Preparation and Evaluation of Physical and Chemical Properties of Resin Plugging System Suitable for Formation Plugging of Malignant Lost Circulation.

Lost circulation is one of the important problems that restricts the speed and efficiency of oil and gas drilling and production. In this study, a resin plugging system was successfully developed for lost circulation formation. The resin plugging system showed excellent performance under high temperature and pressure conditions.

A Solidified Controllable Resin System Suitable for Fracture Cavity Formation Plugging and Its Performance Characterization.

Thermosetting resins have good temperature resistance and high strength and have been widely used as plugging agents in oil fields. However, the current resin materials have high costs, and unmodified thermosetting resins are brittle or have deteriorated properties such as flame retardancy after curing to form a crosslinked network structure. In this study, the resin was modified via physical blending.

High-Strength Controllable Resin Plugging Agent and Its Performance Evaluation for Fractured Formation.

Lost circulation is a common and complicated situation in drilling engineering. Serious lost circulation may lead to pressure drop in the well, affect normal drilling operations, and even cause wellbore instability, formation fluid flooding into the wellbore, and blowout. Therefore, appropriate preventive and treatment measures need to be taken to ensure the safe and smooth operation of drilling operations.

Nanorod Diffusion near the Solid-Liquid Interface with Varied Wall Nonuniformity.

The complex diffusion behaviors of rod-shaped nanoparticles near the solid-liquid interface are closely related to various biological processes and technological applications. Despite recent advancements in understanding the diffusion dynamics of nanoparticles near some specific solid-liquid interfaces, systematical studies to tune the interfacial interaction or fabricating nonuniform wall to see their effects on the nanorod (NR) diffusion are still lacking. This work utilized molecular dynamics simulations to investigate the rotational and translational diffusion dynamics of a single NR near the solid-liquid interface.

Preparation of Encapsulated Breakers for Polymer Gels and Evaluation of Their Properties.

A common problem associated with conventional gel breakers is that they can cause a premature reduction in gel viscosity at high temperatures. To address this, a urea-formaldehyde (UF) resin and sulfamic acid (SA) encapsulated polymer gel breaker was prepared via in situ polymerization with UF as the capsule coat and SA as the capsule core; this breaker was able to withstand temperatures of up to 120-140 °C. The encapsulated breaker was characterized using scanning electron microscopy (SEM), infrared spectroscopy (FT-IR), and thermogravimetric (TG) analysis.

Polymer Gels Used in Oil-Gas Drilling and Production Engineering.

Polymer gels are widely used in oil-gas drilling and production engineering for the purposes of conformance control, water shutoff, fracturing, lost circulation control, etc. Here, the progress in research on three kinds of polymer gels, including the in situ crosslinked polymer gel, the pre-crosslinked polymer gel and the physically crosslinked polymer gel, are systematically reviewed in terms of the gel compositions, crosslinking principles and properties. Moreover, the advantages and disadvantages of the three kinds of polymer gels are also comparatively discussed.

Types and Performances of Polymer Gels for Oil-Gas Drilling and Production: A Review.

Polymer gels with suitable viscoelasticity and deformability have been widely used for formation plugging and lost circulation control, profile control, and water shutoff. This article systematically reviews the research progress on the preparation principle, temperature resistance, salt resistance, and mechanical properties of the ground and in situ crosslinked polymer gels for oil-gas drilling and production engineering. Then, it comparatively analyzes the applicable conditions of the two types of polymer gel.

Status and Prospect of Drilling Fluid Loss and Lost Circulation Control Technology in Fractured Formation.

Lost circulation in fractured formation is the first major technical problem that restricts improvements in the quality and efficiency of oil and gas drilling engineering. Improving the success rate of one-time lost circulation control is an urgent demand to ensure "safe, efficient and economic" drilling in oilfields all over the world. In view of the current situation, where drilling fluid loss occurs and the plugging mechanism of fractured formation is not perfect, this paper systematically summarizes the drilling fluid loss mechanism and model of fractured formation.

Experimental Study on Physicochemical Properties of a Shear Thixotropic Polymer Gel for Lost Circulation Control.

Polymer gel lost circulation control technology is a common and effective technique to control fractured lost circulation. The performance of a lost circulation control agent is the key to the success of lost circulation control techniques. In this study, rheological tests were used to study the physical and chemical properties of a shear thixotropic polymer gel system, such as anti-dilution, high temperature resistance and high salt resistance.

Effect of a Synthetic Nano-CaO-Al₂O₃-SiO₂-H₂O Gel on the Early-Stage Shrinkage Performance of Alkali-Activated Slag Mortars.

The relatively high shrinkage of the alkali-activated slag (AAS) has restricted its application as a widely-used building material. This research attempts to study the effect of a hydrothermally synthesized C-A-S-H gel, which has a similar composition to that of the main AAS product, on the shrinkage performance of the AAS. The C-A-S-H nano-particles were mixed into AAS mortars in a proportion ranging from 1 wt % to 5 wt % using two different methods, and the drying and autogenous shrinkage ratio of modified AAS mortars were measured at various ages.

Synthesis of Nanoscale CaO-Al₂O₃-SiO₂-H₂O and Na₂O-Al₂O₃-SiO₂-H₂O Using the Hydrothermal Method and Their Characterization.

C-A-S-H (CaO-Al₂O₃-SiO₂-H₂O) and N-A-S-H (Na₂O-Al₂O₃-SiO₂-H₂O) have a wide range of chemical compositions and structures and are difficult to separate from alkali-activated materials. Therefore, it is difficult to analyze their microscopic properties directly. This paper reports research on the synthesis of C-A-S-H and N-A-S-H particles with an average particle size smaller than 300 nm by applying the hydrothermal method.

A Vertically Integrated CMOS Microsystem for Time-Resolved Fluorescence Analysis.

We describe a two-chip micro-scale time-resolved fluorescence analyzer integrating excitation, detection, and filtering. A new 8×8 array of drivers realized in standard low-voltage 0.35-μm complementary metal-oxide semiconductor is bump-bonded to AlInGaN blue micro-pixellated light-emitting diodes (micro-LEDs).