Granulation of Lithium-Ion Sieves Using Biopolymers: A Review.

The high demand for lithium (Li) relates to clean, renewable storage devices and the advent of electric vehicles (EVs). The extraction of Li ions from aqueous media calls for efficient adsorbent materials with various characteristics, such as good adsorption capacity, good selectivity, easy isolation of the Li-loaded adsorbents, and good recovery of the adsorbed Li ions. The widespread use of metal-based adsorbent materials for Li ions extraction relates to various factors: (i) the ease of preparation via inexpensive and facile templation techniques, (ii) excellent selectivity for Li ions in a matrix, (iii) high recovery of the adsorbed ions, and (iv) good cycling performance of the adsorbents.

Chitosan Biocomposites with Variable Cross-Linking and Copper-Doping for Enhanced Phosphate Removal.

The fabrication of chitosan (CH) biocomposite beads with variable copper (Cu) ion doping was achieved with a glutaraldehyde cross-linker (CL) through three distinct methods: (1) formation of CH beads was followed by imbibition of Cu(II) ions (CH--Cu) without CL; (2) cross-linking of the CH beads, followed by imbibition of Cu(II) ions (CH--CL-Cu); and (3) cross-linking of pristine CH, followed by bead formation with Cu(II) imbibing onto the beads (CH-CL--Cu). The biocomposites (CH--Cu, CH--CL-Cu, and CH-CL--Cu) were characterized via spectroscopy (FTIR, C solid NMR, XPS), SEM, TGA, equilibrium solvent swelling methods, and phosphate adsorption isotherms. The results reveal variable cross-linking and Cu(II) doping of the CH beads, in accordance with the step-wise design strategy.

A Review on the Design and Hydration Properties of Natural Polymer-Based Hydrogels.

Hydrogels are hydrophilic 3D networks that are able to ingest large amounts of water or biological fluids, and are potential candidates for biosensors, drug delivery vectors, energy harvester devices, and carriers or matrices for cells in tissue engineering. Natural polymers, e.g.

Comparison of the Moisture Adsorption Properties of Starch Particles and Flax Fiber Coatings for Energy Wheel Applications.

The adsorption-desorption behavior of flax fibers (FFs) is reported in this paper. FFs are a potential desiccant material for air-to-air energy wheels, which transfer heat and moisture in building heating, ventilation, and air conditioning (HVAC) systems. The raw FFs sample was subjected to physical modification, followed by complementary material characterization to understand the relationship between its structure and its moisture uptake performance.

Flax Biomass Conversion via Controlled Oxidation: Facile Tuning of Physicochemical Properties.

The role of chemical modification of pristine linen fiber (LF) on its physicochemical and adsorption properties is reported in this contribution. The surface and textural properties of the pristine LF and its peroxyacetic acid- (PAF) and chlorite-treated (CF) fiber forms were characterized by several complementary methods: spectroscopy (SEM, TEM, FT-IR, and XPS), thermal analysis (DSC and TGA), gas/water adsorption isotherms, and zeta potential (ξ). The results obtained reveal that the surface charge and textural properties (surface area and pore structure) of the LF material was modified upon chemical treatment, as indicated by changes in the biomass composition, morphology, ξ-values, and water/dye uptake properties of the fiber samples.

Hydration and Sorption Properties of Raw and Milled Flax Fibers.

The physicochemical and hydration properties of mechanically modified flax fibers (FFs) were investigated herein. Raw flax fibers (FF-R) were ball-milled and sieved through mesh with various aperture sizes (420, 210, and 125 μm) to achieve modified samples, denoted as FF-420, FF-210, and FF-125, respectively. The physicochemical and hydration properties of FF-R with variable particle sizes were characterized using several complementary techniques: microscopy (SEM), spectroscopy (FT-IR, XRD, and XPS), thermoanalytical methods (DSC and TGA), adsorption isotherms using gas/dye probes, and solvent swelling studies in liquid HO.

Water Vapor Adsorption-Desorption Behavior of Surfactant-Coated Starch Particles for Commercial Energy Wheels.

This study reports on the adsorption (dehumidification)-desorption (humidification) behavior of cetylpyridinium bromide (CPB) coated starch particles (SPs), denoted as SP-CPB, as a potential desiccant material for air-to-air energy exchangers. CPB is a cationic surfactant with antibacterial activity that can be used to modify the surface properties of SPs, especially at variable CPB loading levels (SP-CPB0.5, SP-CPB2.

Spectroscopic and Thermodynamic Study of Biopolymer Adsorption Phenomena in Heterogeneous Solid-Liquid Systems.

Molecular selective adsorption processes at the solid surface of biopolymers in mixed solvent systems are poorly understood due to manifold interactions. However, the ability to achieve adsorptive fractionation of liquid mixtures is posited to relate to the role of specific solid-liquid interactions at the adsorbent interface. The hydration of solid biopolymers (amylose, amylopectin, cellulose) in binary aqueous systems is partly governed by the relative solvent binding affinities with the biopolymer surface sites, in accordance with the role of textural and surface chemical properties.

Inclusion Complexes of Melphalan with Gemini-Conjugated β-Cyclodextrin: Physicochemical Properties and Chemotherapeutic Efficacy in In-Vitro Tumor Models.

β-cyclodextrin (βCD) has been widely explored as an excipient for pharmaceuticals and nutraceuticals as it forms stable host-guest inclusion complexes and enhances the solubility of poorly soluble active agents. To enhance intracellular drug delivery, βCD was chemically conjugated to an 18-carbon chain cationic gemini surfactant which undergoes self-assembly to form nanoscale complexes. The novel gemini surfactant-modified βCD carrier host (hereafter referred to as 18:1βCDg) was designed to combine the solubilization and encapsulation capacity of the βCD macrocycle and the cell-penetrating ability of the gemini surfactant conjugate.

Cyclodextrin-Based Polymer-Supported Bacterium for the Adsorption and Biodegradation of Phenolic Compounds.

Dual function polymer materials with immobilized (SpC) bacterium cells are reported herein that undergo tandem adsorption and biodegradation of phenolic compounds. The cross-linked polymer materials contain β-cyclodextrin (β-CD) with incremental hexamethylene diisocyanate (HDI) cross-linker at variable mole ratios (X = 1, 3, or 6), denoted as HDI-X systems. The adsorptive uptake properties of the insoluble HDI-X polymers (X = 3 and 6) with various phenolic compounds [pentachlorophenol (PCP), 2,4,6-trichlorophenol (TCP), and 2,4,6-trimethylphenol (TMP)] were studied using batch adsorption isotherms.

Starch Particles, Energy Harvesting, and the "Goldilocks Effect".

This study reports on the unique water vapor adsorption properties of biomass-derived starch particles (SPs). SPs offer an alternative desiccant for air-to-air energy exchangers in heating, ventilation, and air conditioning systems because of their remarkable adsorption-desorption performance. SP has a particle diameter ( ) of 15 μm with a surface area (SA) of 2.

Raman and DRIFT spectra, vibrational assignments and quantum mechanical calculations of centrosymmetric meso-2,3-Dimercaptosuccinic acid.

The Raman spectrum (3700-100cm) of meso-2,3-Dimercaptosuccinic acid (meso-DMSA; CHOS) was recorded in the solid phase using 514.5 and 785nm excitation lines. Whereas, the DRIFT spectrum (4000-400cm) of the sample powdered in KBr was obtained.

Physicochemical Properties and the Gelation Process of Supramolecular Hydrogels: A Review.

Supramolecular polysaccharide-based hydrogels have attracted considerable research interest recently due to their high structural functionality, low toxicity, and potential applications in foods, cosmetics, catalysis, drug delivery, tissue engineering and the environment. Modulation of the stability of hydrogels is of paramount importance, especially in the case of stimuli-responsive systems. This review will update the recent progress related to the rational design of supramolecular hydrogels with the objective of understanding the gelation process and improving their physical gelation properties for tailored applications.

Preparation and Characterization of a Polymer-Based "Molecular Accordion".

A urethane-based polymer material, denoted HDI-1, was obtained from the addition reaction of β-cyclodextrin (β-CD) with 1,6-hexamethylene diisocyanate (HDI) at the 1:1 mole ratio. In aqueous solution and ambient temperature conditions, HDI-1 adopts a compact (coiled) morphology where the cross-linker units become coiled and are partially self-included in the annular hydroxyl (interstitial) region of β-CD. As the temperature is raised or as p-nitrophenol (PNP) was included within the β-CD cavity and the noninclusion sites of the polymer, an extended (uncoiled) morphology was adopted.

A 1H NMR Study of Host/Guest Supramolecular Complexes of a Curcumin Analogue with β-Cyclodextrin and a β-Cyclodextrin-Conjugated Gemini Surfactant.

Host systems based on β-cyclodextrin (βCD) were employed as pharmaceutical carriers to encapsulate a poorly soluble drug, curcumin analogue (NC 2067), in order to increase its water solubility. βCD was chemically conjugated with an amphiphilic gemini surfactant with the ability to self-assemble and to form nanoscale supramolecular structures. The conjugated molecule, βCDgemini surfactant (βCDg), was shown to be a promising drug delivery agent.

Nano-Sized Cyclodextrin-Based Molecularly Imprinted Polymer Adsorbents for Perfluorinated Compounds-A Mini-Review.

Recent efforts have been directed towards the design of efficient and contaminant selective remediation technology for the removal of perfluorinated compounds (PFCs) from soils, sediments, and aquatic environments. While there is a general consensus on adsorption-based processes as the most suitable methodology for the removal of PFCs from aquatic environments, challenges exist regarding the optimal materials design of sorbents for selective uptake of PFCs. This article reviews the sorptive uptake of PFCs using cyclodextrin (CD)-based polymer adsorbents with nano- to micron-sized structural attributes.

Characterization and dynamic properties for the solid inclusion complexes of β-cyclodextrin and perfluorooctanoic acid.

The structural characterization and dynamic properties of solid-state inclusion complexes (ICs) formed between β-cyclodextrin (β-CD; host) and perfluorooctanoic acid (PFOA; guest) were investigated using (13)C NMR spectroscopy. The 1:1 and 2:1 host/guest solid-state complexes were prepared using a modified dissolution method to obtain complexes with high phase purity. These complexes were further characterized using differential scanning calorimetry (DSC), FT-IR spectroscopy, powder X-ray diffraction (PXRD), (19)F directpolarization (DP), and (13)C cross-polarization (CP) with magic-angle spinning (MAS) NMR spectroscopy.

Tunable macromolecular-based materials for the adsorption of perfluorooctanoic and octanoic acid anions.

The sorption properties of tunable urethane-based copolymer materials containing β-cyclodextrin (β-CD) were evaluated with perfluorooctanoic acid (PFOA) and octanoic acid (OA) anions in aqueous solutions, respectively. The copolymer materials are herein referred to as macromolecular imprinted materials (MIMs) since their design strategy incorporates a porogen macromolecule (β-CD) within a cross-linked hexamethylene diisocyanate (HDI) framework. We report the tunable uptake of OA and PFOA anions from aqueous solution with variable adsorption modes, in accordance with the composition of the MIMs.

Formation of host-guest complexes of β-cyclodextrin and perfluorooctanoic acid.

Structural characterization and dynamic properties of solid-state inclusion complexes of β-cyclodextrin (β-CD) with perfluorooctanoic acid (PFOA) were investigated by (19)F/(13)C solid-state and (19)F/(1)H solution NMR spectroscopy. The complexes in the solid state were prepared using dissolution and slow cool methods, where thermal analyses (DSC and TGA), PXRD, and FT-IR results provided complementary support that inclusion complexes were formed between β-CD and PFOA with variable stoichiometry and inclusion geometry. (19)F DP (direct polarization) and (13)C CP (cross-polarization) with magic-angle spinning (MAS) solids NMR, along with (19)F/(1)H solution NMR were used to characterize the complexes in the solid and solution phases, respectively.