A sustainable and economical solution for CO capture with biobased carbon materials derived from palm kernel shells.

This study investigates the synthesize of activated carbon for carbon dioxide adsorption using palm kernel shell (PKS), a by-product of oil palm industry. The adsorbent synthesis involved a simple two-step carbonization method. Firstly, PKS was activated with potassium oxide (KOH), followed by functionalization with magnesium oxide (MgO).

A review on sustainable management of biomass: physicochemical modification and its application for the removal of recalcitrant pollutants-challenges, opportunities, and future directions.

Adsorption is one of the most efficient methods for remediating industrial recalcitrant wastewater due to its simple design and low investment cost. However, the conventional adsorbents used in adsorption have several limitations, including high cost, low removal rates, secondary waste generation, and low regeneration ability. Hence, the focus of the research has shifted to developing alternative low-cost green adsorbents from renewable resources such as biomass.

Physicochemical and biological status of Aghlagan river, Iran: effects of seasonal changes and point source pollution.

Although the macroinvertebrates have been widely used as bio-indicator for river water quality assessment in developed countries, its application is new in Iran and data on the health status of the most ecologically important rivers in Iran is scarce. The present study aimed at monitoring and assessing the ecological quality of Aghlagan river, northwest of Iran, using integrated physicochemical-biological approaches. A total of 14,423 samplings were carried out from the headwater to downstream sites at four stations (S1, 2, 3, 4) by a Surber sampler (30 cm × 30 cm) from June 2018 to April 2019.

Co-regulative effects of chitosan-fennel seed extract system on the hormonal and biochemical factors involved in the polycystic ovarian syndrome.

There is a renewed interest in the application of chitosan-based drug delivery systems over the last few years. In this study, the ionic gelation method was used to prepare chitosan-engaged tripolyphosphate ions, as the cross-linking molecule, (Chit-TPP) and concurrent loading of the biomolecules of the ethanolic extract of fennel, Foeniculum vulgare, seed (FEC@NBC). The samples were characterized by SEM, DLS, TGA, FTIR, XRD, GC-MS, and zeta potential, and their effects on the related hormonal and biochemical factors of the rats with polycystic ovarian syndrome (PCOS) were assessed.

Treatment of oil refinery effluent using bio-adsorbent developed from activated palm kernel shell and zeolite.

This study investigated the potential of palm kernel shell (PKS) as a biomass feed for adsorbent production. This work aims at synthesizing green adsorbent from activated PKS by integrating iron oxide and zeolite. The newly developed adsorbents, zeolite-Fe/AC and Fe/AC, were analyzed for surface area, chemical composition, magnetic properties, crystallinity, and stability.

Biogenic integrated ZnO/Ag nanocomposite: Surface analysis and in vivo practices for the management of type 1 diabetes complications.

In this research, a milk thistle seed extract (MTSE)-rich medium was used as a capping and reducing agent for the one-pot biosynthesis of ZnO/Ag (5 wt%) nanostructure. The sample was systematically characterized through various techniques and its strong biomolecule‒metal interface structure was supported by the results. The efficacy of the derived nanostructure (MTSE/ZnO/Ag) was evaluated in vivo on the basis of its therapeutic effects on the main complications of Type 1 diabetes (hyperglycemia, hyperlipidemia, and insulin deficiency).

Two-Step Purification of Glycerol as a Value Added by Product From the Biodiesel Production Process.

For every ton of biodiesel produced, about 100 kg of glycerol is also generated as a by-product. The traditional method of removing glycerol is mainly by gravity separation or centrifugation. This method generates crude glycerol, which may still contain impurities such as methanol, oil, soap, salt, and other organic materials at ppm levels.

Predicting the degradation potential of Acid blue 113 by different oxidants using quantum chemical analysis.

In this work, quantum chemical analysis was used to predict the degradation potential of a recalcitrant dye, Acid blue 113, by hydrogen peroxide, ozone, hydroxyl radical and sulfate radical. Geometry optimization and frequency calculations were performed at 'Hartree Fock', 'Becke, 3-parameter, Lee-Yang-Parr' and 'Modified Perdew-Wang exchange combined with PW91 correlation' levels of study using 6-31G* and 6-31G** basis sets. The Fourier Transform-Raman spectra of Acid blue 113 were recorded and a complete analysis on vibrational assignment and fundamental modes of model compound was performed.

Synthesis of iron oxides impregnated green adsorbent from sugarcane bagasse: Characterization and evaluation of adsorption efficiency.

This present research aims to synthesize and investigate the adsorption potential of sugarcane bagasse (SCB) impregnated with iron oxide (FeO) for dye removal. The surface morphology and functional groups of the newly developed adsorbent (ISCB) were studied using Scanning Electron Microscopy/Energy-dispersive X-ray spectroscopy (SEM/EDX), Fourier transforms infrared spectroscopy (FTIR), and X-ray powder diffraction (XRD) analysis. The effects of the operating parameters, including initial dye concentration, adsorbent dosage, contact time and initial pH of the dye solution on the adsorption efficiency were investigated to identify an optimal condition.

A Comparative Study on a Cationic Dye Removal through Homogeneous and Heterogeneous Fenton Oxidation Systems.

Oxidative treatment of a cationic dye solution, methylene blue, was investigated using magnetite nanoparticles and goethite in heterogeneous Fenton-like reaction, and ferrous ions in homogeneous Fenton-reaction. The aim was to compare the degradation efficiencies of the studied catalysts for decolorization of methylene blue solution as the model organic pollutant. Response surface methodology (RSM) was applied to determine the optimal operational conditions for magnetite/H2O2 and goethite/H2O2 systems.

Application of doped photocatalysts for organic pollutant degradation - A review.

Advanced oxidation process involves production of hydroxyl radical for industrial wastewater treatment. This method is based on the irradiation of UV light to photocatalysts such as TiO and ZnO for photodegradation of pollutant. UV light is used for irradiation in photocatalytic process because TiO has a high band gap energy which is around 3.

Trend and current practices of palm oil mill effluent polishing: Application of advanced oxidation processes and their future perspectives.

Palm oil processing is a multi-stage operation which generates large amount of effluent. On average, palm oil mill effluent (POME) may contain up to 51, 000 mg/L COD, 25,000 mg/L BOD, 40,000 TS and 6000 mg/L oil and grease. Due to its potential to cause environmental pollution, palm oil mills are required to treat the effluent prior to discharge.

Investigation of mass transfer intensification under power ultrasound irradiation using 3D computational simulation: A comparative analysis.

This paper aims at investigating the influence of acoustic streaming induced by low-frequency (24kHz) ultrasound irradiation on mass transfer in a two-phase system. The main objective is to discuss the possible mass transfer improvements under ultrasound irradiation. Three analyses were conducted: i) experimental analysis of mass transfer under ultrasound irradiation; ii) comparative analysis between the results of the ultrasound assisted mass transfer with that obtained from mechanically stirring; and iii) computational analysis of the systems using 3D CFD simulation.

Enhancement of Treatment Efficiency of Recalcitrant Wastewater Containing Textile Dyes Using a Newly Developed Iron Zeolite Socony Mobil-5 Heterogeneous Catalyst.

Fenton oxidation, an advanced oxidation process, is an efficient method for the treatment of recalcitrant wastewaters. Unfortunately, it utilizes H2O2 and iron-based homogeneous catalysts, which lead to the formation of high volumes of sludge and secondary pollutants. To overcome these problems, an alternate option is the usage of heterogeneous catalyst.

A comparative fluid flow characterisation in a low frequency/high power sonoreactor and mechanical stirred vessel.

This study aims at analysing the jet-like acoustic streaming generated under low-frequency and high-power ultrasound irradiation and comparing it with fluid streaming generated by traditional mechanical mixing. The main characteristics of fluid flow, which include radial, axial and tangential terms of velocity and their effects on fluid flow pattern, pressure distribution, axial mixing time and turbulence intensity were considered at different power inputs. Both 3D CFD simulation and Particle Image Velocimetry (PIV) were used in this study.

Degradation and mineralization of phenol compounds with goethite catalyst and mineralization prediction using artificial intelligence.

The efficiency of phenol degradation via Fenton reaction using mixture of heterogeneous goethite catalyst with homogeneous ferrous ion was analyzed as a function of three independent variables, initial concentration of phenol (60 to 100 mg /L), weight ratio of initial concentration of phenol to that of H2O2 (1: 6 to 1: 14) and, weight ratio of initial concentration of goethite catalyst to that of H2O2 (1: 0.3 to 1: 0.7).

Influence of ultrasound power on acoustic streaming and micro-bubbles formations in a low frequency sono-reactor: mathematical and 3D computational simulation.

This paper aims at investigating the influence of ultrasound power amplitude on liquid behaviour in a low-frequency (24 kHz) sono-reactor. Three types of analysis were employed: (i) mechanical analysis of micro-bubbles formation and their activities/characteristics using mathematical modelling. (ii) Numerical analysis of acoustic streaming, fluid flow pattern, volume fraction of micro-bubbles and turbulence using 3D CFD simulation.

Simulation for supporting scale-up of a fluidized bed reactor for advanced water oxidation.

Simulation of fluidized bed reactor (FBR) was accomplished for treating wastewater using Fenton reaction, which is an advanced oxidation process (AOP). The simulation was performed to determine characteristics of FBR performance, concentration profile of the contaminants, and various prominent hydrodynamic properties (e.g.

A comparison of central composite design and Taguchi method for optimizing Fenton process.

In the present study, a comparison of central composite design (CCD) and Taguchi method was established for Fenton oxidation. [Dye]ini, Dye:Fe(+2), H2O2:Fe(+2), and pH were identified control variables while COD and decolorization efficiency were selected responses. L 9 orthogonal array and face-centered CCD were used for the experimental design.

Applicability of fluidized bed reactor in recalcitrant compound degradation through advanced oxidation processes: a review.

Treatment of industrial waste water (e.g. textile waste water, phenol waste water, pharmaceutical etc) faces limitation in conventional treatment procedures.

Kinetic modeling of a heterogeneous Fenton oxidative treatment of petroleum refining wastewater.

The mineralisation kinetics of petroleum refinery effluent (PRE) by Fenton oxidation were evaluated. Within the ambit of the experimental data generated, first-order kinetic model (FKM), generalised lumped kinetic model (GLKM), and generalized kinetic model (GKM) were tested. The obtained apparent kinetic rate constants for the initial oxidation step (k'2), their final oxidation step (k'1), and the direct conversion to endproducts step (k3') were 10.