underwater gliding, although experimental results were not conclusive concerning the best body position to accomplish this aim.

Three-dimensional CFD analysis of the hand and forearm in swimming.

The purpose of this study was to analyze the hydrodynamic characteristics of a realistic model of an elite swimmer hand/forearm using three-dimensional computational fluid dynamics techniques. A three-dimensional domain was designed to simulate the fluid flow around a swimmer hand and forearm model in different orientations (0°, 45°, and 90° for the three axes Ox, Oy and Oz). The hand/forearm model was obtained through computerized tomography scans.

Determination of the drag coefficient during the first and second gliding positions of the breaststroke underwater stroke.

The purpose of the current study was to assess and to compare the hydrodynamics of the first and second gliding positions of the breaststroke underwater stroke used after starts and turns, considering drag force (D), drag coefficient (CD) and cross-sectional area (S). Twelve national-level swimmers were tested (6 males and 6 females, respectively 18.2±4.

Swimming propulsion forces are enhanced by a small finger spread.

The main aim of this study was to investigate the effect of finger spread on the propulsive force production in swimming using computational fluid dynamics. Computer tomography scans of an Olympic swimmer hand were conducted. This procedure involved three models of the hand with differing finger spreads: fingers closed together (no spread), fingers with a small (0.

Hydrodynamic drag during gliding in swimming.

This study used a computational fluid dynamics methodology to analyze the effect of body position on the drag coefficient during submerged gliding in swimming. The k-epsilon turbulent model implemented in the commercial code Fluent and applied to the flow around a three-dimensional model of a male adult swimmer was used. Two common gliding positions were investigated: a ventral position with the arms extended at the front, and a ventral position with the arms placed along side the trunk.

Hydrodynamic analysis of different thumb positions in swimming.

The aim of the present study was to analyze the hydrodynamic characteristics of a true model of a swimmer hand with the thumb in different positions using numerical simulation techniques. A three-dimensional domain was created to simulate the fluid flow around three models of a swimmer hand, with the thumb in different positions: thumb fully abducted, partially abducted, and adducted. These three hand models were obtained through computerized tomography scans of an Olympic swimmer hand.

Analysis of drafting effects in swimming using computational fluid dynamics.

The purpose of this study was to determine the effect of drafting distance on the drag coefficient in swimming. A k-epsilon turbulent model was implemented in the commercial code Fluent(®) and applied to the fluid flow around two swimmers in a drafting situation. Numerical simulations were conducted for various distances between swimmers (0.

The use of neural network technology to model swimming performance.

to identify the factors which are able to explain the performance in the 200 meters individual medley and 400 meters front crawl events in young swimmers, to model the performance in those events using non-linear mathematic methods through artificial neural networks (multi-layer perceptrons) and to assess the neural network models precision to predict the performance. A sample of 138 young swimmers (65 males and 73 females) of national level was submitted to a test battery comprising four different domains: kinanthropometric evaluation, dry land functional evaluation (strength and flexibility), swimming functional evaluation (hydrodynamics, hydrostatic and bioenergetics characteristics) and swimming technique evaluation. To establish a profile of the young swimmer non-linear combinations between preponderant variables for each gender and swim performance in the 200 meters medley and 400 meters font crawl events were developed.

The effect of swimmer's hand/forearm acceleration on propulsive forces generation using computational fluid dynamics.

Propulsive forces generated by swimmers hand/forearm, have been studied through experimental tests. However, there are serious doubts as to whether forces quantified in this way are accurate enough to be meaningful. In order to solve some experimental problems, some numerical techniques have been proposed using Computational Fluid Dynamics (CFD).