Dispersed Power Production in Terms of the Potential of Briquettes Made from Straw and Willow as Renewable Sources of Energy.

The rapid development of agricultural technologies has triggered new possibilities of using plant waste as fuel. Briquetting plant material is one of the methods of using crop residue as permanent energy carriers. Nevertheless, to maintain the normalised properties of briquettes, their small-scale production should follow an established and well-considered deliberate technological process limiting production costs.

Effect of Stone Impacts on Various Ground Engaging Tools (Flexible/Stiff Tines and Coulter): Part I.

Analysis of the state of knowledge showed a gap in the description of tool-stone feedback. Therefore, the aim of this study was to investigate tool-stone interactions. Spherical-like silicate stones were hit by stiff and flexible tines with a duckfoot or a coulter.

Kinetics and Dynamics of the Stiff and Flexible Tines with the Duckfoot and the Coulter after Impact with Stones Embedded in Compacted Soil. Part II.

The kinetics and dynamics of the stiff and flexible tines with the duckfoot and the coulter after impact with stones embedded in compacted soil were examined. The beak of the duckfoot was positioned in the axis of the row of stones embedded in the soil at the depth of stones thickness. The coulter covered the stone or impact the edge of the stone halfway along its length.

Influence of Fraction Particle Size of Pure Straw and Blends of Straw with Calcium Carbonate or Cassava Starch on Pelletising Process and Pellet.

The aim of this study was to investigate the pressure agglomeration process of wheat straw (WS) and the blends of WS with calcium carbonate (CC) or cassava straw (CS) with a ratio of 6% wt./wt. from seven separate fractions with sizes in the range of 0.

Characterisation of Wheat Straw Pellets Individually and in Combination with Cassava Starch or Calcium Carbonate under Various Compaction Conditions: Determination of Pellet Strength and Water Absorption Capacity.

This study aimed to optimise the production conditions of wheat straw (WS) pellets and pellets with the additives of cassava starch (CS) or calcium carbonate (CC) based on the criteria of pellet strength and water absorption by crushed pellets. The pellets produced using a 2-10%-wt/wt additive ratio, material moisture of 10-30% w.b.