Nanocarrier-Based, ocular drug delivery: Challenges, prospects, and the therapeutic landscape in the United Arab Emirates.

Human eyes have the most complex and advanced physiological defense barriers. Due to these barriers, efficient delivery of ocular drugs is a major challenge in the treatment of eye diseases and disorders. Posterior eye diseases such as retinopathy are the leading causes of impaired vision and blindness globally.

Multiplicative rGO/Cu-BDC MOF for 4-nitrophenol reduction and supercapacitor applications.

Two-dimensional nanosheets, with their distinct characteristics, are widely used in various applications such as water splitting, supercapacitors, catalysis etc. In this research, we produced Cu-BDC MOF nanosheets by using CuO nanotubes for metal ions and HBDC as the organic linker. We combined these Cu-BDC MOF nanosheets with reduced graphene oxide (rGO) to form a nanocomposite.

Optimizing germination conditions of Ghaf seed using ZnO nanoparticle priming through Taguchi method analysis.

Ghaf, a resilient tree in arid environments, plays a critical role in ecological restoration, desertification mitigation, and cultural heritage preservation. However, the seeds' inherent challenges, notably their hard outer coating restricting germination, emphasize the pressing need for innovative strategies. This work aimed to investigate the optimization of Ghaf seed germination process through seed priming with ZnO nanoparticles treatment (duration (t), concentration (c), temperature (T), and agitation (a), employing the Taguchi method for efficient experimental design.

Predicting projectile residual velocities using an advanced artificial neural network model.

In this research, we delve into the fascinating dynamics of projectiles and their interactions with materials, with a keen focus on residual velocity - the speed a projectile retains after striking a target. This parameter is pivotal, especially when considering the design of protective barriers in various environments. Traditional methods of gauging residual velocity have been cumbersome, resource-intensive, and occasionally inconsistent.

Prognosis methods of stress corrosion cracking under harsh environmental conditions.

Stress corrosion cracking (SCC) under harsh environmental conditions still poses a significant challenge, despite extensive research efforts. The intricate interplay among mechanical, chemical, and electrochemical factors hinders the accurate prognosis of material degradation and remaining service life. Furthermore, the demand for real-time monitoring and early detection of SCC defects adds further complexity to the prognostication process.

/Chitosan-Based Edible Film with Enhanced Antioxidant, Antimicrobial, Thermal, and Barrier Properties for Sustainable Food Preservation.

Food bioactive packaging has received increasing attention from consumers and the food industry for its potential to reduce food waste and environmental issues. Several materials can be used to produce edible films/coats; however, bio-based, cost-effective, and sustainable coatings have gained a high reputation these days. For instance, gel (AV) is a promising bio-based material for edible coatings and films; therefore, the present study aimed to investigate the film-forming abilities of AV and Chitosan (CH) combination as a potential active food packaging material.

Utilization of Mechanically Recycled Carbon Fibers in Vinyl Ester Composites.

As we enter the twenty-first century, the aviation sector is expected to thrive as flying becomes the primary mode of transportation between states or nations. With such a demand, there is a corresponding need to manufacture aircraft components. The study focused on recycling carbon fiber composites received from the STRATA company, which were cut-off/waste material generated during the manufacture of airplane components.

Microplastic Contamination of Chicken Meat and Fish through Plastic Cutting Boards.

Microplastic contamination was found in fish and chicken bought on the market, in food stores and in chain supermarkets in the Middle East with the contamination ranging from 0.03 ± 0.04 to 1.

Impact of Hybrid Fillers on the Properties of High Density Polyethylene Based Composites.

The main objective of this work is to develop a variety of hybrid high-density polyethylene (HDPE) micro- and nanocomposites and to investigate their thermal, mechanical, and morphological characteristics as a function of number of fillers and their contents percentage. In this study, 21 formulations of the composites were prepared using fillers with different sizes including micro fillers such as talc, calcium carbonate (CaCO), as well as nano-filler (fumed silica (FS)) though the melt blending technique. The morphological, mechanical, and thermal properties of the composite samples were evaluated.

Influence of Laser Process Parameters, Liquid Medium, and External Field on the Synthesis of Colloidal Metal Nanoparticles Using Pulsed Laser Ablation in Liquid: A Review.

Pulsed laser ablation in liquid, used for nanoparticle synthesis from solid bulk metal targets (a top-down approach), has been a hot topic of research in the past few decades. It is a highly efficient and 'green' fabrication method for producing pure, stable, non-toxic (ligand-free), colloidal nanoparticles, which is often challenging using traditional chemical methods. Due to the short time scale interaction between the laser pulses and the target, it is difficult to achieve complete control on the physical characteristics of metallic nanoparticles.

Conversion of Sewage Water into H Gas Fuel Using Hexagonal Nanosheets of the Polyaniline-Assisted Deposition of PbI as a Nanocomposite Photocathode with the Theoretical Qualitative Ab-Initio Calculation of the HO Splitting.

This study is very promising for providing a renewable enrgy (H gas fuel) under the elctrochemical splitting of the wastwater (sewage water). This study has double benefits: hydrogen generation and contaminations removel. This study is carried out on sewage water, third stage treated, from Beni-Suef city, Egypt.

Accelerated Discovery of the Polymer Blends for Cartilage Repair through Data-Mining Tools and Machine-Learning Algorithm.

In designing successful cartilage substitutes, the selection of scaffold materials plays a central role, among several other important factors. In an empirical approach, the selection of the most appropriate polymer(s) for cartilage repair is an expensive and time-consuming affair, as traditionally it requires numerous trials. Moreover, it is humanly impossible to go through the huge library of literature available on the potential polymer(s) and to correlate the physical, mechanical, and biological properties that might be suitable for cartilage tissue engineering.

Effect of Au Plasmonic Material on Poly M-Toluidine for Photoelectrochemical Hydrogen Generation from Sewage Water.

This study provides H gas as a renewable energy source from sewage water splitting reaction using a PMT/Au photocathode. So, this study has a dual benefit for hydrogen generation; at the same time, it removes the contaminations of sewage water. The preparation of the PMT is carried out through the polymerization process from an acid medium.

Plastic cutting boards as a source of microplastics in meat.

Plastic cutting boards were found to be the source of polythene microplastic contamination in cut meat commercially available at butchers and a supermarket chain in the Middle East, making them also a direct source of microplastic in wastewater. The mean size of the microplastic in the raw meat was 1279.2 ± 835.

ABC-Type Triblock Copolyacrylamides via Copper-Mediated Reversible Deactivation Radical Polymerization.

The aqueous Cu(0)-mediated reversible deactivation radical polymerization (RDRP) of triblock copolymers with two block sequences at 0.0 °C is reported herein. Well-defined triblock copolymers initiated from PHEAA or PDMA, containing (A) 2-hydroxyethyl acrylamide (HEAA), (B) N-isopropylacrylamide (NIPAM) and (C) N, N-dimethylacrylamide (DMA), were synthesized.

Effect of Processing Techniques on the Microstructure and Mechanical Performance of High-Density Polyethylene.

The versatility of high-density polyethylene (HDPE) makes it one of the most used polymers for vast applications ranging from food packaging to human implants. However, there still is confusion regarding the proper selection of processing techniques to produce HDPE specimens for high-end applications. Herein, we compare the processing of HDPE by two relevant techniques: compression and injection molding.

Statistical and Machine Learning-Driven Optimization of Mechanical Properties in Designing Durable HDPE Nanobiocomposites.

The selection of nanofillers and compatibilizing agents, and their size and concentration, are always considered to be crucial in the design of durable nanobiocomposites with maximized mechanical properties (i.e., fracture strength (FS), yield strength (YS), Young's modulus (YM), etc).

Investigation on the Durability of E-Glass/Epoxy Composite Exposed to Seawater at Elevated Temperature.

In this manuscript, the durability of the E-glass/epoxy composite was determined under a seawater environment. The effect of harsh environment was investigated in terms of seawater absorption, microstructure and degradation in mechanical properties. E-glass epoxy composite specimens were conditioned in gulf seawater at 23 °C, 65 °C and 90 °C for the period of 12 months.

Impact of Prolonged Exposure of Eleven Years to Hot Seawater on the Degradation of a Thermoset Composite.

This paper presents a long-term experimental investigation of E-glass/epoxy composites' durability exposed to seawater at different temperatures. The thermoset composite samples were exposed to 23 °C, 45 °C and 65 °C seawater for a prolonged exposure time of 11 years. The mechanical performance as a function of exposure time was evaluated and a strength-based technique was used to assess the durability of the composites.

A Comprehensive Review on Optimal Welding Conditions for Friction Stir Welding of Thermoplastic Polymers and Their Composites.

Friction stir welding (FSW) and friction stir spot welding (FSSW) techniques are becoming widely popular joining techniques because of their increasing potential applications in automotive, aerospace, and other structural industries. These techniques have not only successfully joined similar and dissimilar metal and polymer parts but have also successfully developed polymer-metallic hybrid joints. This study classifies the literature available on the FSW and FSSW of thermoplastic polymers and polymer composites on the basis of joining materials (similar or dissimilar), joint configurations, tooling conditions, medium conditions, and study types.

Impact Strengthening of Laminated Kevlar/Epoxy Composites by Nanoparticle Reinforcement.

Herein, we report the fabrication and characterization of high-strength Kevlar epoxy composite sheets for structural application. This process includes optimization of the curing conditions of composite preparation, such as curing time and temperature, and the incorporation of nanofillers, such as aluminum oxide (AlO), silicon carbide (SiC), and multi-walled carbon nanotubes (MWCNT) in different weight percentages. Differential scanning calorimetry (DSC) was utilized to investigate the thermal stability and curing behavior of the epoxy, finding that a minimum of 5 min is required for complete curing under an optimized temperature of 170 °C.

Thermal Insulation and Mechanical Properties of Polylactic Acid (PLA) at Different Processing Conditions.

This work aims to provide an extensive evaluation on the use of polylactic acid (PLA) as a green, biodegradable thermal insulation material. The PLA was processed by melt extrusion followed by compression molding and then subjected to different annealing conditions. Afterwards, the thermal insulation properties and structural capacity of the PLA were characterized.

Halotolerant Marine Rhizosphere-Competent Actinobacteria Promote Growth and Seed Production Using Seawater Irrigation.

is a promising halophytic cash crop that grows in seawater of the intertidal zone of the west-north coast of the UAE. This study assess plant growth promoting (PGP) capabilities of halotolerant actinobacteria isolated from rhizosphere of to be used as biological inoculants on seawater-irrigated plants. Under laboratory conditions, a total of 39 actinobacterial strains were isolated, of which 22 were tolerant to high salinity (up to 8% w/v NaCl).

Analysis of microbeads in cosmetic products in the United Arab Emirates.

The microparticle content of 37 common facial and body scrubs commercially available in the United Arab Emirates was analyzed. The chemical composition, ash content, physical characteristics, loading, particle size and shape of the microparticles were determined. Only 11 out of 37 products were found to have microplastic content.

Fracture toughness, vibration modal analysis and viscoelastic behavior of Kevlar, glass, and carbon fiber/epoxy composites for dental-post applications.

The use of flexible dental posts concentrates the stress at the dentin and the use of stiff posts increases the stress at the interface. Efforts were directed toward introducing inhomogeneous materials for resolving the disadvantages of both flexible and stiff posts. The main objective of this study was to develop three different fiber/epoxy composite posts.