Additively manufactured hierarchical stainless steels with high strength and ductility.

Many traditional approaches for strengthening steels typically come at the expense of useful ductility, a dilemma known as strength-ductility trade-off. New metallurgical processing might offer the possibility of overcoming this. Here we report that austenitic 316L stainless steels additively manufactured via a laser powder-bed-fusion technique exhibit a combination of yield strength and tensile ductility that surpasses that of conventional 316L steels.

First Liquid Layer Inertial Confinement Fusion Implosions at the National Ignition Facility.

The first cryogenic deuterium and deuterium-tritium liquid layer implosions at the National Ignition Facility (NIF) demonstrate D_{2} and DT layer inertial confinement fusion (ICF) implosions that can access a low-to-moderate hot-spot convergence ratio (1230) DT ice layer implosions. Although high CR is desirable in an idealized 1D sense, it amplifies the deleterious effects of asymmetries.

Synthesis of Nanostructured/Macroscopic Low-Density Copper Foams Based on Metal-Coated Polymer Core-Shell Particles.

A robust, millimeter-sized low-density Cu foam with ∼90% (v/v) porosity, ∼30 nm thick walls, and ∼1 μm diameter spherical pores is prepared by the slip-casting of metal-coated polymer core-shell particles followed by a thermal removal of the polymer. In this paper, we report our key findings that enable the development of the low-density Cu foams. First, we need to synthesize polystyrene (PS) particles coated with a very thin Cu layer (in the range of tens of nanometers).

In Situ Real-Time Radiographic Study of Thin Film Formation Inside Rotating Hollow Spheres.

Hollow spheres with uniform coatings on the inner surface have applications in optical devices, time- or site-controlled drug release, heat storage devices, and target fabrication for inertial confinement fusion experiments. The fabrication of uniform coatings, which is often critical for the application performance, requires precise understanding and control over the coating process and its parameters. Here, we report on in situ real-time radiography experiments that provide critical spatiotemporal information about the distribution of fluids inside hollow spheres during uniaxial rotation.

Ramp compression of diamond to five terapascals.

The recent discovery of more than a thousand planets outside our Solar System, together with the significant push to achieve inertially confined fusion in the laboratory, has prompted a renewed interest in how dense matter behaves at millions to billions of atmospheres of pressure. The theoretical description of such electron-degenerate matter has matured since the early quantum statistical model of Thomas and Fermi, and now suggests that new complexities can emerge at pressures where core electrons (not only valence electrons) influence the structure and bonding of matter. Recent developments in shock-free dynamic (ramp) compression now allow laboratory access to this dense matter regime.

Ultra-strong and low-density nanotubular bulk materials with tunable feature sizes.

The synthesis of ultralow-density (>5 mg/cm(3) ) bulk materials with interconnected nanotubular morphology and deterministic, fully tunable feature size, composition, and density is presented. A thin-walled nanotubular design realized by employing templating based on atomic layer deposition makes the material about 10 times stronger and stiffer than aerogels of the same density.

Atomic layer deposition-derived ultra-low-density composite bulk materials with deterministic density and composition.

A universal approach for on-demand development of monolithic metal oxide composite bulk materials with air-like densities (<5 mg/cm(3)) is reported. The materials are fabricated by atomic layer deposition of titania (TiO2) or zinc oxide (ZnO) using the nanoscale architecture of 1 mg/cm(3) SiO2 aerogels formed by self-organization as a blueprint. This approach provides deterministic control over density and composition without affecting the nanoscale architecture of the composite material that is otherwise very difficult to achieve.

Measurement of high-pressure shock waves in cryogenic deuterium-tritium ice layered capsule implosions on NIF.

The first measurements of multiple, high-pressure shock waves in cryogenic deuterium-tritium (DT) ice layered capsule implosions on the National Ignition Facility have been performed. The strength and relative timing of these shocks must be adjusted to very high precision in order to keep the DT fuel entropy low and compressibility high. All previous measurements of shock timing in inertial confinement fusion implosions [T.

Deterministic control over high-Z doping of polydicyclopentadiene-based aerogel coatings.

We report on simple and efficient routes to dope polydicyclopentadiene (PDCPD)-based aerogels and their coatings with high-Z tracer elements. Initially, direct halogenation of PDCPD wet gels and aerogels with elemental iodine or bromine was studied. Although several pathways were identified that allowed doping of PDCPD aerogels by direct addition of bromine or iodine to the unsaturated polymer backbone, they all provided limited control over the amount and uniformity of doping, especially at very low dopant concentrations.

Defective twin boundaries in nanotwinned metals.

Coherent twin boundaries (CTBs) are widely described, both theoretically and experimentally, as perfect interfaces that play a significant role in a variety of materials. Although the ability of CTBs in strengthening, maintaining the ductility and minimizing the electron scattering is well documented, most of our understanding of the origin of these properties relies on perfect-interface assumptions. Here we report experiments and simulations demonstrating that as-grown CTBs in nanotwinned copper are inherently defective with kink-like steps and curvature, and that these imperfections consist of incoherent segments and partial dislocations.

Precision shock tuning on the national ignition facility.

Ignition implosions on the National Ignition Facility [J. D. Lindl et al.

ALD functionalized nanoporous gold: thermal stability, mechanical properties, and catalytic activity.

Nanoporous metals have many technologically promising applications, but their tendency to coarsen limits their long-term stability and excludes high temperature applications. Here, we demonstrate that atomic layer deposition (ALD) can be used to stabilize and functionalize nanoporous metals. Specifically, we studied the effect of nanometer-thick alumina and titania ALD films on thermal stability, mechanical properties, and catalytic activity of nanoporous gold (np-Au).

Demonstration of ignition radiation temperatures in indirect-drive inertial confinement fusion hohlraums.

We demonstrate the hohlraum radiation temperature and symmetry required for ignition-scale inertial confinement fusion capsule implosions. Cryogenic gas-filled hohlraums with 2.2 mm-diameter capsules are heated with unprecedented laser energies of 1.

Achieving large uniform tensile ductility in nanocrystalline metals.

Synchrotron x-ray diffraction and high-resolution electron microscopy revealed the origin of different strain hardening behaviors (and dissimilar tensile ductility) in nanocrystalline Ni and nanocrystalline Co. Planar defect accumulations and texture evolution were observed in Co but not in Ni, suggesting that interfacial defects are an effective passage to promote strain hardening in truly nanograins. Twinning becomes less significant in Co when grain sizes reduce to below ~15 nm.

Matrix-assisted energy conversion in nanostructured piezoelectric arrays.

We demonstrate an organic/inorganic hybrid energy-harvesting platform, based on nanostructured piezolelectric arrays embedded in an environmental-responsive polymer matrix, which can self-generate electrical power by scavenging energy from the environment. A proof of principle device is designed, fabricated, and tested using vertically aligned ZnO nanowires and heat as the local energy source. The device layout takes advantage of the collective stretching motion of piezoelectric ZnO NWs, induced by the shape-change of the matrix polymer, to convert the thermal energy into direct current with output power densities of ∼20 nW/cm(2) at a heating temperature of ∼65 °C.

Effect of surface chemistry on the stability of gold nanostructures.

Understanding the role of surface chemistry in the stability of nanostructured noble-metal materials is important for many technological applications but experimentally difficult to access and thus little understood. To develop a fundamental understanding of the effect of surface chemistry on both the formation and stabilization of self-organized gold nanostructures, we performed a series of controlled-environment annealing experiments on nanoporous gold (np-Au) and ion-bombarded Au(111) single-crystal surfaces. The annealing experiments on np-Au in ambient ozone were carried out to study the effect of adsorbed oxygen under dynamic conditions, whereas the ion-bombarded Au single-crystal surfaces were used as a model system to obtain atomic-scale information.

Electrocapillary maximum and potential of zero charge of carbon aerogel.

We present an electrochemical study of carbon aerogel (CA) in aqueous sodium fluoride solutions, focusing on the comparison of two quantities that are related to the potential of zero charge (pzc): the capacitance minimum and the 'electrocapillary maximum' of the surface forces. Capacitance minima are well resolved in our samples. Their potential emerges reproducibly as around 90 mV (vs.

Symmetric inertial confinement fusion implosions at ultra-high laser energies.

Indirect-drive hohlraum experiments at the National Ignition Facility have demonstrated symmetric capsule implosions at unprecedented laser drive energies of 0.7 megajoule. One hundred and ninety-two simultaneously fired laser beams heat ignition-emulate hohlraums to radiation temperatures of 3.

Hohlraum-driven mid-Z (SiO2) double-shell implosions on the omega laser facility and their scaling to NIF.

High-convergence, hohlraum-driven implosions of double-shell capsules using mid-Z (SiO2) inner shells have been performed on the OMEGA laser facility [T. R. Boehly, Opt.

Diamond at 800 GPa.

A new compression technique, which enables the study of solids into the TPa regime, is described and used to ramp (or quasi-isentropically) compress diamond to a peak pressure of 1400 GPa. Diamond stress versus density data are reported to 800 GPa and suggest that the diamond phase is stable and has significant material strength up to at least this stress level. Data presented here are the highest ramp compression pressures by more than a factor of 5 and the highest-pressure solid equation-of-state data ever reported.

Surface-chemistry-driven actuation in nanoporous gold.

Although actuation in biological systems is exclusively powered by chemical energy, this concept has not been realized in man-made actuator technologies, as these rely on generating heat or electricity first. Here, we demonstrate that surface-chemistry-driven actuation can be realized in high-surface-area materials such as nanoporous gold. For example, we achieve reversible strain amplitudes of the order of a few tenths of a per cent by alternating exposure of nanoporous Au to ozone and carbon monoxide.