Beyond the Active Site: Tuning the Activity and Selectivity of a Metal-Organic Framework-Supported Ni Catalyst for Ethylene Dimerization.

To modify its steric and electronic properties as a support for heterogeneous catalysts, electron-withdrawing and electron-donating ligands, hexafluoroacetylacetonate (Facac) and acetylacetonate (Acac), were introduced to the metal-organic framework (MOF), NU-1000, via a process akin to atomic layer deposition (ALD). In the absence of Facac or Acac, NU-1000-supported, AIM-installed Ni(II) sites yield a mixture of C4, C6, C8, and polymeric products in ethylene oligomerization. (AIM = ALD-like deposition in MOFs).

Improving the Efficiency of Mustard Gas Simulant Detoxification by Tuning the Singlet Oxygen Quantum Yield in Metal-Organic Frameworks and Their Corresponding Thin Films.

The photocatalytically driven partial oxidation of a mustard gas simulant, 2-chloroethyl ethyl sulfide (CEES), was studied using the perylene-based metal-organic framework (MOF) UMCM-313 and compared to the activities of the Zr-based MOFs: PCN-222/MOF-545 and NU-1000. The rates of CEES oxidation positively correlated with the singlet oxygen quantum yield of the MOF linkers, porphyrin (PCN-222/MOF-545) < pyrene (NU-1000) < perylene (UMCM-313). Subsequently, thin films of UMCM-313 and NU-1000 were solvothermally grown on a conductive glass substrate to minimize catalyst loading and prevent light scattering by suspended MOF particles.

Site-Directed Synthesis of Cobalt Oxide Clusters in a Metal-Organic Framework.

Direct control over structure and location of catalytic species deposited on amorphous supports represents a formidable challenge in heterogeneous catalysis. In contrast, a structurally well-defined, crystalline metal-organic framework (MOF) can be rationally designed using postsynthetic techniques to allow for desired structural or locational changes of deposited metal ions. Herein, naphthalene dicarboxylate linkers are incorporated in the MOF, NU-1000, to block the small cavities where few-atom clusters of cobalt oxide preferentially grow, inducing catalyst deposition toward hitherto ill-favored grafting sites orientated toward NU-1000s mesoporous channels.

Size Effect of the Active Sites in UiO-66-Supported Nickel Catalysts Synthesized via Atomic Layer Deposition for Ethylene Hydrogenation.

Ni(II) ions have been deposited on the Zr nodes of a metal-organic framework (MOF), UiO-66, via an ALD-like process (ALD = atomic layer deposition). By varying the number of ALD cycles, three Ni-decorated UiO-66 materials were synthesized. A suite of physical methods has been used to characterize these materials, indicating structural and high-surface-area features of the parent MOF are retained.

Fine-Tuning the Activity of Metal-Organic Framework-Supported Cobalt Catalysts for the Oxidative Dehydrogenation of Propane.

Few-atom cobalt-oxide clusters, when dispersed on a Zr-based metal-organic framework (MOF) NU-1000, have been shown to be active for the oxidative dehydrogenation (ODH) of propane at low temperatures (<230 °C), affording a selective and stable propene production catalyst. In our current work, a series of promoter ions with varying Lewis acidity, including Ni(II), Zn(II), Al(III), Ti(IV) and Mo(VI), are anchored as metal-oxide,hydroxide clusters to NU-1000 followed by Co(II) ion deposition, yielding a series of NU-1000-supported bimetallic-oxo,hydroxo,aqua clusters. Using difference envelope density (DED) analyses, the spatial locations of the promoter ions and catalytic cobalt ions are determined.

Addressing the characterisation challenge to understand catalysis in MOFs: the case of nanoscale Cu supported in NU-1000.

We explore the dynamic structure and reactivity of Cu species supported on NU-1000. By combining pair distribution function (PDF) analysis and difference envelope density (DED) analysis of in situ synchrotron-based X-ray scattering data, we simultaneously probe the local structure of supported Cu-species, their distribution within NU-1000 and distortions of the NU-1000 lattice under conditions relevant to catalysis and catalyst activation. These analyses show that atomic layer deposition (ALD) of Cu in NU-1000 (Cu-AIM) leads to the formation of Cu-oxo clusters within the small pores that connect the triangular and hexagonal channels.

Metal-Organic Framework Supported Cobalt Catalysts for the Oxidative Dehydrogenation of Propane at Low Temperature.

Zr-based metal-organic frameworks (MOFs) have been shown to be excellent catalyst supports in heterogeneous catalysis due to their exceptional stability. Additionally, their crystalline nature affords the opportunity for molecular level characterization of both the support and the catalytically active site, facilitating mechanistic investigations of the catalytic process. We describe herein the installation of Co(II) ions to the Zr nodes of the mesoporous MOF, NU-1000, via two distinct routes, namely, solvothermal deposition in a MOF (SIM) and atomic layer deposition in a MOF (AIM), denoted as Co-SIM+NU-1000 and Co-AIM+NU-1000, respectively.

Atomic Layer Deposition of Ultrathin Nickel Sulfide Films and Preliminary Assessment of Their Performance as Hydrogen Evolution Catalysts.

Transition metal sulfides show great promise for applications ranging from catalysis to electrocatalysis to photovoltaics due to their high stability and conductivity. Nickel sulfide, particularly known for its ability to electrochemically reduce protons to hydrogen gas nearly as efficiently as expensive noble metals, can be challenging to produce with certain surface site compositions or morphologies, e.g.

An Exceptionally Stable Metal-Organic Framework Supported Molybdenum(VI) Oxide Catalyst for Cyclohexene Epoxidation.

Molybdenum(VI) oxide was deposited on the Zr node of the mesoporous metal-organic framework NU-1000 via condensed-phase deposition where the MOF is simply submerged in the precursor solution, a process named solvothermal deposition in MOFs (SIM). Exposure to oxygen leads to a monodisperse, porous heterogeneous catalyst, named Mo-SIM, and its structure on the node was elucidated both computationally and spectroscopically. The catalytic activity of Mo-SIM was tested for the epoxidation of cyclohexene.

Toward Inexpensive Photocatalytic Hydrogen Evolution: A Nickel Sulfide Catalyst Supported on a High-Stability Metal-Organic Framework.

Few-atom clusters composed of nickel and sulfur have been successfully installed into the Zr(IV)-based metal-organic framework (MOF) NU-1000 via ALD-like chemistry (ALD = atomic layer deposition). X-ray photoelectron spectroscopy and Raman spectroscopy are used to determine that primarily Ni(2+) and S(2-) sites are deposited within the MOF. In a pH 7 buffered aqueous solution, the porous catalyst is able to produce H2 gas at a rate of 3.

Sintering-Resistant Single-Site Nickel Catalyst Supported by Metal-Organic Framework.

Developing supported single-site catalysts is an important goal in heterogeneous catalysis since the well-defined active sites afford opportunities for detailed mechanistic studies, thereby facilitating the design of improved catalysts. We present herein a method for installing Ni ions uniformly and precisely on the node of a Zr-based metal-organic framework (MOF), NU-1000, in high density and large quantity (denoted as Ni-AIM) using atomic layer deposition (ALD) in a MOF (AIM). Ni-AIM is demonstrated to be an efficient gas-phase hydrogenation catalyst upon activation.

A porous proton-relaying metal-organic framework material that accelerates electrochemical hydrogen evolution.

The availability of efficient hydrogen evolution reaction (HER) catalysts is of high importance for solar fuel technologies aimed at reducing future carbon emissions. Even though Pt electrodes are excellent HER electrocatalysts, commercialization of large-scale hydrogen production technology requires finding an equally efficient, low-cost, earth-abundant alternative. Here, high porosity, metal-organic framework (MOF) films have been used as scaffolds for the deposition of a Ni-S electrocatalyst.

Atomically Precise Growth of Catalytically Active Cobalt Sulfide on Flat Surfaces and within a Metal-Organic Framework via Atomic Layer Deposition.

Atomic layer deposition (ALD) has been employed as a new synthetic route to thin films of cobalt sulfide on silicon and fluorine-doped tin oxide platforms. The self-limiting nature of the stepwise synthesis is established through growth rate studies at different pulse times and temperatures. Additionally, characterization of the materials by X-ray diffraction and X-ray photoelectron spectroscopy indicates that the crystalline phase of these films has the composition Co9S8.

Synthesis of nanocrystals of Zr-based metal-organic frameworks with csq-net: significant enhancement in the degradation of a nerve agent simulant.

The synthesis of nano-sized particles of NU-1000 (length from 75 nm to 1200 nm) and PCN-222/MOF-545 (length from 350 nm to 900 nm) is reported. The catalytic hydrolysis of methyl paraoxon was investigated as a function of NU-1000 crystallite size and a significant enhancement in the rate was observed for the nano-sized crystals compared to microcrystals.