Conveyor CVD to high-quality and productivity of large-area graphene and its potentiality.

The mass production of high-quality graphene is required for industrial application as a future electronic material. However, the chemical vapor deposition (CVD) systems previously studied for graphene production face bottlenecks in terms of quality, speed, and reproducibility. Herein, we report a novel conveyor CVD system that enables rapid graphene synthesis using liquid precursors.

Toward Ideal Low-Frequency Noise in Monolayer CVD MoS FETs: Influence of van der Waals Junctions and Sulfur Vacancy Management.

The pursuit of sub-1-nm field-effect transistor (FET) channels within 3D semiconducting crystals faces challenges due to diminished gate electrostatics and increased charge carrier scattering. 2D semiconductors, exemplified by transition metal dichalcogenides, provide a promising alternative. However, the non-idealities, such as excess low-frequency noise (LFN) in 2D FETs, present substantial hurdles to their realization and commercialization.

Tailored Synthesis of Heterogenous 2D TMDs and Their Spectroscopic Characterization.

Two-dimensional (2D) vertical van der Waals heterostructures (vdWHs) show great potential across various applications. However, synthesizing large-scale structures poses challenges owing to the intricate growth parameters, forming unexpected hybrid film structures. Thus, precision in synthesis and thorough structural analysis are essential aspects.

Unusual Raman Enhancement Effect of Ultrathin Copper Sulfide.

In surface-enhanced Raman spectroscopy (SERS), 2D materials are explored as substrates owing to their chemical stability and reproducibility. However, they exhibit lower enhancement factors (EFs) compared to noble metal-based SERS substrates. This study demonstrates the application of ultrathin covellite copper sulfide (CuS) as a cost-effective SERS substrate with a high EF value of 7.

Morphologically Controlled Synthesis of Reduced-Dimensional ZnO/Zn(OH) Nanosheets.

Conventional two-dimensional materials either have natural layered structures or are produced, with large surface areas, via physical or chemical synthesis. However, to form a two-dimensional material from a non-layered material, a method different from the existing ones is required. In this study, a surfactant-assisted method was utilized to synthesize Zn(OH) (a nonlayered transition metal oxide) nanosheets.

Multifunctional-high resolution imaging plate based on hydrophilic graphene for digital pathology.

In the present study, we showed that hydrophilic graphene can serve as an ideal imaging plate for biological specimens. Graphene being a single-atom-thick semi-metal with low secondary electron emission, array tomography analysis of serial sections of biological specimens on a graphene substrate showed excellent image quality with improved-axis resolution, without including any conductive surface coatings. However, the hydrophobic nature of graphene makes the placement of biological specimens difficult; graphene functionalized with polydimethylsiloxane oligomer was fabricated using a simple soft lithography technique and then processed with oxygen plasma to provide hydrophilic graphene with minimal damage to graphene.

Tuning Schottky Barrier of Single-Layer MoS Field-Effect Transistors with Graphene Electrodes.

Two-dimensional materials have the potential to be applied in flexible and transparent electronics. In this study, single-layer MoS field-effect transistors (FETs) with Au/Ti-graphene heteroelectrodes were fabricated to examine the effect of the electrodes on the electrical properties of the MoS FETs. The contact barrier potential was tuned using an electric field.

Electrochemical Transparency of Graphene.

In the present study, we used the electrochemical transparency of graphene to show that the direct intercalation of alkali-metal cations is not a prerequisite for the redox reaction of Prussian blue (PB). PB thin films passivated with monolayer graphene still underwent electrochemical redox reactions in the presence of alkali-metal ions (K or Na) despite the inability of the cations to penetrate the graphene and be incorporated into the PB. Graphene passivation not only preserved the electrochemical activity of the PB but also substantially enhanced the stability of the PB.

Epitaxial single-crystal hexagonal boron nitride multilayers on Ni (111).

Large-area single-crystal monolayers of two-dimensional (2D) materials such as graphene, hexagonal boron nitride (hBN) and transition metal dichalcogenides have been grown. hBN is considered to be the 'ideal' dielectric for 2D-materials-based field-effect transistors (FETs), offering the potential for extending Moore's law. Although hBN thicker than a monolayer is more desirable as substrate for 2D semiconductors, highly uniform and single-crystal multilayer hBN growth has yet to be demonstrated.

Observation of Strong Interlayer Couplings in WS/MoS Heterostructures via Low-Frequency Raman Spectroscopy.

Van der Waals (vdW) heterostructures based on two-dimensional (2D) transition metal dichalcogenides (TMDCs), particularly WS/MoS heterostructures with type-II band alignments, are considered as ideal candidates for future functional optoelectronic applications owing to their efficient exciton dissociation and fast charge transfers. These physical properties of vdW heterostructures are mainly influenced by the interlayer coupling occurring at the interface. However, a comprehensive understanding of the interlayer coupling in vdW heterostructures is still lacking.

A Redox-Mediator-Integrated Flexible Micro-Supercapacitor with Improved Energy Storage Capability and Suppressed Self-Discharge Rate.

To effectively improve the energy density and reduce the self-discharging rate of micro-supercapacitors, an advanced strategy is required. In this study, we developed a hydroquinone (HQ)-based polymer-gel electrolyte (HQ-gel) for micro-supercapacitors. The introduced HQ redox mediators (HQ-RMs) in the gel electrolyte composites underwent additional Faradaic redox reactions and synergistically increased the overall energy density of the micro-supercapacitors.

Electrode-Induced Self-Healed Monolayer MoS for High Performance Transistors and Phototransistors.

Contact engineering for monolayered transition metal dichalcogenides (TMDCs) is considered to be of fundamental challenge for realizing high-performance TMDCs-based (opto) electronic devices. Here, an innovative concept is established for a device configuration with metallic copper monosulfide (CuS) electrodes that induces sulfur vacancy healing in the monolayer molybdenum disulfide (MoS ) channel. Excess sulfur adatoms from the metallic CuS electrodes are donated to heal sulfur vacancy defects in MoS that surprisingly improve the overall performance of its devices.

Direct Pattern Growth of Carbon Nanomaterials by Laser Scribing on Spin-Coated Cu-PI Composite Films and Their Gas Sensor Application.

The excellent physical and chemical properties of carbon nanomaterials render them suitable for application in gas sensors. However, the synthesis of carbon nanomaterials using high-temperature furnaces is time consuming and expensive. In this study, we synthesize a carbon nanomaterial using local laser-scribing on a substrate coated with a Cu-embedded polyimide (PI) thin film to reduce the processing time and cost.

Fabrication of Carbon Nanomaterials Using Laser Scribing on Copper Nanoparticles-Embedded Polyacrylonitrile Films and Their Application in a Gas Sensor.

Carbon nanomaterials have attracted significant research attention as core materials in various industrial sectors owing to their excellent physicochemical properties. However, because the preparation of carbon materials is generally accompanied by high-temperature heat treatment, it has disadvantages in terms of cost and process. In this study, highly sensitive carbon nanomaterials were synthesized using a local laser scribing method from a copper-embedded polyacrylonitrile (CuPAN) composite film with a short processing time and low cost.

Room Temperature Wafer-Scale Synthesis of Highly Transparent, Conductive CuS Nanosheet Films via a Simple Sulfur Adsorption-Corrosion Method.

The development of highly conductive electrodes with robust mechanical durability and clear transmittance in the visible to IR spectral range is of great importance for future wearable/flexible electronic applications. In particular, low resistivity, robust flexibility, and wide spectral transparency have a significant impact on optoelectronic performance. Herein, we introduce a new class of covellite copper monosulfide (CuS) nanosheet films as a promising candidate for soft transparent conductive electrodes (TCEs).

Phase Transition-Induced Temperature-Dependent Phonon Shifts in Molybdenum Disulfide Monolayers Interfaced with a Vanadium Dioxide Film.

We report the optical phonon shifts induced by phase transition effects of vanadium dioxide (VO) in monolayer molybdenum disulfide (MoS) when interfacing with a VO film showing a metal-insulator transition coupled with structural phase transition (SPT). To this end, the monolayer MoS directly synthesized on a SiO/Si substrate by chemical vapor deposition was first transferred onto a VO/c-AlO substrate in which the VO film was prepared by a sputtering method. We compared the MoS interfaced with the VO film with the as-synthesized MoS by using Raman spectroscopy.

Electrochemically active hydroquinone-based redox mediator for flexible energy storage system with improved charge storing ability.

Electrochemically active redox mediators have been widely investigated in energy conversion/storage system to improve overall catalytic activities and energy storing ability by inducing favorable surface redox reactions. However, the enhancement of electrochemical activity from the utilization of redox mediators (RMs) is only confirmed through theoretical computation and laboratory-scale experiment. The use of RMs for practical, wearable, and flexible applications has been scarcely researched.

Phase-dependent gas sensitivity of MoS chemical sensors investigated with phase-locked MoS.

In the present study, phase-dependent gas sensitivities of MoS chemical sensors were examined. While 1T-phase MoS (1T-MoS) has shown better chemical sensitivity than has 2H-phase MoS (2H-MoS), the instability of the 1T phase has been hindering applications of 1T-MoS as chemical sensors. Here, the chemical sensitivity of MoS locked in its 1T phase by using a ZnO phase lock was investigated.

Surface functionalization-induced photoresponse characteristics of monolayer MoS for fast flexible photodetectors.

Monolayered, semiconducting molybdenum disulfide (MoS2) is of considerable interest for its potential applications in next-generation flexible, wearable, and transparent photodetectors because it has outstanding physical properties coupled with unique atomically thin dimensions. However, there is still a lack of understanding in terms of the underlying mechanisms responsible for the photoresponse dynamics, which makes it difficult to identify the appropriate device design strategy for achieving a fast photoresponse time in MoS2 photodetectors. In this study, we investigate the importance of surface functionalization on controlling the charge carrier densities in a MoS2 monolayer and in turn the corresponding behavior of the photoresponse in relation to the position of the Fermi-level and the energy band structure.

Author Correction: Planar and van der Waals heterostructures for vertical tunnelling single electron transistors.

The original version of this Article contained an error in the spelling of the author Matthew Holwill, which was incorrectly given as Mathew Holwill. This has now been corrected in both the PDF and HTML versions of the Article.

Large area patterning of residue-free metal oxide nanostructures by liquid transfer imprint lithography.

One-dimensional (1D) and three-dimensional (3D) residue-free metal oxide patterns are directly fabricated over large areas using liquid transfer imprint lithography (LTIL) with an ultraviolet-curable metal oxide precursor resist. A 1D line or pillar array of metal oxides nano-patterns without a residual layer is formed by LTIL and annealing processes. A 3D layer-by-layer nanomesh structure is successfully constructed by repeating the LTIL method without a complex etching process.

Planar and van der Waals heterostructures for vertical tunnelling single electron transistors.

Despite a rich choice of two-dimensional materials, which exists these days, heterostructures, both vertical (van der Waals) and in-plane, offer an unprecedented control over the properties and functionalities of the resulted structures. Thus, planar heterostructures allow p-n junctions between different two-dimensional semiconductors and graphene nanoribbons with well-defined edges; and vertical heterostructures resulted in the observation of superconductivity in purely carbon-based systems and realisation of vertical tunnelling transistors. Here we demonstrate simultaneous use of in-plane and van der Waals heterostructures to build vertical single electron tunnelling transistors.

Balancing Charge Carrier Transport in a Quantum Dot P-N Junction toward Hysteresis-Free High-Performance Solar Cells.

In a quantum dot solar cell (QDSC) that has an inverted structure, the QD layers form two different junctions between the electron transport layer (ETL) and the other semiconducting QD layer. Recent work on an inverted-structure QDSC has revealed that the junction between the QD layers is the dominant junction, rather than the junction between the ETL and the QD layers, which is in contrast to the conventional wisdom. However, to date, there have been a lack of systematic studies on the role and importance of the QD heterojunction structure on the behavior of the solar cell and the resulting device performance.