Seeding Janus Zn-Fe Diatomic Pairs on a Hollow Nanobox for Potent Catalytic Therapy.

Dual atomic nanozymes (DAzymes) are promising for applications in the field of tumor catalytic therapy. Here, integrating with ultrasmall FeC nanoclusters, asymmetric coordination featuring Janus Zn-Fe dual-atom sites with an ON-Fe-Zn-N moiety embedded in a carbon vacancy-engineered hollow nanobox (Janus ZnFe DAs-FeC) was elaborately developed. Theoretical calculation revealed that the synergistic effects of Zn centers acting as both adsorption and active sites, oxygen-heteroatom doping, carbon vacancy, and FeC nanoclusters jointly downshifted the d-band center of Fe 3d orbitals, optimizing the desorption behaviors of intermediates *OH, thereby significantly promoting catalytic activity.

Crystalline/Amorphous Interface Engineering and d-sp Orbital Hybridization Synergistically Boosting the Electrocatalytic Performance of PdCu Bimetallene toward Formic Acid-Assisted Overall Water Splitting.

Advanced electrocatalysts capable of bifunctional catalysis for formic acid oxidation (FAOR) and hydrogen evolution reaction (HER) have garnered significant attention due to their exceptional energy efficiency. In this research, we have meticulously designed a PdCu bimetallene characterized by numerous crystalline/amorphous (c/a) interfaces and robust d-sp orbital hybridization, achieved by integrating the p-block metalloid boron within the PdCu matrix (B-PdCu-c/a). The B-PdCu-c/a bimetallene revealed a multitude of surface atoms and unsaturated defect sites, offering abundant catalytic active sites and an optimized electronic structure.

Synthesis of MoS/MoO nano-heterojunction towards enhanced photocatalytic activity under LED light irradiation oxidation sintering.

The MoS/MoO nano-heterojunction photocatalyst was synthesized the oxidation sintering method. The properties of the samples were characterized by XRD, SEM, EDX, TEM, UV-vis, PL, FT-IR, BET and electrochemical techniques. The MoS/MoO nano-heterojunction (MS-400) exhibited significantly better photocatalytic activity toward Rhodamine B degradation (0.

Preparation of fibre-reinforced PLA-collagen@PLA-PCL@PCL-gelatin three-layer vascular graft by EDC/NHS cross-linking and its performance study.

In this study, a three-layer small diameter artificial vascular graft with a structure similar to that of natural blood vessels was first constructed by triple-step electrospinning technology, in which polylactic acid (PLA) and collagen (COL) were used for the inner layer, polylactic acid and polycaprolactone (PCL) was used for the middle layer and polycaprolactone and gelatin was used for the outer layer. The properties of the artificial vascular graft were adjusted by the EDC/NHS cross-linking agent through the reaction between the collagen or gelatine and EDC/NHS. The mechanical and hydrophilic properties of the cross-linked artificial vessels were substantially enhanced, with a maximum stress of 9.

A defect-enriched PdMo bimetallene for ethanol oxidation reaction and 4-nitrophenol reduction.

A defect-enriched PdMo bimetallene (d-PdMo) was prepared by a one-pot wet chemical reaction followed by post-treatment of oxidative etching. The introduction of defects can tailor the electronic structure of PdMo bimetallene and the prepared d-PdMo bimetallene exhibited excellent performance in the ethanol oxidation reaction (EOR) and 4-nitrophenol (4-NP) reduction reaction.

Enhancing Overall Water Splitting via Anion and Cation Synergistical Modulation in NiS Amorphous Compound.

Designing and synthesizing cost-effective catalysts that exhibit excellent performance of both the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is a formidable task in the field of electrocatalysis. Herein, we present a Fe- and P-codoped NiS amorphous film catalyst (FeNiSP) via meticulous control over the cations and anions of metal compounds. The doped Fe and P increases active sites, reduces charge transfer resistance, and modulates electronic structures of the NiS matrix.

Construction of PCL-collagen@PCL@PCL-gelatin three-layer small diameter artificial vascular grafts by electrospinning.

The demand for artificial vascular grafts in clinical applications is increasing, and it is urgent to design a tissue-engineered vascular graft with good biocompatibility and sufficient mechanical strength. In this study, three-layer small diameter artificial vascular grafts were constructed by electrospinning. Polycaprolactone (PCL) and collagen (COL) were used as the inner layer to provide good biocompatibility and cell adhesion, the middle layer was PCL to improve the mechanical properties, and gelatin (GEL) and PCL were used to construct the outer layer for further improving the mechanical properties and biocompatibility of the vascular grafts in the human body environment.

Fabrication of FA/HA-functionalized carbon dots for human breast cancer cell targeted imaging.

Green fluorescent carbon dots (CDs) were prepared by one-step hydrothermal method and then modified into folic acid functionalized carbon dots (FA-CDs) and hyaluronic acid functionalized carbon dots (HA-CDs) with targeted function to study their application in breast cancer cells imaging. The microstructure of the CDs observed through TEM showed the CDs with a scale of 2.69 nm.

Tasseled Crop Rows Detection Based on Micro-Region of Interest and Logarithmic Transformation.

Machine vision-based navigation in the maize field is significant for intelligent agriculture. Therefore, precision detection of the tasseled crop rows for navigation of agricultural machinery with an accurate and fast method remains an open question. In this article, we propose a new crop rows detection method at the tasseling stage of maize fields for agrarian machinery navigation.

Enhanced photocatalytic hydrogen production of MoS sheet/carbon nanofiber using rapid electron transport of Mo and carbon nanofiber.

Normal MoS exhibits a low photocatalytic performance for H production owing to the deficiency of the active sites and the poor electrical conductance. In this work, MoS anchored on the surface of the carbon nanofibers was designed to enhance the activity of the exposed edge and the electrical conductivity at the same time. The oxidation of the surface Mo atoms increases the activity of the exposed edge of the MoS.

Preparation and biological properties of ZnO/hydroxyapatite/chitosan-polyethylene oxide@gelatin biomimetic composite scaffolds for bone tissue engineering.

To imitate the composition of natural bone and further improve the biological property of the materials, ZnO/hydroxyapatite/chitosan-polyethylene oxide@gelatin (ZnO/HAP/CS-PEO@GEL) composite scaffolds were developed. The core-shell structured chitosan-polyethylene oxide@gelatin (CS-PEO@GEL) nanofibers which could form the intramolecular hydrogen bond and achieve an Arg-Gly-Asp (RGD) polymer were first prepared by coaxial electrospinning to mimic the extracellular matrix. To further enhance biological activity, hydroxyapatite (HAP) was grown on the surface of the CS-PEO@GEL nanofibers using chemical deposition and ZnO particles were then evenly distributed on the surface of the above composite materials using RF magnetron sputtering.

A neural decoding algorithm that generates language from visual activity evoked by natural images.

Transforming neural activities into language is revolutionary for human-computer interaction as well as functional restoration of aphasia. Present rapid development of artificial intelligence makes it feasible to decode the neural signals of human visual activities. In this paper, a novel Progressive Transfer Language Decoding Model (PT-LDM) is proposed to decode visual fMRI signals into phrases or sentences when natural images are being watched.

A dual-channel language decoding from brain activity with progressive transfer training.

When we view a scene, the visual cortex extracts and processes visual information in the scene through various kinds of neural activities. Previous studies have decoded the neural activity into single/multiple semantic category tags which can caption the scene to some extent. However, these tags are isolated words with no grammatical structure, insufficiently conveying what the scene contains.

Hyaluronic acid conjugated nitrogen-doped graphene quantum dots for identification of human breast cancer cells.

Accurate distinguish of cancer cells through fluorescence plays an important role in cancer diagnosis. Here we synthesized a blue fluorescent nitrogen-doped graphene quantum dots (N-GQDs) from citric acid and diethylamine via one-step hydrothermal synthesis method which was simple and quick to avoid by-products, and highlighted the binding sites to achieve precise combination. Due to the nitrogen element doping, amide II bond was amply obtained and abundant binding sites were provided for hyaluronic acid (HA) conjugation.

Tracing the ionic evolution during ILG induced phase transformation in strontium cobaltite thin films.

Ionic liquid gating (ILG) that drives the ions incorporate into or extract from the crystal lattice, has emerged as a new pathway to design materials. Although many intriguing emergent phenomena, novel physical properties and functionalities have been obtained, the gating mechanism governing the ion and charge transport remains unexplored. Here, by using the model system of brownmillerite SrCoO and the corresponding electric-field controlled tri-state phase transformation among the pristine SrCoO, hydrogenated HSrCoO and oxidized perovskite SrCoO through the dual ion switch, the ionic diffusion and electronic transport processes were carefully investigated.

Phase junction enhanced photocatalytic activity of GaO nanorod arrays on flexible glass fiber fabric.

GaO nanostructures hold great potential applications in photocatalytic fields due to their stability, high efficiency and environmental friendliness. The construction of phase junction has been proved to be one of the most effective strategies for enhancing GaO photocatalytic activity. However, the influence of the formation process at the interface of the phase junction on the photocatalytic activity of GaO nanostructures is far less well understood.

Improved charge injection of edge aligned MoS/MoO hybrid nanosheets for highly robust and efficient electrocatalysis of H production.

Molybdenum disulfide (MoS2) can be an efficient electro-catalyst for the hydrogen evolution reaction (HER) as an alternative to precious metals, but significant efforts are still needed to further improve its efficiency. Among various approaches, the formation of edge aligned MoS2 on an electrically conductive support is highly promising for cost-effective H2 production. Nevertheless, catalysis is highly impeded by the poor charge transport between the electrode materials and also between the multilayers of MoS2.

Folic acid-conjugated nitrogen-doped graphene quantum dots as a fluorescent diagnostic material for MCF-7 cells.

This paper reports the preparation and application of folic acid-conjugated nitrogen-doped graphene quantum dots (N-GQDs) as a fluorescent diagnostic material for MCF-7 cells of breast cancer. N-GQDs were prepared by a hydrothermal method using citric acid as the carbon source and diethylamine as the nitrogen source. The doping of different amounts of nitrogen content was effectively controlled by diethylamine.

Dispersing gold nanoparticles on thiolated polyaniline-multiwalled carbon nanotubes for development of an indole-3-acetic acid amperometric immunosensor.

An amperometric immunosensor based on new thiolated bionanocomposite with a high dispersion of gold nanoparticles (AuNPs) for the sensitive detection of indole-3-acetic acid (IAA) is being reported herein. Briefly, a thiolated nanocomposite was prepared the microwave-assisted thiol-ene reaction of 2,5-dimercapto-1,3,4-thiadiazole (DMcT) with oxidized polyaniline (PANI), which was synthesized in the presence of multiwalled carbon nanotubes (MWCNTs), yielding thiolated polyaniline (TPANI)-MWCNTs. Further, AuNPs were deposited on the TPANI-MWCNTs by microwave-assisted method to obtain a AuNPs/TPANI-MWCNTs nanocomposite.

Efficient Water Transport and Solar Steam Generation Radially, Hierarchically Structured Aerogels.

A nature-inspired water-cycling system, akin to trees, to perform effective water and solar energy management for photosynthesis and transpiration is considered to be a promising strategy to solve water scarcity issues globally. However, challenges remain in terms of the relatively low transport rate, short transport distance, and unsatisfactory extraction efficiency. Herein, enlightened by conifer tracheid construction, an efficient water transport and evaporation system composed of a hierarchical structured aerogel is reported.

Biomimetic composite scaffold of hydroxyapatite/gelatin-chitosan core-shell nanofibers for bone tissue engineering.

Good biocompatibility and osteogenesis of three-dimensional porous scaffolds are critical for bone tissue engineering. In this work, biomimetic hydroxyapatite/gelatin-chitosan core-shell nanofibers composite scaffolds have been fabricated to mimic both the specific structure and the chemical composition of natural bone. The coaxial electrospinning technique was introduced to prepare gelatin-chitosan core-shell structured nanofibers mat which formed three-dimensional porous structure for promoting cells growth.

Self-Powered Ultraviolet Photodetector with Superhigh Photoresponsivity (3.05 A/W) Based on the GaN/Sn:GaO pn Junction.

Ultraviolet (UV) radiation has a variety of impacts including the health of humans, the production of crops, and the lifetime of buildings. Based on the photovoltaic effect, self-powered UV photodetectors can measure and monitor UV radiation without any power consumption. However, the current low photoelectric performance of these detectors has hindered their practical use.

Enhanced electrocatalytic performance of platinum nanoparticles on thiolated polyaniline-multiwalled carbon nanotubes for methanol oxidation.

Pt nanoparticles (PtNPs) well-dispersed on thiolated polyaniline (TPANI)-multiwalled carbon nanotubes (MWCNTs) were prepared for enhanced electrocatalytic oxidation of methanol in acidic media. Briefly, the preparation of nanocomposites was carried out microwave-assisted thiol-ene reaction of 2,5-dimercapto-1,3,4-thiadiazole (DMcT) with oxidized PANI, which was synthesized in the presence of MWCNTs, yielding TPANI-MWCNTs; then, PtNPs were deposited on TPANI-MWCNTs by a microwave-assisted method to obtain PtNPs/TPANI-MWCNT nanohybrids. Fourier transform infrared spectroscopy, cyclic voltammetry (CV), transmission electron microscopy (TEM), X-ray diffraction (XRD), thermogravimetric analysis (TGA) and inductively coupled plasma-atom emission spectroscopy were used to study relevant nanohybrid properties.

Proximity exchange induced gap opening and topological feature in graphene/1T'-MX (M = Mo,W; X = S,Se,Te) Dirac heterostructures.

By using first-principles calculations, we demonstrate the influence of proximity effect on the band structures of heterostructures formed by graphene stacking on a two dimensional (2D) topological insulator (TI) 1T'-MX. The interlayer distance d between graphene and TI decreases with the enhancement of the intrinsic lattice anisotropy of 1T'-MX, which determines different strength of the interlayer proximity interaction. The bandgap can be opened by the proximity exchange.

Evolution of local wrinkles near defects on stiff film/compliant substrate.

Disordered wrinkles are widely observed in stiff film deposited onto a thermally expanded polymer when compressive stress exceeds the critical wrinkling stress of the film. Highly ordered wrinkles can be fabricated by introducing regularly arranged patterns on the polymer before deposition. However, the study on the morphological evolution of localized wrinkling patterns near defects on the stiff film/compliant substrate is neglected.