Deep Serratus Anterior Plane Block for Multimodal Analgesia in Minimally Invasive Mitral Valve Surgery Performed via Right Anterior Mini-Thoracotomy.

Objective: This study investigated if the serratus anterior plane block (SAPB) within a multimodal analgesia scheme would reduce acute post-operative pain and intravenous opioid consumption in patients admitted to the intensive care unit after isolated minimally invasive mitral valve surgery.

Design: Retrospective study.

Setting: Patients were admitted to the intensive care unit (ICU) of the University Hospital of Siena (Italy).

Comparison of Bioengineered Scaffolds for the Induction of Osteochondrogenic Differentiation of Human Adipose-Derived Stem Cells.

Osteochondral lesions may be due to trauma or congenital conditions. In both cases, therapy is limited because of the difficulty of tissue repair. Tissue engineering is a promising approach that relies on designed scaffolds with variable mechanical attributes to favor cell attachment and differentiation.

Three-Dimensional Electrically Conductive Scaffolds to Culture Cardiac Progenitor Cells.

Three-dimensional (3D) scaffolds provide cell support while improving tissue regeneration through amplified cellular responses between implanted materials and native tissues. So far, highly conductive cardiac, nerve, and muscle tissues have been engineered by culturing stem cells on electrically inert scaffolds. These scaffolds, even though suitable, may not be very useful compared to the results shown by cells when cultured on conductive scaffolds.

Machine learning-enhanced HRCT analysis for diagnosis and severity assessment in pediatric asthma.

Objectives: Chest high-resolution computed tomography (HRCT) is conditionally recommended to rule out conditions that mimic or coexist with severe asthma in children. However, it may provide valuable insights into identifying structural airway changes in pediatric patients. This study aims to develop a machine learning-based chest HRCT image analysis model to aid pediatric pulmonologists in identifying features of severe asthma.

Effect of in-line filtration in newborns: study protocol of the Intravenous Neonatal Central Access Safety (INCAS) randomized controlled trial.

Background: Particulate contamination due to infusion therapy (administration of parenteral nutrition and medications) carries a potential health risk for infants in neonatal intensive care units (NICUs). This particulate consists of metals, drug crystals, glass fragments, or cotton fibers and can be generated by drug packaging, incomplete reconstitution, and chemical incompatibilities. In-line filters have been shown to remove micro-organisms, endotoxin, air, and particles in critically ill adults and older infants, but its benefits in newborn remain to be demonstrated.

Biophotons: New Experimental Data and Analysis.

Biophotons are an ultra-weak emission of photons in the visible energy range from living matter. In this work, we study the emission from germinating seeds using an experimental technique designed to detect light of extremely small intensity. The emission from lentil seeds and single bean was analyzed during the whole germination process in terms of the different spectral components through low pass filters and the different count distributions in the various stages of the germination process.

Frequency-Dependent Squeezed Vacuum Source for the Advanced Virgo Gravitational-Wave Detector.

In this Letter, we present the design and performance of the frequency-dependent squeezed vacuum source that will be used for the broadband quantum noise reduction of the Advanced Virgo Plus gravitational-wave detector in the upcoming observation run. The frequency-dependent squeezed field is generated by a phase rotation of a frequency-independent squeezed state through a 285 m long, high-finesse, near-detuned optical resonator. With about 8.

An Observational Study to Develop a Predictive Model for Bacterial Pneumonia Diagnosis in Severe COVID-19 Patients-C19-PNEUMOSCORE.

In COVID-19 patients, antibiotics overuse is still an issue. A predictive scoring model for the diagnosis of bacterial pneumonia at intensive care unit (ICU) admission would be a useful stewardship tool. We performed a multicenter observational study including 331 COVID-19 patients requiring invasive mechanical ventilation at ICU admission; 179 patients with bacterial pneumonia; and 152 displaying negative lower-respiratory samplings.

Poly(ethylene glycol) Diacrylate Hydrogel with Silver Nanoclusters for Water Pb(II) Ions Filtering.

Poly(ethylene glycol) diacrylate (PEGDA) hydrogels modified with luminescent silver nanoclusters (AgNCs) are synthesized by a photo-crosslinking process. The hybrid material thus obtained is employed to filter Pb(II) polluted water. Under the best conditions, the nanocomposite is able to remove up to 80-90% of lead contaminant, depending on the filter composition.

Electrically conductive scaffolds mimicking the hierarchical structure of cardiac myofibers.

Electrically conductive scaffolds, mimicking the unique directional alignment of muscle fibers in the myocardium, are fabricated using the 3D printing micro-stereolithography technique. Polyethylene glycol diacrylate (photo-sensitive polymer), Irgacure 819 (photo-initiator), curcumin (dye) and polyaniline (conductive polymer) are blended to make the conductive ink that is crosslinked using free radical photo-polymerization reaction. Curcumin acts as a liquid filter and prevents light from penetrating deep into the photo-sensitive solution and plays a central role in the 3D printing process.

Polarization Control in Integrated Graphene-Silicon Quantum Photonics Waveguides.

We numerically investigated the use of graphene nanoribbons placed on top of silicon-on-insulator (SOI) strip waveguides for light polarization control in silicon photonic-integrated waveguides. We found that two factors mainly affected the polarization control: the graphene chemical potential and the geometrical parameters of the waveguide, such as the waveguide and nanoribbon widths and distance. We show that the graphene chemical potential influences both TE and TM polarizations almost in the same way, while the waveguide width tapering enables both TE-pass and TM-pass polarizing functionalities.

From Soft to Hard Biomimetic Materials: Tuning Micro/Nano-Architecture of Scaffolds for Tissue Regeneration.

Failure of tissues and organs resulting from degenerative diseases or trauma has caused huge economic and health concerns around the world. Tissue engineering represents the only possibility to revert this scenario owing to its potential to regenerate or replace damaged tissues and organs. In a regeneration strategy, biomaterials play a key role promoting new tissue formation by providing adequate space for cell accommodation and appropriate biochemical and biophysical cues to support cell proliferation and differentiation.

Intrinsically Conductive Polymers for Striated Cardiac Muscle Repair.

One of the most important features of striated cardiac muscle is the excitability that turns on the excitation-contraction coupling cycle, resulting in the heart blood pumping function. The function of the heart pump may be impaired by events such as myocardial infarction, the consequence of coronary artery thrombosis due to blood clots or plaques. This results in the death of billions of cardiomyocytes, the formation of scar tissue, and consequently impaired contractility.

Extrinsically Conductive Nanomaterials for Cardiac Tissue Engineering Applications.

Myocardial infarction (MI) is the consequence of coronary artery thrombosis resulting in ischemia and necrosis of the myocardium. As a result, billions of contractile cardiomyocytes are lost with poor innate regeneration capability. This degenerated tissue is replaced by collagen-rich fibrotic scar tissue as the usual body response to quickly repair the injury.

Constraints on Cosmic Strings Using Data from the Third Advanced LIGO-Virgo Observing Run.

We search for gravitational-wave signals produced by cosmic strings in the Advanced LIGO and Virgo full O3 dataset. Search results are presented for gravitational waves produced by cosmic string loop features such as cusps, kinks, and, for the first time, kink-kink collisions. A template-based search for short-duration transient signals does not yield a detection.

Biophotons and Emergence of Quantum Coherence-A Diffusion Entropy Analysis.

We study the emission of photons from germinating seeds using an experimental technique designed to detect light of extremely small intensity. We analyze the dark count signal without germinating seeds as well as the photon emission during the germination process. The technique of analysis adopted here, called diffusion entropy analysis (DEA) and originally designed to measure the temporal complexity of astrophysical, sociological and physiological processes, rests on Kolmogorov complexity.

Metal Nanostructures for Environmental Pollutant Detection Based on Fluorescence.

Heavy metal ions and pesticides are extremely dangerous for human health and environment and an accurate detection is an essential step to monitor their levels in water. The standard and most used methods for detecting these pollutants are sophisticated and expensive analytical techniques. However, recent technological advancements have allowed the development of alternative techniques based on optical properties of noble metal nanomaterials, which provide many advantages such as ultrasensitive detection, fast turnover, simple protocols, in situ sampling, on-site capability and reduced cost.

Quantum Backaction on kg-Scale Mirrors: Observation of Radiation Pressure Noise in the Advanced Virgo Detector.

The quantum radiation pressure and the quantum shot noise in laser-interferometric gravitational wave detectors constitute a macroscopic manifestation of the Heisenberg inequality. If quantum shot noise can be easily observed, the observation of quantum radiation pressure noise has been elusive, so far, due to the technical noise competing with quantum effects. Here, we discuss the evidence of quantum radiation pressure noise in the Advanced Virgo gravitational wave detector.

Stoichiometric BiSe topological insulator ultra-thin films obtained through a new fabrication process for optoelectronic applications.

A new fabrication process is developed for growing BiSe topological insulators in the form of nanowires/nanobelts and ultra-thin films. It consists of two consecutive procedures: first BiSe nanowires/nanobelts are deposited by standard catalyst free vapour-solid deposition on different substrates positioned inside a quartz tube. Then, the BiSe, stuck on the inner surface of the quartz tube, is re-evaporated and deposited in the form of ultra-thin films on new substrates at a temperature below 100 °C, which is of relevance for flexible electronic applications.

Polystyrene Opals Responsive to Methanol Vapors.

Photonic crystals (PCs) show reflectance spectra depending on the geometrical structure of the crystal, the refractive index (), and the light incident angle, according to the Bragg-Snell law. Three-dimensional photonic crystals (3D-PCs) composed of polymeric sub-micrometer spheres, are arranged in an ordered face cubic centered () lattice and are good candidates for vapor sensing by exploiting changes of the reflectance spectra. We synthesized high quality polystyrene (PS) 3D-PCs, commonly called opals, with a filling factor near to the ideal value of 0.

Plasmonic Sensor Based on Interaction between Silver Nanoparticles and Ni or Co in Water.

Silver nanoparticles capped with 3-mercapto-1propanesulfonic acid sodium salt (AgNPs-3MPS), able to interact with Ni or Co, have been prepared to detect these heavy metal ions in water. This system works as an optical sensor and it is based on the change of the intensity and shape of optical absorption peak due to the surface plasmon resonance (SPR) when the AgNPs-3MPS are in presence of metals ions in a water solution. We obtain a specific sensitivity to Ni and Co up to 500 ppb (part per billion).

Scaffold-in-Scaffold Potential to Induce Growth and Differentiation of Cardiac Progenitor Cells.

The design of reliable biocompatible and biodegradable scaffolds remains one of the most important challenges for tissue engineering. In fact, properly designed scaffolds must display an adequate and interconnected porosity to facilitate cell spreading and colonization of the inner layers, and must release physical signals concurring to modulate cell function to ultimately drive cell fate. In this study, a combination of optimal mechanical and biochemical properties has been considered to design a one-component three-dimensional (3D) multitextured hydrogel scaffold to favor cell-scaffold interactions.

Anodization-based process for the fabrication of all niobium nitride Josephson junction structures.

We studied the growth and oxidation of niobium nitride (NbN) films that we used to fabricate superconductive tunnel junctions. The thin films were deposited by dc reactive magnetron sputtering using a mixture of argon and nitrogen. The process parameters were optimized by monitoring the plasma with an optical spectroscopy technique.

Hydrophilic silver nanoparticles with tunable optical properties: application for the detection of heavy metals in water.

Due their excellent chemo-physical properties and ability to exhibit surface plasmon resonance, silver nanoparticles (AgNPs) have become a material of choice in various applications, such as nanosensors, electronic devices, nanobiotechnology and nanomedicine. In particular, from the environmental monitoring perspective, sensors based on silver nanoparticles are in great demand because of their antibacterial and inexpensive synthetic method. In the present study, we synthesized AgNPs in water phase using silver nitrate as precursor molecules, hydrophilic thiol (3-mercapto-1-propanesulfonic acid sodium salt, 3MPS) and sodium borohydride as capping and reducing agents, respectively.