Effect of Surface Treatment with Zirconium Dioxide Slurry on the Bond Strength of Resin Cement to Ultratranslucent Zirconia.

This laboratory study aimed to evaluate the effects of zirconium dioxide (ZrO2) slurry surface treatment on the bond strength of ultratranslucent zirconia to resin cement using different ceramic primers. The surface morphology was evaluated by scanning electron microscopy (SEM) and atomic force microscopy (AFM), and the interface was evaluated by SEM. Additionally, the phase composition was analyzed by X-ray diffraction (XRD).

Is additional silane application necessary for a new silane-containing universal adhesive to bond to glass ceramics?

Objective: To evaluate the in vitro influence of prior silane application on the microshear bond strength (μSBS) of Scotchbond Universal Plus to glass ceramic.

Materials And Methods: Thirty blocks of lithium disilicate ceramic were etched with hydrofluoric acid for 20 s and distributed into Group 1 (no silane and no adhesive), Group 2 (adhesive), Group 3 (silane + adhesive). Three cylinders of resin cement were made on each ceramic block.

Are Universal Adhesives Effective for Bonding to Zirconia in the Long Term?

Background: The bond capacity of universal adhesives should be comparable to a specific primer for zirconia. Thus, this study evaluated the bond strength to zirconia of four universal adhesives and a zirconia primer over long-term storage.

Materials And Methods: The surfaces of 75 samples of zirconia were sandblasted with 50 µm aluminum oxide particles and then divided into groups ( = 15): G1 - Single Bond Universal (SBU); G2 - All Bond Universal; G3 - Peak Universal Bond; G4 - Ambar Universal (AU), and G5 - Z-Prime Plus (ZP).

Evaluation of the ceramic laminate veneer-tooth interface after different resin cement excess removal techniques.

Objectives: To compare, in vitro, resin cement excess removal techniques at the veneer-tooth interface.

Materials And Methods: Anterior human teeth were restored with ceramic veneers and randomly divided according to the following techniques (n = 10): removal of excess resin cement with brush and dental floss, followed by light-curing with Valo (Group 1) or Elipar (Group 2) for 1 min and 40 s; tack-curing with Valo (Group 3) or Elipar (Group 4) for 1 s; and tack-curing with Valo (Group 5) or Elipar (Group 6) for 5 s. The tack-curing was followed by removal of excess with probe and dental floss and light-curing for 1 min and 40 s.

Short-term Results of the Masking Effect of an Infiltrant Resin on Mild Molar Incisor Hypomineralization Lesions in Anterior Teeth.

This non-controlled clinical study evaluated the masking effect of an infiltrant resin on mild molar incisor hypomineralization (MIH) lesions. Thirty MIH-affected anterior teeth with creamy/ white opacities from 12 children aged 6-15 years received the application of an infiltrant resin (Icon- DMG). Standard photographs were taken before (T1), immediately after (T2), and 1 week after (T3) resin infiltration.