Phase Transformation Induced by High Pressure Torsion in the High-Entropy Alloy CrMnFeCoNi.

The forward and reverse phase transformation from face-centered cubic (fcc) to hexagonal close-packed (hcp) in the equiatomic high-entropy alloy (HEA) CrMnFeCoNi has been investigated with diffraction of high-energy synchrotron radiation. The forward transformation has been induced by high pressure torsion at room and liquid nitrogen temperature by applying different hydrostatic pressures and large shear strains. The volume fraction of hcp phase has been determined by Rietveld analysis after pressure release and heating-up to room temperature as a function of hydrostatic pressure.

Direct study of structural phase transformation in single crystalline bulk and thin film BaFeAs.

The ternary iron arsenide compound BaFeAs exhibits a structural phase transition from tetragonal to orthorhombic at a temperature of about 140 K. The twin lamellae arising below this transition temperature were studied in undoped single crystalline bulk and epitaxial thin film samples using electron backscatter diffraction in a scanning electron microscope equipped with a helium cryostat. Applying this technique on bulk single crystals a characteristic twin lamella size in the range of 0.

Revealing Grain Boundary Sliding from Textures of a Deformed Nanocrystalline Pd-Au Alloy.

Employing a recent modeling scheme for grain boundary sliding [Zhao et al. , doi:10.1002/adem.

Hall-plot of the phase diagram for Ba(Fe1-xCox)2As2.

The Hall effect is a powerful tool for investigating carrier type and density. For single-band materials, the Hall coefficient is traditionally expressed simply by , where e is the charge of the carrier, and n is the concentration. However, it is well known that in the critical region near a quantum phase transition, as it was demonstrated for cuprates and heavy fermions, the Hall coefficient exhibits strong temperature and doping dependencies, which can not be described by such a simple expression, and the interpretation of the Hall coefficient for Fe-based superconductors is also problematic.

Mechanical properties, structural and texture evolution of biocompatible Ti-45Nb alloy processed by severe plastic deformation.

Biocompatible β Ti-45Nb (wt%) alloys were subjected to different methods of severe plastic deformation (SPD) in order to increase the mechanical strength without increasing the low Young׳s modulus thus avoiding the stress shielding effect. The mechanical properties, microstructural changes and texture evolution were investigated, by means of tensile, microhardness and nanoindentation tests, as well as TEM and XRD. Significant increases of hardness and ultimate tensile strength up to a factor 1.